AlertDialogType Cancel 取消 AllowedDnsUiController The address does not look like a valid IP address 该地址看起来不是有效的 IP 地址 New DNS server added: %1 已添加新的 DNS 服务器：%1 DNS server already exists: %1 DNS 服务器已存在：%1 DNS server removed: %1 已移除 DNS 服务器：%1 Can't open file: %1 无法打开文件: %1 Failed to parse JSON data from file: %1 JSON解析失败，文件: %1 The JSON data is not an array in file: %1 文件中的JSON数据不是一个数组，文件: %1 Import completed 完成导入 Export completed 完成导出 ApiAccountInfoModel Active 有效 Inactive 无效 %1 out of %2 %1 / %2 ApiServicesModel <p><a style="color: #EB5757;">Not available in your region. If you have VPN enabled, disable it, return to the previous screen, and try again.</a> <p><a style="color: #EB5757;">您所在的地区不可用。如果您已启用 VPN，请将其关闭，返回上一屏幕后重试。</a> AppSplitTunnelingUiController Application added: %1 已添加应用：%1 The application has already been added 该应用已添加 The selected applications have been added 已添加所选应用 Application removed: %1 已移除应用：%1 CaptchaDialogType Enter the digits from the image to continue 请输入图片中的数字以继续 Digits from the image 图片中的数字 _ _ _ _ _ _ _ _ _ _ _ _ Continue 继续 ConnectButton Unable to disconnect during configuration preparation 配置准备期间无法断开连接 ConnectionTypeSelectionDrawer Add new connection 添加新连接 Configure your server 配置您的服务器 Open config file, key or QR code 配置文件，授权码或二维码 ConnectionUiController Connecting... 连接中 Connected 已连接 Reconnecting... 重连中 Connect 连接 Disconnecting... 断开中 Preparing... 准备中 ContextMenuType C&ut 剪切 &Copy 拷贝 &Paste 粘贴 &SelectAll 全选 CountrySearchRow Country or region 国家或地区 FavoriteButton Remove from favorites 从收藏中移除 Add to favorites 添加到收藏 HomeContainersListView Unable change protocol while there is an active connection 已建立连接时无法更改服务器配置 HomeServerSummary AmneziaWG 2.0 is outdated and no longer supported. Continued use requires a fresh installation of the AmneziaWG 3.1 container. AmneziaWG 2.0 已过时且不再受支持。继续使用需要全新安装 AmneziaWG 3.1 容器。 HomeSplitTunnelingDrawer Split tunneling 隧道分离 Allows you to connect to some sites or applications through a VPN connection and bypass others 允许您通过 VPN 连接连接到某些站点或应用程序，并绕过其他站点或应用程序 Split tunneling on the server 服务器上的分割隧道 Enabled Can't be disabled for current server 已启用 无法禁用当前服务器 Site-based split tunneling 基于网站的隧道分离 Enabled 开启 Disabled 禁用 App-based split tunneling 基于应用的隧道分离 ImportUiController Scanned %1 of %2. 扫描 %1 of %2. InstallUiController %1 installed successfully. %1 安装成功。 %1 is already installed on the server. 服务器上已经安装 %1。 Added containers that were already installed on the server 添加已安装在服务器上的容器 Already installed containers were found on the server. All installed containers have been added to the application 在服务上发现已经安装协议并添加至应用 Settings updated successfully 配置更新成功 Server '%1' was rebooted 服务器 '%1' 已重新启动 Server '%1' was removed 已移除服务器 '%1' All containers from server '%1' have been removed 服务器 '%1' 的所有容器已移除 %1 has been removed from the server '%2' %1 已从服务器 '%2' 上移除 %1 cached profile cleared 已清除 %1 的缓存配置 Please login as the user 请以用户身份登录 Server added successfully 增加服务器成功 InstalledAppsDrawer Choose application 选择应用 application name 应用名称 Add selected 添加所选 IpSplitTunnelingController Failed to parse JSON data: %1 解析 JSON 数据失败：%1 The JSON data is not an array JSON 数据不是数组 IpSplitTunnelingUiController New site added: %1 已经添加新网站: %1 Site removed: %1 已移除网站: %1 Site list cleared! 站点列表已清空！ Can't open file: %1 无法打开文件: %1 Import completed 完成导入 Export completed 完成导出 ListItemType Available in Premium Premium 可用 MinMaxRowType Min 最小值 Max 最大值 NavigationBarType Back 返回 NotificationHandler AmneziaVPN AmneziaVPN VPN Connected 已连接到VPN VPN Disconnected 已从VPN断开 AmneziaVPN notification AmneziaVPN 提示 Unsecured network detected: 发现不安全网络 PageDeinstalling Removing services from %1 正从 %1 移除服务 Usually it takes no more than 5 minutes 大约5分钟之内完成 PageDevMenu Gateway endpoint Gateway endpoint Save 保存 Settings saved 配置已保存 Dev gateway environment Dev gateway environment PageHome Logging enabled 日志记录已启用 Dev gateway enabled Dev gateway enabled Split tunneling enabled 用户分隔隧道已启用 Split tunneling disabled 分隔隧道已禁用 Select an installed protocol or add a new one 选择已安装的协议或添加新协议 Unable change protocol while trying to make an active connection 正在尝试建立连接时无法更改协议 Cannot change protocol during active connection 存在活动连接时无法更改协议 Back 返回 VPN protocol VPN协议 Servers 服务器 PageProtocolAwgClientSettings AmneziaWG settings AmneziaWG 配置 MTU MTU I1 - First special junk packet I1 - First special junk packet I2 - Second special junk packet I2 - Second special junk packet I3 - Third special junk packet I3 - Third special junk packet I4 - Fourth special junk packet I4 - Fourth special junk packet I5 - Fifth special junk packet I5 - Fifth special junk packet HeaderProtectionKey HeaderProtectionKey ContentPaddingAddition - Content padding addition ContentPaddingAddition - Content padding addition RekeyAfterTime - Rekey after time RekeyAfterTime - Rekey after time RekeyTimeout - Rekey timeout RekeyTimeout - Rekey timeout RejectAfterTime - Reject after time RejectAfterTime - Reject after time KeepaliveTimeout - Keepalive timeout KeepaliveTimeout - Keepalive timeout MaxHandshakeAttempts - Max handshake attempts MaxHandshakeAttempts - Max handshake attempts RandomTrailers RandomTrailers DisableCookies DisableCookies Server settings 服务器设置 Port 端口 Save 保存 Save settings? 保存设置？ Only the settings for this device will be changed 仅更改此设备的设置 Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolAwgSettings AmneziaWG settings AmneziaWG 配置 VPN address subnet VPN 地址子网 Port 端口 Jc - Junk packet count Jc - Junk packet count Jmin - Junk packet minimum size Jmin - Junk packet minimum size Jmax - Junk packet maximum size Jmax - Junk packet maximum size S1 - Init packet junk size S1 - Init packet junk size S2 - Response packet junk size S2 - Response packet junk size S3 - Cookie reply packet junk size S3 - Cookie reply packet junk size S4 - Transport packet junk size S4 - Transport packet junk size H1 - Init packet magic header H1 - Init packet magic header H2 - Response packet magic header H2 - Response packet magic header H3 - Underload packet magic header H3 - Underload packet magic header H4 - Transport packet magic header H4 - Transport packet magic header I1 - Special junk 1 I1 - Special junk 1 I2 - Special junk 2 I2 - Special junk 2 I3 - Special junk 3 I3 - Special junk 3 I4 - Special junk 4 I4 - Special junk 4 I5 - Special junk 5 I5 - Special junk 5 HeaderProtectionKey HeaderProtectionKey ContentPaddingAddition - Content padding addition ContentPaddingAddition - Content padding addition RekeyAfterTime - Rekey after time RekeyAfterTime - Rekey after time RekeyTimeout - Rekey timeout RekeyTimeout - Rekey timeout RejectAfterTime - Reject after time RejectAfterTime - Reject after time KeepaliveTimeout - Keepalive timeout KeepaliveTimeout - Keepalive timeout MaxHandshakeAttempts - Max handshake attempts MaxHandshakeAttempts - Max handshake attempts RandomTrailers RandomTrailers DisableCookies DisableCookies Save 保存 The values of the H1-H4 fields must be unique H1-H4 字段的值必须唯一 The value of the field S1 + message initiation size (148) must not equal S2 + message response size (92) + S3 + cookie reply size (64) + S4 + transport packet size (32) 字段 S1 + 消息发起大小 (148) 的值不得等于 S2 + 消息响应大小 (92) + S3 + Cookie 回复大小 (64) + S4 + 传输包大小 (32) Save settings? 保存设置？ All users with whom you shared a connection with will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolOpenVpnSettings OpenVPN Settings OpenVPN 设置 VPN address subnet VPN 地址子网 Network protocol 网络协议 Port 端口 Auto-negotiate encryption 自定义加密方式 Hash Hash SHA512 SHA512 SHA384 SHA384 SHA256 SHA256 SHA3-512 SHA3-512 SHA3-384 SHA3-384 SHA3-256 SHA3-256 whirlpool whirlpool BLAKE2b512 BLAKE2b512 BLAKE2s256 BLAKE2s256 SHA1 SHA1 Cipher 加密算法 AES-256-GCM AES-256-GCM AES-192-GCM AES-192-GCM AES-128-GCM AES-128-GCM AES-256-CBC AES-256-CBC AES-192-CBC AES-192-CBC AES-128-CBC AES-128-CBC ChaCha20-Poly1305 ChaCha20-Poly1305 ARIA-256-CBC ARIA-256-CBC CAMELLIA-256-CBC CAMELLIA-256-CBC none 无 TLS auth TLS认证 Block DNS requests outside of VPN 阻止VPN外的DNS请求 Additional client configuration commands 附加客户端配置命令 Commands: 命令: Additional server configuration commands 附加服务器端配置命令 Save 保存 Save settings? 保存设置？ All users with whom you shared a connection with will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolRaw settings 配置 Show connection options 显示连接选项 Connection options %1 %1 连接选项 Remove 移除 Remove %1 from server? 从服务器移除 %1 ? All users with whom you shared a connection with will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Continue 继续 Cancel 取消 PageProtocolWireGuardClientSettings WG settings WG 设置 MTU MTU Server settings 服务器设置 Port 端口 Save 保存 Save settings? 保存设置？ Only the settings for this device will be changed 仅更改此设备的设置 Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolWireGuardSettings WG settings WG 设置 VPN address subnet VPN 地址子网 Port 端口 Save 保存 Save settings? 保存设置？ All users with whom you shared a connection with will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXrayFlowSettings Flow Flow Empty 空 xtls-rprx-vision is available only with the RAW (TCP) transport. xtls-rprx-vision 仅在 RAW (TCP) 传输下可用。 Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXraySecuritySettings Security Security None 无 TLS TLS Reality Reality REALITY is not supported with the mKCP transport. Use None or TLS. mKCP 传输不支持 REALITY。请使用 None 或 TLS。 ALPN ALPN Fingerprint Fingerprint Server Name (SNI) 服务器名称 (SNI) Enter a valid IP address or domain name 请输入有效的 IP 地址或域名 Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXraySettings Empty 空 You have read-only access to this server. XRay settings cannot be edited. 您对此服务器仅有只读权限，无法编辑 XRay 设置。 XRay VLESS settings XRay VLESS 设置 More about settings 了解更多设置 Port 端口 Transport Transport Security Security Flow Flow Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 Reset settings 重置设置 Settings were reset to defaults. Tap Save to apply them on the server. 设置已恢复为默认值。点按“保存”以在服务器上应用。 Reset settings? 要重置设置吗？ All XRay settings will be restored to defaults. 所有 XRay 设置将恢复为默认值。 Reset 重置 PageProtocolXraySnapshots Save XRay configuration 保存 XRay 配置 JSON files (*.json) JSON 文件 (*.json) Configuration saved 配置已保存 XRay Configurations XRay 配置 Create configuration based on current settings 基于当前设置创建配置 Export settings 导出设置 Import settings 导入设置 In JSON format JSON 格式 Open XRay configuration 打开 XRay 配置 Failed to import configuration 导入配置失败 Configuration imported successfully 配置导入成功 Configurations 配置 No saved configurations yet. Create one from the current settings. 尚无已保存的配置。 可基于当前设置创建一个。 Apply configuration 应用配置 Export configuration 导出配置 Delete configuration 删除配置 Delete configuration? 要删除该配置吗？ This action cannot be undone. 此操作无法撤销。 Delete 删除 Cancel 取消 PageProtocolXrayTransportSettings Transport Transport RAW (TCP) RAW (TCP) XHTTP XHTTP Advanced users 高级用户 mKCP mKCP mKCP Settings mKCP 设置 TTI TTI Transmission time interval (ms). Valid range: 10–100. Transmission time interval (ms). Valid range: 10–100. uplinkCapacity uplinkCapacity Uplink capacity (MB/s). Maximum: 2147483647. Uplink capacity (MB/s). Maximum: 2147483647. downlinkCapacity downlinkCapacity Downlink capacity (MB/s). Maximum: 2147483647. Downlink capacity (MB/s). Maximum: 2147483647. Mode 规则 HTTP Profile HTTP 配置 Host 主机 Enter a valid IP address or domain name 请输入有效的 IP 地址或域名 Path Path Path must start with "/" 路径必须以 "/" 开头 UplinkHTTPMethod UplinkHTTPMethod Disable gRPC Header 禁用 gRPC 标头 noGRPCHeader noGRPCHeader Disable SSE Header 禁用 SSE 标头 noSSEHeader noSSEHeader Session & Sequence 会话与序列 SessionPlacement SessionPlacement SessionKey SessionKey SeqPlacement SeqPlacement SeqKey SeqKey UplinkDataPlacement UplinkDataPlacement UplinkDataKey UplinkDataKey Traffic Shaping 流量整形 UplinkChunkSize UplinkChunkSize Uplink chunk size in bytes. Maximum: 2147483647. 0 = off. Uplink chunk size in bytes. Maximum: 2147483647. 0 = off. scMaxBufferedPosts scMaxBufferedPosts Max buffered POSTs. Range: 0–2147483647. Max buffered POSTs. Range: 0–2147483647. scMaxEachPostBytes scMaxEachPostBytes scStreamUpServerSecs scStreamUpServerSecs scMinPostsIntervalMs scMinPostsIntervalMs Padding and multiplexing 填充与多路复用 xPadding xPadding XMux XMux On 开 Off 关 Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXrayXPaddingBytesSettings xPaddingBytes xPaddingBytes Range 范围 Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXrayXPaddingSettings xPadding xPadding xPaddingBytes xPaddingBytes xPaddingObfsMode xPaddingObfsMode xPaddingKey xPaddingKey xPaddingHeader xPaddingHeader xPaddingPlacement xPaddingPlacement xPaddingMethod xPaddingMethod Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageProtocolXrayXmuxSettings xmux xmux maxConcurrency maxConcurrency maxConnections maxConnections cMaxReuseTimes cMaxReuseTimes hMaxRequestTimes hMaxRequestTimes hMaxReusableSecs hMaxReusableSecs hKeepAlivePeriod hKeepAlivePeriod HTTP keep-alive period. Integer, may be negative. HTTP keep-alive period. Integer, may be negative. Save 保存 Save settings? 保存设置？ Continue 继续 Cancel 取消 Unable change settings while there is an active connection 存在活动连接时无法更改设置 PageServiceDnsSettings A DNS service is installed on your server, and it is only accessible via VPN. 您的服务器已安装DNS服务，仅能通过VPN访问。 The DNS address is the same as the address of your server. You can configure DNS in the settings, under the connections tab. 其地址与您的服务器地址相同。您可以在 设置 连接 中进行配置。 Remove 移除 Remove %1 from server? 从服务器移除 %1 ? Continue 继续 Cancel 取消 Cannot remove AmneziaDNS from running server 无法从正在运行的服务器移除 AmneziaDNS PageServiceMtProxySettings Checking... 检查中... Updating 更新中 Not deployed 未部署 Running 运行中 Stopped 已停止 Error 错误 Unknown 未知 MTProxy started MTProxy 已启动 MTProxy stopped MTProxy 已停止 Settings locked: connection timed out (error code %1). Re-open the page to retry. 设置已锁定：连接超时（错误代码 %1）。请重新打开页面后重试。 MTProxy settings MTProxy 设置 Read more about this settings 了解更多关于这些设置 No internet connection. Connect to the internet to change MTProxy settings. 无网络连接。请连接互联网以更改 MTProxy 设置。 Connection 连接 Settings 设置 Use Telegram connection link 使用 Telegram 连接链接 Deploy MTProxy first 请先部署 MTProxy Copied 已拷贝 Telegram connection link Telegram 连接链接 MTProxy connection link MTProxy 连接链接 Or enter the proxy details manually. 或手动输入代理信息。 How to do it 操作方法 Host 主机 Port 端口 Secret Secret Delete MTProxy 删除 MTProxy Remove %1 from server? 从服务器移除 %1 ? The proxy will be stopped and all users will lose access. 代理将被停止，所有用户将失去访问权限。 Continue 继续 Cancel 取消 Enable MTProxy 启用 MTProxy Enable MTProxy to edit settings 启用 MTProxy 后才能编辑设置 Cannot reach the server — settings are unavailable 无法连接服务器 — 设置不可用 Base secret Base secret Not generated 未生成 Generate new secret? Generate new secret? All existing connection links will stop working. Users will need new links. 所有现有连接链接将失效，用户需要新的链接。 Generate 生成 New secret saved. It will be applied when MTProxy is started. 新密钥已保存，将在 MTProxy 启动时生效。 Public host / IP 公网主机 / IP Enter a valid IP address or domain name 请输入有效的 IP 地址或域名 Leave empty to use server IP automatically 留空则自动使用服务器 IP ⚠ This overrides the server IP in connection links. Make sure this host/domain points to your server. ⚠ 这会覆盖连接链接中的服务器 IP。请确认该主机/域名指向您的服务器。 Server port 服务器端口 FakeTLS may not work on ports other than 443 FakeTLS 在非 443 端口上可能无法工作 The promoted channel is set in @MTProxyBot. Paste the proxy tag here: exactly 32 hexadecimal characters (0-9, A-F), as in the bot message — or leave empty. 推广频道在 @MTProxyBot 中设置。请将代理标签粘贴到此处：恰好 32 位十六进制字符（0-9、A-F），与机器人消息中一致 — 或留空。 Promoted channel tag (optional) 推广频道标签（可选） 32 hex chars from @MTProxyBot (e.g. 3b7b2fa9…) 来自 @MTProxyBot 的 32 位十六进制字符（例如 3b7b2fa9…） Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F). 代理标签必须为恰好 32 位十六进制字符（0-9、A-F）。 Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F). Leave empty if unused. 代理标签必须为恰好 32 位十六进制字符（0-9、A-F）。不使用时请留空。 Get a tag from 从此处获取标签 Transport mode 传输模式 FakeTLS FakeTLS Standard MTProto Standard MTProto FakeTLS domain FakeTLS domain Enter a valid domain name 请输入有效的域名 The domain is encoded into the FakeTLS client secret (ee + base_secret + hex(domain)). It must support HTTPS / TLS 1.3. 域名会被编码进 FakeTLS 客户端密钥（ee + base_secret + hex(domain)），且必须支持 HTTPS / TLS 1.3。 ⚠ Changing the domain will invalidate all previously issued FakeTLS connection links. ⚠ 更改域名将使此前签发的所有 FakeTLS 连接链接失效。 Advanced 高级 Additional secrets Additional secrets Add extra secrets to allow gradual migration without disconnecting existing users. 添加附加密钥可实现平滑迁移，而不必断开现有用户。 Add additional secret Add additional secret Worker mode Worker mode Auto 自动 Manual 手动 Workers are set to 0 automatically for FakeTLS mode. 在 FakeTLS 模式下，工作进程数会自动设为 0。 Workers count Workers count Server is behind NAT / Docker bridge Server is behind NAT / Docker bridge Enable if your server is not directly accessible from the internet, e.g. Docker or private network 如果您的服务器无法从互联网直接访问（例如 Docker 或专用网络），请启用此项 Internal IP 内网 IP Enter a valid IPv4 address 请输入有效的 IPv4 地址 External IP 外网 IP Diagnostics 诊断 Public port reachable 公网端口可达 — — Yes 是 No 否 Telegram upstream reachable Telegram 上游可达 Clients connected 已连接客户端 Last config refresh 上次配置刷新 Stats endpoint Stats endpoint Refreshing… 刷新中… Tap ↻ to refresh diagnostics 点按 ↻ 刷新诊断 If you change the settings, the proxy connection link will change. The old link will stop working. 如果更改设置，代理连接链接将随之改变，旧链接将失效。 Save 保存 The port must be in the range of 1 to 65535 端口必须在 1 到 65535 之间 Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F), or leave empty. 代理标签必须为恰好 32 位十六进制字符（0-9、A-F），或留空。 NAT internal IP: enter a valid IPv4 address NAT 内网 IP：请输入有效的 IPv4 地址 NAT external IP: enter a valid IPv4 address NAT 外网 IP：请输入有效的 IPv4 地址 PageServiceSftpSettings Settings updated successfully 配置更新成功 SFTP settings SFTP 配置 Host 主机 Copied 拷贝 Port 端口 User name 用户名 Password 密码 Show password 显示密码 Hide password 隐藏密码 Mount folder on device 挂载文件夹 In order to mount remote SFTP folder as local drive, perform following steps: <br> 为将远程 SFTP 文件夹挂载到本地，请执行以下步骤: <br> <br>1. Install the latest version of <br>1. 安装最新版的 <br>2. Install the latest version of <br>2. 安装最新版的 Detailed instructions 详细说明 PageServiceSocksProxySettings Settings updated successfully 配置更新成功 SOCKS5 settings SOCKS5 设置 Host 主机 Copied 已拷贝 Port 端口 User name 用户名 Password 密码 Show password 显示密码 Hide password 隐藏密码 Username 用户名 Change connection settings 更改连接设置 The port must be in the range of 1 to 65535 端口必须在 1 到 65535 之间 Password cannot be empty 密码不能为空 Username cannot be empty 用户名不能为空 PageServiceTProxySettings TProxy started TProxy 已启动 TProxy stopped TProxy 已停止 Settings locked: connection timed out (error code %1). Re-open the page to retry. 设置已锁定：连接超时（错误代码 %1）。请重新打开页面后重试。 TProxy settings TProxy 设置 Read more about Telegram WEB proxy 了解更多关于 Telegram WEB 代理 No internet connection. Connect to the internet to change TProxy settings. 无网络连接。请连接互联网以更改 TProxy 设置。 Connection 连接 Settings 设置 Use Telegram WEB proxy link 使用 Telegram WEB 代理链接 Set a hostname first 请先设置主机名 Copied 已拷贝 Telegram connection link Telegram 连接链接 TProxy WEB proxy link TProxy WEB 代理链接 Or enter the proxy details manually. 或手动输入代理信息。 How to do it 操作方法 Host 主机 Secret Secret Needs a WEB-capable Telegram client (Desktop proof of concept). Classic MTProxy links will not work. 需要支持 WEB 的 Telegram 客户端（桌面端概念验证）。经典 MTProxy 链接无法使用。 Delete TProxy 删除 TProxy Remove %1 from server? 从服务器移除 %1 ? The proxy will be stopped and all users will lose access. 代理将被停止，所有用户将失去访问权限。 Continue 继续 Cancel 取消 Enable TProxy 启用 TProxy Enable TProxy to edit settings 启用 TProxy 后才能编辑设置 Cannot reach the server — settings are unavailable 无法连接服务器 — 设置不可用 Hostname 主机名 proxy.example.com proxy.example.com Use lowercase letters, digits, dots and hyphens 请使用小写字母、数字、点和连字符 Enter a lowercase DNS hostname (A record to this server) 请输入小写的 DNS 主机名（A 记录指向此服务器） Required. Point a DNS A record at this server. Do not put a CDN in front. 必填。请将 DNS A 记录指向此服务器。请勿在其前面放置 CDN。 ACME email ACME 电子邮件 you@example.com you@example.com Enter a valid email for the TLS certificate 请输入用于 TLS 证书的有效电子邮件 Used by Caddy to issue a Let's Encrypt certificate. Caddy 将使用它来签发 Let's Encrypt 证书。 Carrier mode 承载模式 MTProxy workers MTProxy 工作进程数 Save 保存 PageServiceTelemtSettings Checking... 检查中... Updating 更新中 Not deployed 未部署 Running 运行中 Stopped 已停止 Error 错误 Unknown 未知 Telemt started Telemt 已启动 Telemt stopped Telemt 已停止 Settings locked: connection timed out (error code %1). Re-open the page to retry. 设置已锁定：连接超时（错误代码 %1）。请重新打开页面后重试。 Telemt settings Telemt 设置 Read more about this settings 了解更多关于这些设置 No internet connection. Connect to the internet to change Telemt settings. 无网络连接。请连接互联网以更改 Telemt 设置。 Connection 连接 Settings 设置 Use Telegram connection link 使用 Telegram 连接链接 Deploy Telemt first 请先部署 Telemt Copied 已拷贝 Telegram connection link Telegram 连接链接 Telemt connection link Telemt 连接链接 Or enter the proxy details manually. 或手动输入代理信息。 How to do it 操作方法 Host 主机 Port 端口 Secret Secret Delete Telemt 删除 Telemt Remove %1 from server? 从服务器移除 %1 ? The proxy will be stopped and all users will lose access. 代理将被停止，所有用户将失去访问权限。 Continue 继续 Cancel 取消 Enable Telemt 启用 Telemt Enable Telemt to edit settings 启用 Telemt 后才能编辑设置 Cannot reach the server — settings are unavailable 无法连接服务器 — 设置不可用 Base secret Base secret Not generated 未生成 Generate new secret? Generate new secret? All existing connection links will stop working. Users will need new links. 所有现有连接链接将失效，用户需要新的链接。 Generate 生成 New secret saved. It will be applied when Telemt is started. 新密钥已保存，将在 Telemt 启动时生效。 Public host / IP 公网主机 / IP Enter a valid IP address or domain name 请输入有效的 IP 地址或域名 Leave empty to use server IP automatically 留空则自动使用服务器 IP ⚠ This overrides the server IP in connection links. Make sure this host/domain points to your server. ⚠ 这会覆盖连接链接中的服务器 IP。请确认该主机/域名指向您的服务器。 Server port 服务器端口 FakeTLS may not work on ports other than 443 FakeTLS 在非 443 端口上可能无法工作 The promoted channel is set in @MTProxyBot. Paste the proxy tag here: exactly 32 hexadecimal characters (0-9, A-F), as in the bot message — or leave empty. 推广频道在 @MTProxyBot 中设置。请将代理标签粘贴到此处：恰好 32 位十六进制字符（0-9、A-F），与机器人消息中一致 — 或留空。 Promoted channel tag (optional) 推广频道标签（可选） 32 hex chars from @MTProxyBot (e.g. 3b7b2fa9…) 来自 @MTProxyBot 的 32 位十六进制字符（例如 3b7b2fa9…） Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F). 代理标签必须为恰好 32 位十六进制字符（0-9、A-F）。 Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F). Leave empty if unused. 代理标签必须为恰好 32 位十六进制字符（0-9、A-F）。不使用时请留空。 Get a tag from 从此处获取标签 Transport mode 传输模式 FakeTLS FakeTLS Standard MTProto Standard MTProto FakeTLS domain FakeTLS domain Enter a valid domain name 请输入有效的域名 The domain is encoded into the FakeTLS client secret (ee + base_secret + hex(domain)). It must support HTTPS / TLS 1.3. 域名会被编码进 FakeTLS 客户端密钥（ee + base_secret + hex(domain)），且必须支持 HTTPS / TLS 1.3。 ⚠ Changing the domain will invalidate all previously issued FakeTLS connection links. ⚠ 更改域名将使此前签发的所有 FakeTLS 连接链接失效。 Advanced 高级 Additional secrets Additional secrets Add extra secrets to allow gradual migration without disconnecting existing users. 添加附加密钥可实现平滑迁移，而不必断开现有用户。 Add additional secret Add additional secret Set public IP manually 手动设置公网 IP By default the proxy auto-detects its public IP. Enable to override it manually, e.g. when the server is behind NAT / Docker bridge 默认情况下代理会自动检测自身公网 IP。启用后可手动指定，例如服务器位于 NAT 或 Docker 网桥之后时 Public IP 公网 IP Enter a valid IPv4 address 请输入有效的 IPv4 地址 Diagnostics 诊断 Public port reachable 公网端口可达 — — Yes 是 No 否 Telegram upstream reachable Telegram 上游可达 Clients connected 已连接客户端 Last config refresh 上次配置刷新 Stats endpoint Stats endpoint Refreshing… 刷新中… Tap ↻ to refresh diagnostics 点按 ↻ 刷新诊断 If you change the settings, the proxy connection link will change. The old link will stop working. 如果更改设置，代理连接链接将随之改变，旧链接将失效。 Save 保存 The port must be in the range of 1 to 65535 端口必须在 1 到 65535 之间 Proxy tag must be exactly 32 hexadecimal characters (0-9, A-F), or leave empty. 代理标签必须为恰好 32 位十六进制字符（0-9、A-F），或留空。 Public IP: enter a valid IPv4 address 公网 IP：请输入有效的 IPv4 地址 PageServiceTorWebsiteSettings Settings updated successfully 配置更新成功 Tor website settings Tor网站配置 Website address 网址 Copied 已拷贝 Use <a href="https://www.torproject.org/download/" style="color: #FBB26A;">Tor Browser</a> to open this URL. 用 <a href="https://www.torproject.org/download/" style="color: #FBB26A;">Tor 浏览器</a> 打开上面网址. After creating your onion site, it takes a few minutes for the Tor network to make it available for use. 创建您的洋葱网站后，需要几分钟时间，才能使其在Tor网络上可用 When configuring WordPress set the this onion address as domain. 配置 WordPress 时，将此洋葱地址设置为域。 PageSettings Settings 设置 Close application 关闭应用 Servers 服务器 Connection 连接 Application 应用 News & Notifications 新闻与通知 Backup 备份 About AmneziaVPN 关于 Dev console 开发者控制台 PageSettingsAbout You have the latest version of AmneziaVPN 您已使用最新版本的 AmneziaVPN Failed to check for updates 检查更新失败 Support Amnezia 支持Amnezia Amnezia is a free and open-source application. You can support the developers if you like it. Amnezia 是一款免费的开源应用程序。 如果您喜欢的话可以支持开发者。 Contacts 联系方式 Copy version 拷贝版本号 Copied 已拷贝 Check for updates 检查更新 Checking... 检查中... Privacy Policy 隐私政策 Telegram group 电报群 To discuss features 用于功能讨论 https://telegram.me/amnezia_vpn_en https://telegram.me/amnezia_vpn_en support@amnezia.org support@amnezia.org For reviews and bug reports 用于评论和提交软件的缺陷 mailto:support@amnezia.org mailto:support@amnezia.org GitHub GitHub Discover the source code 查看源代码 https://github.com/amnezia-vpn/amnezia-client https://github.com/amnezia-vpn/amnezia-client Website 官网 Visit official website 访问官方网站 PageSettingsApiAvailableCountries Show 显示 Subscription expired 订阅已过期 Subscription expiring soon 订阅即将到期 Renew subscription 续订 Unable change server location while trying to make an active connection 正在尝试建立连接时无法更改服务器位置 Unable change server location while there is an active connection 存在活动连接时无法更改服务器位置 PageSettingsApiDevices Active Devices 活动设备 Manage currently connected devices 管理当前已连接的设备 You can find the identifier on the Support tab or, for older versions of the app, by tapping '+' and then the three dots at the top of the page. 您可以在“支持”选项卡中找到该标识符；在较旧版本的应用中，可点按“+”，然后点按页面顶部的三个点。 (current device) （当前设备） Support tag: 支持标签： Last updated: 上次更新： Cannot unlink device during active connection 存在活动连接时无法解绑设备 Are you sure you want to unlink this device? 确定要解绑此设备吗？ This will unlink the device from your subscription. You can reconnect it anytime by pressing "Reload API config" in subscription settings on device. 此操作会将该设备从您的订阅中解绑。您可以随时在设备的订阅设置中点按“重新加载 API 配置”重新连接。 Continue 继续 Cancel 取消 PageSettingsApiInstructions Windows Windows documentation/instructions/connect-amnezia-premium#windows documentation/instructions/connect-amnezia-premium#windows macOS macOS documentation/instructions/connect-amnezia-premium#macos documentation/instructions/connect-amnezia-premium#macos Android Android documentation/instructions/connect-amnezia-premium#android documentation/instructions/connect-amnezia-premium#android AndroidTV AndroidTV documentation/instructions/android_tv_connect/ documentation/instructions/android_tv_connect/ iOS iOS documentation/instructions/connect-amnezia-premium#ios documentation/instructions/connect-amnezia-premium#ios Linux Linux documentation/instructions/connect-amnezia-premium#linux documentation/instructions/connect-amnezia-premium#linux Routers 路由器 documentation/instructions/connect-amnezia-premium#routers documentation/instructions/connect-amnezia-premium#routers How to connect on another device 如何在其他设备上连接 Setup guides on the Amnezia website Amnezia 网站上的设置指南 PageSettingsApiNativeConfigs Save AmneziaVPN config 保存配置 For router setup or the AmneziaWG app 用于路由器设置或 AmneziaWG 应用 Show 显示 configuration file 配置文件 Generate a new configuration file 生成新的配置文件 The previously created one will stop working 先前创建的将失效 Revoke the current configuration file 吊销当前配置文件 Config file saved 配置文件已保存 The config has been revoked 该配置已被吊销 Generate a new %1 configuration file? 要生成新的 %1 配置文件吗？ Revoke the current %1 configuration file? 要吊销当前的 %1 配置文件吗？ Your previous configuration file will no longer work, and it will not be possible to connect using it 您之前的配置文件将不再有效，也无法用它连接 Download 下载 Continue 继续 Cancel 取消 PageSettingsApiServerInfo Subscription Status 订阅状态 Valid Until 有效期至 Active Connections 活动连接 Subscription expired 订阅已过期 Subscription expiring soon 订阅即将到期 Renew subscription 续订 Configurations have been updated for some countries. Download and install the updated configuration files 部分国家/地区的配置已更新。请下载并安装更新后的配置文件 Subscription Key 订阅密钥 For connecting on other devices 用于在其他设备上连接 Configuration Files 配置文件 Manage configuration files 管理配置文件 Active Devices 活动设备 Manage currently connected devices 管理当前已连接的设备 Support 支持 How to connect on another device 如何在其他设备上连接 Reload API config 重新加载 API 配置 Reload API config? 要重新加载 API 配置吗？ Continue 继续 Cancel 取消 Cannot reload API config during active connection 存在活动连接时无法重新加载 API 配置 Unlink this device 解绑此设备 Are you sure you want to unlink this device? 确定要解绑此设备吗？ This will unlink the device from your subscription. You can reconnect it anytime by pressing "Reload API config" in subscription settings on device. 此操作会将该设备从您的订阅中解绑。您可以随时在设备的订阅设置中点按“重新加载 API 配置”重新连接。 Cannot unlink device during active connection 存在活动连接时无法解绑设备 Remove from application 从应用中移除 Remove from application? 要从应用中移除吗？ Cannot remove server during active connection 存在活动连接时无法移除服务器 PageSettingsApiSubscriptionKey Copy key 复制密钥 Copied 已拷贝 Save key as a file 将密钥保存为文件 Save AmneziaVPN config 保存配置 Config files (*.vpn) 配置文件 (*.vpn) Config file saved 配置文件已保存 Show key text 显示密钥文本 To read the QR code in the Amnezia app, tap + in the main menu → 'QR code' 要在 Amnezia 应用中读取二维码，请在主菜单中点按 + → “二维码” PageSettingsApiSupport Telegram Telegram Email 电子邮件 Email Billing & Orders 账单与订单邮箱 Website 官网 Support 支持 Our technical support specialists are available to assist you at any time 我们的技术支持专家随时为您提供帮助 Support tag 支持标签 Copied 已拷贝 PageSettingsAppSplitTunneling Cannot change split tunneling settings during active connection 无法在活动连接期间更改分割隧道设置 Only the apps from the list should have access via VPN 仅列表中的应用可通过 VPN 访问 Apps from the list should not have access via VPN 列表中的应用不应通过 VPN 访问 App split tunneling 应用分流 Mode 规则 Only "Apps from the list should not have access via VPN" mode is available on Windows 在 Windows 上仅提供“列表中的应用不应通过 VPN 访问”模式 Remove 移除 Continue 继续 Cancel 取消 application name 应用名称 Open executable file 打开可执行文件 Executable files (*.*) 可执行文件 (*.*) PageSettingsApplication Application 应用 Allow application screenshots 允许截屏 Enable notifications 启用通知 Enable notifications to show the VPN state in the status bar 启用通知以在状态栏中显示 VPN 状态 Auto start 自动运行 Launch the application every time the device is starts 每次设备启动时启动应用程序 Auto connect 自动连接 Connect to VPN on app start 应用开启时连接VPN Start minimized 最小化 Launch application minimized (works with autostart option turned on) 以最小化方式启动应用（需开启自动启动） News Notification 新闻通知 Show a notification icon for unread news 为未读新闻显示通知图标 Check for updates automatically 自动检查更新 Check for a new app version at startup 启动时检查应用的新版本 Language 语言 Logging 日志 Enabled 开启 Disabled 禁用 Reset settings and remove all data from the application 重置并清理应用的所有数据 Reset settings and remove all data from the application? 重置并清理应用的所有数据？ All settings will be reset to default. All installed AmneziaVPN services will still remain on the server. 所有配置恢复为默认值。服务器已安装的AmneziaVPN服务将被保留。 Continue 继续 Cancel 取消 Cannot reset settings during active connection 存在活动连接时无法重置设置 PageSettingsBackup Settings restored from backup file 从备份文件还原配置 Back up your configuration 备份您的配置 You can save your settings to a backup file to restore them the next time you install the application. 您可以将配置信息备份到文件中，以便在下次安装应用软件时恢复配置 The backup will contain your passwords and private keys for all servers added to AmneziaVPN. Keep this information in a secure place. 备份将包含您添加到 AmneziaVPN 的所有服务器的密码和私钥。请将这些信息保存在安全的地方。 Make a backup 进行备份 Save backup file 保存备份 Backup files (*.backup) 备份文件 (*.backup) Backup file saved 备份文件已保存 Restore from backup 从备份还原 Open backup file 打开备份文件 Import settings from a backup file? 从备份文件导入设置？ All current settings will be reset 当前所有设置将重置 Continue 继续 Cancel 取消 Cannot restore backup settings during active connection 存在活动连接时无法从备份恢复设置 PageSettingsConnection Connection 连接 Use AmneziaDNS 使用AmneziaDNS If AmneziaDNS is installed on the server 如果已在服务器安装AmneziaDNS DNS servers DNS服务器 When AmneziaDNS is not used or installed 当未使用或未安装AmneziaDNS时 Site-based split tunneling 基于网站的隧道分离 Allows you to select which sites you want to access through the VPN 配置想要通过VPN访问网站 App-based split tunneling 基于应用的隧道分离 Allows you to use the VPN only for certain Apps 只允许在某些应用程序中使用 VPN KillSwitch KillSwitch Blocks network connections without VPN 阻止未经 VPN 的网络连接 PageSettingsDns Default server does not support custom DNS 默认服务器不支持自定义 DNS DNS servers DNS服务器 If AmneziaDNS is not used or installed 如果未使用或未安装AmneziaDNS Primary DNS 首选 DNS Secondary DNS 备用 DNS Restore default 恢复默认配置 Restore default DNS settings? 是否恢复默认DNS配置？ Continue 继续 Cancel 取消 Settings have been reset 已重置 Save 保存 Primary DNS cannot be empty 主 DNS 不能为空 Settings saved 配置已保存 PageSettingsKillSwitch KillSwitch KillSwitch Enable to ensure network traffic goes through a secure VPN tunnel, preventing accidental exposure of your IP and DNS queries if the connection drops 启用后可确保网络流量通过安全的 VPN 隧道，避免连接中断时意外暴露您的 IP 和 DNS 查询 KillSwitch settings cannot be changed during an active connection 存在活动连接时无法更改 KillSwitch 设置 Soft KillSwitch Soft KillSwitch Internet access is blocked if the VPN disconnects unexpectedly 若 VPN 意外断开，将阻止互联网访问 Strict KillSwitch Strict KillSwitch Internet connection is blocked even when VPN is turned off manually or hasn't started 即使手动关闭 VPN 或 VPN 尚未启动，互联网连接也会被阻止 Just a little heads-up 温馨提示 If the VPN disconnects or drops while Strict KillSwitch is enabled, internet access will be blocked. To restore access, reconnect VPN or disable/change the KillSwitch. 若在启用严格 KillSwitch 期间 VPN 断开或掉线，互联网访问将被阻止。要恢复访问，请重新连接 VPN，或禁用/更改 KillSwitch。 Continue 继续 Cancel 取消 DNS Exceptions DNS 例外 DNS servers listed here will remain accessible when KillSwitch is active. KillSwitch 处于活动状态时，此处列出的 DNS 服务器仍可访问。 PageSettingsKillSwitchExceptions DNS Exceptions DNS 例外 DNS servers listed here will remain accessible when KillSwitch is active KillSwitch 处于活动状态时，此处列出的 DNS 服务器仍可访问 Delete 删除 Continue 继续 Cancel 取消 IPv4 address IPv4 地址 Import / Export addresses 导入 / 导出地址 Import 导入 Save address list 保存地址列表 Save addresses 保存地址 Address files (*.json) 地址文件 (*.json) Back 返回 Import address list 导入地址列表 Replace address list 替换地址列表 Open address file 打开地址文件 Add imported addresses to existing ones 将导入的地址追加到现有地址 PageSettingsLogViewer Save 保存 Logs files (*.log) 日志文件 (*.log) Logs file saved 日志文件已保存 Copied 已拷贝 Application 应用 PageSettingsLogging Logging 日志 Application 应用 Logs have been cleaned up 日志已清理 Save 保存 Logs file saved 日志文件已保存 PageSettingsNewsNotifications News & Notifications 新闻与通知 PageSettingsServerData All installed containers have been added to the application 所有已安装的容器，已被添加到应用软件 No new installed containers found 未发现新安装的容器 Check the server for previously installed Amnezia services 检查服务器上，是否存在之前安装的 Amnezia 服务 Add them to the application if they were not displayed 如果存在且未显示，则添加到应用软件 Reboot server 重新启动服务器 Do you want to reboot the server? 您想重新启动服务器吗？ The reboot process may take approximately 30 seconds. Are you sure you wish to proceed? 重新启动过程可能需要大约30秒。您确定要继续吗？ Continue 继续 Cancel 取消 Cannot reboot server during active connection 存在活动连接时无法重启服务器 Remove server from application 移除本地服务器信息 Do you want to remove the server from application? 您想要从应用程序中移除服务器吗？ All installed AmneziaVPN services will still remain on the server. 所有已安装的 AmneziaVPN 服务仍将保留在服务器上。 Cannot remove server during active connection 存在活动连接时无法移除服务器 Clear server from Amnezia software 清理Amnezia中服务器信息 Do you want to clear server from Amnezia software? 您要清除服务器上的Amnezia软件吗？ All users whom you shared a connection with will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Cannot clear server from Amnezia software during active connection 存在活动连接时无法从服务器清除 Amnezia 软件 Reset API config 重置 API 配置 Do you want to reset API config? 您想重置 API 配置吗？ Cannot reset API config during active connection 存在活动连接时无法重置 API 配置 PageSettingsServerInfo Protocols 协议 Services 服务 Management 管理 PageSettingsServerProtocol settings 配置 This protocol is no longer supported. 此协议已不再受支持。 AmneziaWG 2.0 is outdated and does not include the latest security improvements, but it will continue to work. Moving to AmneziaWG 3.1 by deploying a new container on the server is recommended for stronger protocol security AmneziaWG 2.0 已过时，不包含最新的安全改进，但仍可继续使用。为获得更强的协议安全性，建议在服务器上部署新容器以迁移到 AmneziaWG 3.1 connection settings 连接设置 Click the "connect" button to create a connection configuration 点按“连接”按钮以创建连接配置 server settings 服务器设置 Clear profile 清除配置 Clear %1 profile? 要清除 %1 配置吗？ The connection configuration will be deleted for this device only 连接配置将仅针对此设备删除 Continue 继续 Cancel 取消 Unable to clear %1 profile while there is an active connection 存在活动连接时无法清除 %1 配置 Remove 移除 Remove %1 from server? 从服务器移除 %1 ? All users with whom you shared a connection will no longer be able to connect to it. 与您共享连接的所有用户将无法再连接到该连接。 Cannot remove active container 无法移除处于活动状态的容器 PageSettingsServersList Servers 服务器 PageSettingsSplitTunneling Cannot change split tunneling settings during active connection 无法在活动连接期间更改分割隧道设置 Default server does not support split tunneling function 默认服务器不支持分离隧道功能 Only the sites listed here will be accessed through the VPN 只有这里列出的网站将通过VPN访问 Addresses from the list should not be accessed via VPN 不使用VPN访问 Split tunneling 隧道分离 Mode 规则 Remove 移除 Continue 继续 Cancel 取消 website or IP 网站或IP Additional options 其他选项 Import 导入 Save site list 保存网址 Save sites 保存网址 Sites files (*.json) 站点文件 (*.json) Clear site list 清空站点列表 Clear site list? 要清空站点列表吗？ All sites will be removed from list. 所有站点都将从列表中移除。 Back 返回 Import a list of sites 导入网址列表 Replace site list 替换网址列表 Open sites file 打开网址文件 Add imported sites to existing ones 将导入的网址添加到现有网址中 PageSetupWizardApiFreeInfo Free features 免费功能 Continue 继续 PageSetupWizardApiPremiumInfo Try free for %n day(s) 免费试用 %n 天 Recommended 推荐 Change plan 更换套餐 Premium features Premium 功能 Charged to your Apple ID at confirmation. Renews automatically unless auto-renew is turned off at least 24 hours before period end. Manage in Apple ID settings. 确认时将从您的 Apple ID 扣费。除非在周期结束前至少 24 小时关闭自动续订，否则将自动续订。可在 Apple ID 设置中管理。 Continue 继续 Start %n-day free trial 开始 %n 天免费试用 Subscribe — %1 for %2 订阅 — %2 %1 Upgrade plan? 要升级套餐吗？ The current plan will be replaced with the %1 / %2 plan. The change will take effect immediately after confirmation 当前套餐将被替换为 %1 / %2 套餐。确认后更改立即生效 Downgrade plan? 要降级套餐吗？ The current plan will be replaced with the %1 / %2 plan. The store will apply the change based on its billing rules 当前套餐将被替换为 %1 / %2 套餐。商店将按其计费规则应用此更改 Confirm subscription change? 确认更改订阅吗？ An active subscription already exists. The current plan will be replaced with the %1 / %2 plan 已存在有效订阅。当前套餐将被替换为 %1 / %2 套餐 Cancel 取消 %n day(s) free, then %1/%2. Auto-renews until canceled. Cancel anytime in Settings. %n 天免费，之后 %1/%2。在取消前将自动续订。可随时在设置中取消。 %1/%2, auto-renewal. Cancel anytime in the Settings. %1/%2，自动续订。可随时在设置中取消。 PageSetupWizardApiServicesList VPN by Amnezia Amnezia 提供的 VPN Choose a VPN service that suits your needs. 选择适合您需求的 VPN 服务。 Recommended 推荐 PageSetupWizardApiTrialEmail Create an account 创建账户 To manage your subscription 管理您的订阅 Email 电子邮件 We will create an account for your trial subscription and send important subscription updates to this email address 我们将为您的试用订阅创建账户，并将重要的订阅更新发送到此电子邮件地址 Continue 继续 Enter a valid email address 请输入有效的电子邮件地址 PageSetupWizardConfigSource Connection 连接 Settings 设置 Enable logs 启用日志 Export client logs 导出客户端日志 Save 保存 Logs files (*.log) 日志文件 (*.log) Logs file saved 日志文件已保存 Support tag 支持标签 Copied 已拷贝 Insert the key, add a configuration file or scan the QR-code 插入密钥、添加配置文件或扫描二维码 Insert key 插入密钥 Insert 插入 Continue 继续 Other connection options 其他连接方式 Recommended 推荐 Site Amnezia Amnezia 网站 VPN by Amnezia Amnezia 提供的 VPN The easiest way to connect to the VPN 连接 VPN 最简单的方式 Self-hosted VPN 自建 VPN Configure Amnezia VPN on your own server 在您自己的服务器上配置 Amnezia VPN Restore from backup 从备份还原 Open backup file 打开备份文件 Backup files (*.backup) 备份文件 (*.backup) File with connection settings 包含连接配置的文件 Open config file 打开配置文件 QR code 二维码 Restore purchases 恢复购买 I have nothing 我没有 PageSetupWizardCredentials Configure your server 配置服务器 Password or SSH private key 密码或 SSH 私钥 SSH key requirements: supported key types are ED25519 and RSA in PEM format. Paste the private key, including the BEGIN/END lines. If your key doesn’t work, generate a compatible one SSH 密钥要求：支持的密钥类型为 PEM 格式的 ED25519 和 RSA。请粘贴私钥，包含 BEGIN/END 行。如果您的密钥不可用，请生成一个兼容的密钥 Continue 继续 All data you enter will remain strictly confidential and will not be shared or disclosed to the Amnezia or any third parties 您输入的所有数据将严格保密，不会与 Amnezia 或任何第三方共享或披露 Don't have a server? 还没有服务器？ Amnezia hosting. VPN servers without complicated settings and headaches Amnezia 托管服务。无需复杂设置、省心的 VPN 服务器 How to run your VPN server 如何运行您自己的 VPN 服务器 Where to get connection data, step-by-step instructions for buying a VPS 在哪里获取连接数据，以及购买 VPS 的分步说明 Ip address cannot be empty IP不能为空 Enter the address in the format 255.255.255.255:88 按照这种格式输入 255.255.255.255:88 Login cannot be empty 账号不能为空 Password/private key cannot be empty 密码或私钥不能为空 You'll need server credentials. Enter the server IP and password 你需要服务器凭据。请输入服务器 IP 和密码 Server IP address [:port] 服务器IP [:端口] 255.255.255.255:22 255.255.255.255:22 SSH Username SSH 用户名 PageSetupWizardEasy Choose Installation Type 选择安装类型 Manual 手动 Choose a VPN protocol 选择 VPN 协议 Continue 继续 Skip setup 跳过设置 PageSetupWizardInstalling Usually it takes no more than 5 minutes 通常不超过5分钟 The server has already been added to the application 服务器已添加到应用软件中 Amnezia has detected that your server is currently Amnezia 检测到您的服务器当前 busy installing other software. Amnezia installation 正安装其他软件。Amnezia安装 will pause until the server finishes installing other software 将暂停，直到其他软件安装完成。 Installing 安装中 Cancel installation 取消安装 PageSetupWizardProtocolSettings Installing %1 正在安装 %1 More detailed 更多细节 Back 返回 Close 关闭 Network protocol 网络协议 Port 端口 Hostname 主机名 proxy.example.com proxy.example.com Use lowercase letters, digits, dots and hyphens 请使用小写字母、数字、点和连字符 ACME email ACME 电子邮件 you@example.com you@example.com Enter a valid email for the TLS certificate 请输入用于 TLS 证书的有效电子邮件 Needs a DNS A record and free, internet-reachable ports 443 (HTTPS) and 80 (ACME). If either port is busy or blocked, the proxy will not work. Classic Telegram MTProxy links will not work. 需要一条 DNS A 记录，以及可从互联网访问的空闲端口 443（HTTPS）和 80（ACME）。若其中任一端口被占用或被封锁，代理将无法工作。经典 Telegram MTProxy 链接无法使用。 Install 安装 Enter a lowercase DNS hostname 请输入小写的 DNS 主机名 The port must be in the range of 1 to 65535 端口必须在 1 到 65535 之间 PageSetupWizardProtocols VPN protocol VPN 协议 Choose the one with the highest priority for you. Later, you can install other protocols and additional services, such as DNS proxy and SFTP. 选择你认为优先级最高的一项。稍后，您可以安装其他协议和附加服务，例如 DNS 代理和 SFTP。 PageSetupWizardQrReader Point the camera at the QR code and hold for a couple of seconds. 将相机对准二维码并按住几秒钟 PageSetupWizardStart Let's get started 开始吧 PageSetupWizardTextKey Connection key 连接授权码 A line that starts with vpn://... 以 vpn://... 开始的行 Key 授权码 Insert 插入 Continue 继续 PageSetupWizardViewConfig New connection 新连接 Collapse content 折叠内容 Show content 显示内容 Enable WireGuard obfuscation. It may be useful if WireGuard is blocked on your provider. 启用 WireGuard 混淆。若您的网络提供商封锁了 WireGuard，此项可能有用。 Use connection codes only from sources you trust. Codes from public sources may have been created to intercept your data. 只使用您信任的来源提供的连接代码。公共来源的代码可能是为了拦截您的数据而创建的。 Connect 连接 PageShare Config revoked 配置已撤销 Save AmneziaVPN config 保存配置 Save OpenVPN config 保存OpenVPN配置 Save WireGuard config 保存WireGuard配置 Save AmneziaWG config 保存 AmneziaWG 配置 Save XRay config 保存 XRay 配置 Connection to 连接到 File with connection settings to 连接配置文件的内容为: For the AmneziaVPN app AmneziaVPN 应用 OpenVPN native format OpenVPN原生格式 WireGuard native format WireGuard原生格式 AmneziaWG native format AmneziaWG 本地格式 XRay native format XRay 原生格式 Share VPN Access 共享 VPN 访问 Share full access to the server and VPN 共享服务器和VPN的完全访问权限 Use for your own devices, or share with those you trust to manage the server. 用于您自己的设备，或与您信任的人共享以管理服务器. Share 共享 Connection 连接 Users 用户 Share VPN access without the ability to manage the server 共享 VPN 访问，无需管理服务器 User name 用户名 Server 服务器 Protocol 协议 Connection format 连接格式 Creation date: %1 创建日期：%1 Latest handshake: %1 最近握手：%1 Data received: %1 已接收数据：%1 Data sent: %1 已发送数据：%1 Allowed IPs: %1 允许的 IP：%1 Rename 重新命名 Client name 客户名称 Save 保存 Revoke 撤销 Revoke the config for a user - %1? 撤销用户的配置- %1? The user will no longer be able to connect to your server. 该用户将无法再连接到您的服务器. Continue 继续 Cancel 取消 PageShareConnection Share 共享 Copy 拷贝 Save AmneziaVPN config 保存配置 Copy config string 复制配置字符串 Show connection settings 显示连接配置 Copied 已拷贝 To read the QR code in the Amnezia app, tap + in the main menu → 'QR code' 要在 Amnezia 应用中读取二维码，请在主菜单中点按 + → “二维码” This config is too large for a QR code. Share the file or copy the connection settings instead. 此配置过大，无法生成二维码。请改为共享文件或复制连接设置。 PageShareFullAccess Full access to the server and VPN 对服务器和VPN的完全访问权限 We recommend that you use full access to the server only for your own additional devices. 我们建议您仅为自己的附加设备使用服务器的完全访问权限. If you share full access with other people, they can remove and add protocols and services to the server, which will cause the VPN to work incorrectly for all users. 如果您与其他人共享完全访问权限，他们可以从服务器中删除和添加协议和服务，这将导致VPN对所有用户的工作出现问题。 Server 服务器 Accessing 访问 File with accessing settings to 访问配置文件的内容为 Share 共享 Access error! 访问错误 PageStart Logging was disabled after 14 days, log files were deleted 日志记录已在 14 天后停用，日志文件已删除 Settings restored from backup file 从备份文件还原配置 Logging is enabled. Note that logs will be automaticallydisabled after 14 days, and all log files will be deleted. 日志记录已启用。请注意，14 天后将自动停用，且所有日志文件都会被删除。 Home 首页 Share 共享 Settings 设置 Add 添加 PageUpdate Done. Install the update 已完成。请安装更新 Download failed. Download manually from amnezia.org 下载失败。请从 amnezia.org 手动下载 New version available 有新版本可用 New 新增 Improved 改进 Fixed 修复 Update app 更新应用 Downloading update... 正在下载更新... Install update 安装更新 Retry 重试 QObject SFTP service SFTP 服务 SOCKS5 proxy server SOCKS5 代理服务器 TProxy (Telegram WEB) TProxy (Telegram WEB) (version 3.1) （版本 3.1） (version 2) （版本 2） (version 1.5) （版本 1.5） No error 没有错误 Unknown error 未知错误 Function not implemented 功能未实现 Background service is not running 后台服务未运行 The selected protocol is not supported on the current platform 当前平台不支持所选协议 Server check failed 服务器检测失败 Server port already used. Check for another software 检测服务器该端口是否被其他软件被占用 Server error: Docker container missing 服务器错误: Docker容器丢失 Server error: Docker failed 服务器错误: Docker失败 Installation canceled by user 用户取消安装 The user is not a member of the sudo group 用户不是 sudo 组的成员 Server error: Package manager error 服务器错误：包管理器错误 The sudo package is not pre-installed on the server 服务器上未预装 sudo 软件包 The server user's home directory is not accessible 无法访问服务器用户的主目录 Action not allowed in sudoers sudoers 中不允许此操作 The user's password is required 需要用户密码 Docker error: runc doesn't work on cgroups v2 Docker 错误：runc 无法在 cgroups v2 上运行 Server error: cgroup mountpoint does not exist 服务器错误：cgroup 挂载点不存在 Docker error: The pull rate limit has been reached Docker 错误：已达到拉取速率限制 Server error: Linux kernel is too old 服务器错误：Linux 内核版本过旧 Server error: invalid or unreadable XRay server configuration 服务器错误：XRay 服务器配置无效或无法读取 Server error: XRay server has no VLESS clients 服务器错误：XRay 服务器没有 VLESS 客户端 Server error: failed to read XRay Reality keys from the server 服务器错误：无法从服务器读取 XRay Reality 密钥 Server error: The default container runtime available for installation on this server is not supported. Install Docker Engine on the server manually and try again. 服务器错误：此服务器上可安装的默认容器运行时不受支持。 请在服务器上手动安装 Docker Engine 后重试。 Container runtime error: The container runtime service is not running. Check the container runtime service on the server, or wait about a minute and try again. 容器运行时错误：容器运行时服务未运行。 请检查服务器上的容器运行时服务，或等待约一分钟后重试。 SSH request was denied SSH请求被拒绝 SSH request was interrupted SSH请求中断 SSH internal error SSH内部错误 Invalid private key or invalid passphrase entered 输入的私钥或密码无效 The selected private key format is not supported, use openssh ED25519 key types or PEM key types 不支持所选私钥格式，请使用 openssh ED25519 密钥类型或 PEM 密钥类型 Timeout connecting to server 连接服务器超时 SCP error: Generic failure SCP 错误：一般性失败 Backup files cannot be imported here. Use 'Restore from backup' instead. 无法在此处导入备份文件。请改用"从备份恢复"。 Backup file is corrupted or has invalid format 备份文件已损坏或格式无效 This legacy Amnezia subscription format is no longer supported 此旧版 Amnezia 订阅格式已不再受支持 This configuration was created in a newer version of the application and is not fully supported. Please update the application 此配置由更新版本的应用创建，当前版本无法完全支持。请更新应用 Some configurations from the backup were not restored because they require a newer version of the application 备份中的部分配置未能恢复，因为它们需要更新版本的应用 This protocol is no longer supported. Please select another protocol or remove this container from the server settings. 此协议已不再受支持。请选择其他协议，或从服务器设置中移除此容器。 Unable to open config file 无法打开配置文件 VPN Protocols is not installed. Please install VPN container at first VPN 协议尚未安装。 请先安装 VPN 容器 VPN connection error VPN 连接错误 Error when retrieving configuration from API 从 API 检索配置时出错 This config has already been added to the application 该配置已添加到应用程序中 In the response from the server, an empty config was received 服务器返回的响应中收到了空配置 SSL error occurred 发生 SSL 错误 Server response timeout on api request API 请求的服务器响应超时 Missing AGW public key 缺少 AGW 公钥 Failed to decrypt response payload 解密响应内容失败 Missing list of available services 缺少可用服务列表 The limit of allowed configurations per subscription has been exceeded 已超出每个订阅允许的配置数量上限 Please update the application to use this feature 请更新应用以使用此功能 Your Amnezia Premium subscription has expired. Please check your email for renewal instructions. If you haven't received an email, please contact our support. 您的 Amnezia Premium 订阅已过期。 请查看您的电子邮件以获取续订说明。 如果您未收到邮件，请联系我们的支持团队。 Unable to process purchase 无法处理购买 No active subscription found 未找到有效的订阅 No purchased subscriptions found. Please purchase a subscription first 未找到已购买的订阅。请先购买订阅 This email address has already been used to activate a trial 此电子邮件地址已用于激活试用 CAPTCHA verification is required 需要进行验证码验证 CAPTCHA was incorrect. Please try again 验证码不正确。请重试 CAPTCHA refreshed. Please try again 验证码已刷新。请重试 Too many requests. Please try again later 请求过于频繁。请稍后重试 Your payment is pending confirmation in Google Play. Once the payment is completed, the subscription will be added automatically on the next app launch. 您的付款正在 Google Play 中等待确认。付款完成后，订阅将在下次启动应用时自动添加。 Your payment is awaiting confirmation. Once it is approved, the subscription will be added automatically. 您的付款正在等待确认。通过后，订阅将自动添加。 Your payment is pending confirmation. Please complete the payment and then restore your subscription. 您的付款正在等待确认。请完成付款后再恢复订阅。 No purchases to restore. If you have an active subscription, make sure you're signed in with the same Google account used for the purchase. 没有可恢复的购买记录。如果您有有效订阅，请确认已使用购买时的同一 Google 账号登录。 No purchases to restore. If you have an active subscription, make sure you're signed in with the same Apple ID used for the purchase. 没有可恢复的购买记录。如果您有有效订阅，请确认已使用购买时的同一 Apple ID 登录。 No purchases to restore. If you have an active subscription, make sure you're signed in with the same account used for the purchase. 没有可恢复的购买记录。如果您有有效订阅，请确认已使用购买时的同一账号登录。 QFile error: The file could not be opened QFile 错误：无法打开该文件 QFile error: An error occurred when reading from the file QFile 错误：读取文件时发生错误 QFile error: The file could not be accessed QFile 错误：无法访问该文件 QFile error: An unspecified error occurred QFile 错误：发生未指定的错误 QFile error: A fatal error occurred QFile 错误：发生严重错误 QFile error: The operation was aborted QFile 错误：操作已中止 Transaction was canceled by the user 交易已被用户取消 Billing error 计费错误 Internal Google Play error, please try again later Google Play 内部错误，请稍后重试 Billing is unavailable, please try again later 计费服务不可用，请稍后重试 You already own this subscription 您已拥有此订阅 The requested subscription is not available for purchase 所请求的订阅无法购买 A network error occurred during the operation, please check the Internet connection 操作过程中发生网络错误，请检查网络连接 ErrorCode: %1. 错误代码: %1. OpenVPN config missing OpenVPN配置丢失 OpenVPN management server error OpenVPN 管理服务器错误 OpenVPN executable missing OpenVPN 可执行文件丢失 Amnezia helper service error Amnezia 服务连接失败 OpenSSL failed OpenSSL错误 Can't connect: another VPN connection is active 无法连接：另一个VPN连接处于活跃状态 Can't setup OpenVPN TAP network adapter 无法设置 OpenVPN TAP 网络适配器 VPN pool error: no available addresses VPN 池错误：没有可用地址 The config does not contain any containers and credentials for connecting to the server 配置不包含任何用于连接服务器的容器和凭据 Internal error 内部错误 IPsec IPsec Website in Tor network 在 Tor 网络中架设网站 AmneziaDNS AmneziaDNS SFTP file sharing service SFTP文件共享服务 MTProxy (Telegram) MTProxy (Telegram) Telemt (Telegram) Telemt (Telegram) OpenVPN is the most popular VPN protocol, with flexible configuration options. It uses its own security protocol with SSL/TLS for key exchange. OpenVPN 是最流行的 VPN 协议，具有灵活的配置选项。它使用自己的安全协议与 SSL/TLS 进行密钥交换。 This protocol is no longer supported. 此协议已不再受支持。 Telegram MTProto proxy server. Allows Telegram clients to connect through your server using the MTProto protocol. Supports FakeTLS mode for bypassing DPI-based blocking. Telegram MTProto 代理服务器。允许 Telegram 客户端通过您的服务器使用 MTProto 协议连接。支持 FakeTLS 模式以绕过基于 DPI 的封锁。 Telegram MTProto proxy powered by Telemt (Rust). Supports secure and TLS fronting modes with optional traffic masking. 基于 Telemt (Rust) 的 Telegram MTProto 代理。支持安全模式和 TLS fronting 模式，并可选择进行流量伪装。 Telegram WEB proxy. Clients connect over HTTPS to a hostname; the server relays traffic to official MTProxy. Requires a domain, ports 80 and 443, and a WEB-capable Telegram app. Telegram WEB 代理。客户端通过 HTTPS 连接到主机名，服务器将流量转发到官方 MTProxy。需要一个域名、端口 80 和 443，以及支持 WEB 的 Telegram 应用。 Automatic 自动 AmneziaWG protocol will be installed. It provides high connection speed and ensures stable operation even in the most challenging network conditions. 将安装 AmneziaWG 协议。它提供高连接速度，即使在最恶劣的网络环境下也能稳定运行。 WireGuard - popular VPN protocol with high performance, high speed and low power consumption. WireGuard — 高性能、高速度、低功耗的热门 VPN 协议。 AmneziaWG is a special protocol from Amnezia based on WireGuard. It provides high connection speed and ensures stable operation even in the most challenging network conditions. AmneziaWG 是 Amnezia 基于 WireGuard 开发的专用协议。它提供高连接速度，即使在最恶劣的网络环境下也能稳定运行。 XRay with REALITY masks VPN traffic as web traffic and protects against active probing. It is highly resistant to detection and offers high speed. XRay 配合 REALITY 可将 VPN 流量伪装为网页流量，并防御主动探测。它极难被识别，同时提供很高的速度。 IKEv2/IPsec - Modern stable protocol, a bit faster than others, restores connection after signal loss. It has native support on the latest versions of Android and iOS. IKEv2/IPsec — 现代稳定的协议，速度略快于其他协议，在信号丢失后可恢复连接。最新版本的 Android 和 iOS 均原生支持该协议。 Telegram MTProto proxy server Telegram MTProto 代理服务器 Telegram MTProto proxy (Telemt, Rust) Telegram MTProto 代理 (Telemt, Rust) Telegram WEB proxy (tproxy-server) Telegram WEB 代理 (tproxy-server) OpenVPN is one of the most popular and reliable VPN protocols. It uses SSL/TLS encryption, supports a wide variety of devices and operating systems, and is continuously improved by the community due to its open-source nature. It provides a good balance between speed and security but is easily recognized by DPI systems, making it susceptible to blocking. Features: * Available on all AmneziaVPN platforms * Normal battery consumption on mobile devices * Flexible customization for various devices and OS * Operates over both TCP and UDP protocols OpenVPN 是最流行、最可靠的 VPN 协议之一。它采用 SSL/TLS 加密，支持种类繁多的设备和操作系统，并且由于其开源特性而不断得到社区的改进。它在速度与安全之间取得了良好的平衡，但很容易被 DPI 系统识别，因而容易被封锁。 特性： * 在所有 AmneziaVPN 平台上均可使用 * 移动设备上电量消耗一般 * 可针对各种设备和操作系统灵活定制 * 同时支持 TCP 和 UDP 协议 WireGuard is a modern, streamlined VPN protocol offering stable connectivity and excellent performance across all devices. It uses fixed encryption settings, delivering lower latency and higher data transfer speeds compared to OpenVPN. However, WireGuard is easily identifiable by DPI systems due to its distinctive packet signatures, making it susceptible to blocking. Features: * Available on all AmneziaVPN platforms * Low power consumption on mobile devices * Minimal configuration required * Easily detected by DPI systems (susceptible to blocking) * Operates over UDP protocol WireGuard 是一款现代、精简的 VPN 协议，可在所有设备上提供稳定的连接和出色的性能。它采用固定的加密设置，相比 OpenVPN 延迟更低、数据传输速度更高。不过，由于数据包特征明显，WireGuard 很容易被 DPI 系统识别，因而容易被封锁。 特性： * 在所有 AmneziaVPN 平台上均可使用 * 移动设备上功耗低 * 只需极少配置 * 容易被 DPI 系统检测（容易被封锁） * 通过 UDP 协议运行 AmneziaWG is a modern VPN protocol based on WireGuard, combining simplified architecture with high performance across all devices. It addresses WireGuard's main vulnerability (easy detection by DPI systems) through advanced obfuscation techniques, making VPN traffic indistinguishable from regular internet traffic. AmneziaWG is an excellent choice for those seeking a fast, stealthy VPN connection. Features: * Available on all AmneziaVPN platforms * Low battery consumption on mobile devices * Minimal settings required * Undetectable by traffic analysis systems (DPI) * Operates over UDP protocol AmneziaWG 是基于 WireGuard 的现代 VPN 协议，将简化的架构与所有设备上的高性能结合在一起。它通过先进的混淆技术解决了 WireGuard 的主要弱点（容易被 DPI 系统检测），使 VPN 流量与普通互联网流量无法区分。 对于追求快速、隐蔽的 VPN 连接的用户，AmneziaWG 是极佳的选择。 特性： * 在所有 AmneziaVPN 平台上均可使用 * 移动设备上电量消耗低 * 只需极少设置 * 无法被流量分析系统（DPI）检测 * 通过 UDP 协议运行 REALITY is an innovative protocol developed by the creators of XRay, designed specifically to combat high levels of internet censorship. REALITY identifies censorship systems during the TLS handshake, redirecting suspicious traffic seamlessly to legitimate websites like google.com while providing genuine TLS certificates. This allows VPN traffic to blend indistinguishably with regular web traffic without special configuration. Unlike older protocols such as VMess, VLESS, and XTLS-Vision, REALITY incorporates an advanced built-in "friend-or-foe" detection mechanism, effectively protecting against DPI and other traffic analysis methods. Features: * Resistant to active probing and DPI detection * No special configuration required to disguise traffic * Highly effective in heavily censored regions * Minimal battery consumption on devices * Operates over TCP protocol REALITY 是由 XRay 的开发者打造的创新协议，专门用于对抗高强度的互联网审查。REALITY 在 TLS 握手过程中识别审查系统，并在提供真实 TLS 证书的同时，将可疑流量无缝重定向到 google.com 等真实网站。这使得 VPN 流量无需特殊配置即可与普通网页流量混为一体、难以区分。 与 VMess、VLESS 和 XTLS-Vision 等较早的协议不同，REALITY 内置了先进的"敌我识别"机制，可有效防御 DPI 及其他流量分析手段。 特性： * 可抵御主动探测和 DPI 检测 * 伪装流量无需特殊配置 * 在审查严格的地区效果极佳 * 设备上电量消耗极低 * 通过 TCP 协议运行 IKEv2, combined with IPSec encryption, is a modern and reliable VPN protocol. It reconnects quickly when switching networks or devices, making it ideal for dynamic network environments. While it provides good security and speed, it's easily recognized by DPI systems and susceptible to blocking. Features: * Available in AmneziaVPN only on Windows * Low battery consumption on mobile devices * Minimal configuration required * Detectable by DPI analysis systems(easily blocked) * Operates over UDP protocol(ports 500 and 4500) IKEv2 结合 IPSec 加密，是一种现代且可靠的 VPN 协议。在切换网络或设备时它能快速重新连接，因此非常适合网络环境多变的场景。虽然它提供了良好的安全性和速度，但很容易被 DPI 系统识别，也容易被封锁。 特性： * 在 AmneziaVPN 中仅 Windows 平台可用 * 移动设备上电量消耗低 * 只需极少配置 * 可被 DPI 分析系统检测（容易被封锁） * 通过 UDP 协议运行（端口 500 和 4500） After installation, Amnezia will create a file storage on your server. You will be able to access it using FileZilla or other SFTP clients, as well as mount the disk on your device to access it directly from your device. For more detailed information, you can find it in the support section under "Create SFTP file storage." 安装后，Amnezia 将创建一个 服务器上的文件存储。 您将能够使用它来访问它 FileZilla 或其他 SFTP 客户端，以及将磁盘挂载到您的设备上进行访问 直接从您的设备. 欲了解更详细的信息，您可以 在支持部分找到它 "创建SFTP文件存储." Create a file vault on your server to securely store and transfer files. 在您的服务器上创建一个文件保险库，用于安全存储和传输文件。 Deploy a WordPress site on the Tor network in two clicks. 只需点击两次即可架设 WordPress 网站到 Tor 网络. Replace the current DNS server with your own. This will increase your privacy level. 将当前的 DNS 服务器替换为您自己的。这将提高您的隐私保护级别。 DNS Service DNS 服务 vmess:// url is invalid vmess:// 网址无效 Invalid streamSettings protocol: 无效的 streamSettings 协议： Unknown transport method: 未知的传输方式： VMess string should start with 'vmess://' VMess 字符串应以 'vmess://' 开头 VMess string should be a valid base64 string VMess 字符串应为有效的 base64 字符串 JSON should not be empty JSON 不应为空 VLESS link should start with vless:// VLESS 链接应以 vless:// 开头 link parse failed: %1 链接解析失败：%1 empty host 主机为空 missing port 缺少端口 missing uuid 缺少 uuid Invalid ssd link: json: field %1 must exist 无效的 ssd 链接：json：字段 %1 必须存在 Invalid ssd link: json: field %1 must be valid port number 无效的 ssd 链接：json：字段 %1 必须是有效的端口号 Invalid ssd link: json: field %1 must be of type 'string' 无效的 ssd 链接：json：字段 %1 的类型必须为 'string' Invalid ssd link: json: field %1 must be an array 无效的 ssd 链接：json：字段 %1 必须是数组 Skipping invalid ssd server: server must be an object 跳过无效的 ssd 服务器：服务器必须是一个对象 Skipping invalid ssd server: missing required field %1 跳过无效的 ssd 服务器：缺少必填字段 %1 Skipping invalid ssd server: field %1 should be of type 'string' 跳过无效的 ssd 服务器：字段 %1 的类型应为 'string' Invalid ssd link: should begin with ssd:// 无效的 ssd 链接：应以 ssd:// 开头 Invalid ssd link: base64 parse failed 无效的 ssd 链接：base64 解析失败 Invalid ssd link: json parse failed 无效的 ssd 链接：json 解析失败 Invalid ssd link: rc4-md5 encryption is not supported by v2ray-core 无效的 ssd 链接：v2ray-core 不支持 rc4-md5 加密 SS URI is too short SS URI 过短 Can't find the colon separator between method and password 找不到加密方式与密码之间的冒号分隔符 Can't find the at separator between password and hostname 找不到密码与主机名之间的 @ 分隔符 Can't find the colon separator between hostname and port 找不到主机名与端口之间的冒号分隔符 RadioItemType Available in Premium Premium 可用 RenameServerDrawer Server name 服务器名 Save 保存 SearchFieldType Search 搜索 SecureServersRepository Server 服务器 SelectLanguageDrawer Back 返回 Choose language 选择语言 ServerListItem Server settings 服务器设置 ServersListView Subscription expired. Please renew 订阅已过期，请续订 Subscription expiring soon 订阅即将到期 Unable change server while there is an active connection 已建立连接时无法更改服务器配置 ServersUiController Legacy API v1 configs are no longer supported. Remove this server to continue. 旧版 API v1 配置已不再受支持。请移除此服务器以继续。 Use the remove action to delete this legacy config. 请使用移除操作删除此旧版配置。 ServicesCatalogController %1/mo IAP: price per month in plan subtitle %1/月 from %1 per month IAP: card footer minimum monthly price from StoreKit 每月 %1 起 SettingsUiController All settings have been reset to default values 所配置恢复为默认值 SnackbarType Close 关闭 SubscriptionExpiredDrawer subscription has expired 订阅已过期 Renew to continue using VPN 续订以继续使用 VPN Renew 续订 Support 支持 SubscriptionUiController Your subscription has been upgraded 您的订阅已升级 This subscription has already been added 此订阅已添加 %1 has been added to the app %1 已添加到应用 Subscription restored successfully 订阅已成功恢复 Purchase confirmed. Subscription has been added to the app 购买已确认。订阅已添加到应用 %1 installed successfully. %1 安装成功。 Enter the digits from the image to continue 请输入图片中的数字以继续 This email address has already been used to activate a trial. Like the service? Upgrade to Premium 此电子邮件地址已用于激活试用。喜欢这项服务吗？升级到 Premium API config reloaded API 配置已重新加载 Successfully changed the country of connection to %1 已成功将连接国家/地区更改为 %1 API config removed API 配置已移除 Server '%1' was removed 已移除服务器 '%1' SystemTrayNotificationHandler Show 显示 Connect 连接 Disconnect 断开 Visit Website 官网 Quit 退出 TermsAndPrivacyText By continuing, you agree to the <a href="%1" style="color: %3;">Terms of Use</a> and <a href="%2" style="color: %3;">Privacy Policy</a> 继续即表示您同意<a href="%1" style="color: %3;">使用条款</a>和<a href="%2" style="color: %3;">隐私政策</a> TextFieldType The field can't be empty 输入不能为空 UpdateSupportDrawer Support 支持 If the update won't install, message us 如果更新无法安装，请联系我们 Telegram Telegram We'll reply in chat 我们会在聊天中回复 https://t.me/amnezia_vpn_en https://t.me/amnezia_vpn_en support@amnezia.org support@amnezia.org Support email 支持邮箱 mailto:support@amnezia.org mailto:support@amnezia.org amnezia.org amnezia.org Download the update manually 手动下载更新 VpnConnection Mbps Mbps VpnProtocol Unknown 未知 Disconnected 连接已断开 Preparing 准备中 Connecting... 连接中 Connected 已连接 Disconnecting... 断开中 Reconnecting... 重连中 Error 错误 XrayConfigModel Port must be in the range of 1 to 65535 端口必须在 1 到 65535 之间 SNI: enter a valid IP address or domain name SNI：请输入有效的 IP 地址或域名 Host: enter a valid IP address or domain name 主机：请输入有效的 IP 地址或域名 Path must start with "/" 路径必须以 "/" 开头 XrayConfigSnapshotsModel Invalid JSON format JSON 格式无效 main2 Private key passphrase 私钥密码 Save 保存 This subscription format is no longer supported 此订阅格式已不再受支持 This legacy Amnezia subscription type can no longer be used to connect in this application version. Remove the server from the app to continue. 此旧版 Amnezia 订阅类型已无法在本应用版本中用于连接。 请从应用中移除该服务器以继续。 Continue 继续 Cancel 取消 Cannot remove server during active connection 存在活动连接时无法移除服务器