* data_sources: render RRDtool Tune Info as balanced div boxes
rrdtool_tune() emitted an unbalanced mix of html_header() and
html_end_box() calls wrapped around raw table rows inside the single
box opened by data_sources.php. The premature and extra closing tags
corrupted the DOM, which (depending on theme) clipped the Save button
at the bottom of the Data Source edit page while in Data Source Info
mode.
- Separate the execute, CLI and HTML code paths in rrdtool_tune() and,
for HTML, render each section as a self contained, balanced div box.
- Extract and rename the helper print_leaves() to the standalone
rrdtool_tune_print_leaves(), matching the rrdtool_tune_* naming
convention, and emit div rows instead of table rows.
- Switch the data_sources.php wrapper box to div mode to match.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* data_debug: require POST for the Data Source repair actions
Applying RRDfile repairs and rerunning the debugger are state changing
operations, so they should not be reachable with a GET. Driving them
through a GET also meant the follow up redirect was pulled into the
content area as a full page, losing the theme and navigation on
rerender.
Register data_debug.php run_repair and run_debug in the
cactiIsPostActionUrl() allowlist so loadUrl() upgrades them to a
token-bearing POST, and add the matching csrf_require_post() guard so
the browser transport and server side guard stay in sync.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* rrd: split rrdtool_tune into testable render and execute helpers
Break rrdtool_tune() into small single-purpose helpers so each path can
be exercised directly by unit tests (the web display path is otherwise
unreachable under CACTI_CLI):
- rrdtool_tune_print_leaves() takes an explicit $html flag instead of
branching on CACTI_CLI, so both the div and plain-text branches are
testable.
- rrdtool_tune_execute() applies the tune/resize commands for a repair.
- rrdtool_tune_print_cli() prints the source commands as plain text.
- rrdtool_tune_print_html() renders the balanced div boxes.
- rrdtool_tune() becomes a thin dispatcher over the three.
Add tests/Unit/RrdTuneRenderTest.php covering the leaf printer, the HTML
and CLI printers, the execute path and the dispatcher, asserting the
output is balanced div markup with no table rows.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* review: post Data Source Troubleshooter actions via cactiPostAction
Address PR review feedback:
- Switch the Apply Suggested Fixes and Rerun Analysis links to the
existing cactiPostAction/data-url idiom (as data_sources.php already
does for ds_repair) instead of upgrading a loadUrl() GET through the
cactiIsPostActionUrl allowlist. The allowlist path replayed the
query-free mutation URL into browser history, so a refresh reopened
the list instead of the selected Data Source; a full cactiPostAction
submission follows the server redirect to the read-only view URL and
records that in history. The run_repair / run_debug csrf_require_post
guards are retained, and the data_debug.php allowlist entry (and its
now redundant click handlers) are removed.
- Add a callable $executor test seam to rrdtool_tune_execute() (matching
rrdtool_dump_document) so the unit tests assert the tune and resize
commands are actually executed, with resize.rrd produced only when the
resize command runs, rather than passing on the rename alone.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* review: move RrdTuneRenderTest into the Unit/Core/Rrd category folder
Per AGENTS.md, new unit tests belong in a category subfolder rather than
directly under tests/Unit. Move RrdTuneRenderTest there and update the
UnitStubs include depth accordingly.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: TheWitness <copilot@users.noreply.github.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* fix(core): preserve dsstats type and render retention fallbacks
Signed-off-by: Thomas Vincent <thomasvincent@gmail.com>
* test(auth): use certificate expiry truth in rendering assertions
Signed-off-by: Thomas Vincent <thomasvincent@gmail.com>
---------
Signed-off-by: Thomas Vincent <thomasvincent@gmail.com>
* fix: label modern dialog apply/clear with the page button text; show Rows on the bar
The dialog apply button was hardcoded 'Search', which mismatched the page's submit label (e.g. 'Go') and collided with pages that have a filter field named Search (clog). It now uses the configured go/clear button display text. Also route the 'rows' field to the modern bar alongside timespan/refresh so the per-page Rows selector stays visible.
* feature: always label the row-count selector 'Rows'
emit_field() forces the 'rows' field friendly_name to Rows regardless of page-specific naming (Devices, Trees, ...), in both legacy and modern filters. Refresh already renders on the modern bar via field_is_bar.
* feature: order modern bar selectors (Rows, Refresh) and separate them from the buttons
Rows renders first and Refresh second on the modern filter bar, and a vertical separator now divides the selectors (Layouts, Rows, Refresh) from the layout action buttons.
* changelog: 8191.feature fragment for modern filter bar polish
* jQuery 4: replace removed $.isFunction in bundled plugins
jQuery 4.0 removed $.isFunction. contextMenu, colorpicker and timepicker are hand-vendored orphans fixed in place; tablesorter is npm-managed, so it is also rewritten at sync time in build/sync-js.mjs so a rebuild reproduces the fix (no-ops once the upstream fix is released and the pin is bumped).
* Render the Thumbnails and Business Hours graph filter checkboxes as Cacti toggles
* fix: address review — update modern JS docblock and strengthen bar/label tests
Rewrite the create_modern_javascript docblock to describe the page-configured apply/clear labels (and document the change/clear callback params). Extend FilterLayoutsTest to assert the selector|button separator, the applied Rows-then-Refresh ordering, and both go/clear label lookups, and that the hardcoded Search dialog label is gone.
* Filter bar polish: toggle-style filter checkboxes and flicker-free layout buttons
Render the shared filter_checkbox field as a Cacti toggle switch (.checkboxSwitch/.checkboxSlider) so every page's filter checkboxes match the rest of the UI, and start the layout Rename/Delete/Save As buttons hidden so layoutUpdateButtons() reveals them only when applicable instead of flashing visible on load.
* Modern filter: move the timespan selector onto its own second filter line
Timespan controls were rendered inline on the single modern filter bar. Route method=timespan fields into a separate group and emit them as a second filterTable row so the bar isn't overcrowded, matching the legacy multi-row layout. Applies to every modern filter with a timespan (the graph view pages).
* Modern filter: keep toggle checkboxes on the bar with a visible label and tooltip
filter_checkbox fields now count as bar fields so the Thumbnails/Business Hours toggles sit on the single bar instead of the Edit dialog. Their label used .checkboxLabel (display:none by design for forms), which hid the text; switch to .checkboxLabelWanted and always set a title tooltip from the field's title/friendly_name so each toggle is self-describing.
* Modern filter: toggles back in the dialog, restrict auto-apply to bar fields, drop dialog Clear
- Move filter_checkbox toggles back into the Edit dialog (field_is_bar no longer claims them) and render them as a form row: friendly name in the label column, toggle in the value column.
- In modern mode only bar selectors (Rows, Refresh) and the Layout selector auto-trigger a filter change; dialog field changes/clicks no longer call applyFilter (gate changeChain/clickChain on !use_modern_filter() || field_is_bar). Legacy keeps auto-applying on change (text inputs still excluded).
- Remove the Clear button from the modern Edit dialog and the now-unused clearLabel; update the dialog-labels test accordingly.
* Fix filter toggle vertical alignment across themes
The generic .filterTable .filterColumn label { vertical-align: -10% } nudge (meant for text labels) out-specified .checkboxSwitch and dragged the toggle switch down, which also pulled the adjacent label baseline low in the Edit dialog and misaligned the toggle on the legacy filter bar. Add a higher-specificity label.checkboxSwitch { vertical-align: middle } in every theme carrying the rule (midwinter has no such rule).
* Hide the filter search glyph in the modern Edit dialog
Theme main.js appends a ti-search glyph after #rfilter, positioned for a table cell; in the modern Edit dialog #rfilter sits in a wide div (no td), so the glyph wraps below the field. Skip the injection when #rfilter is inside .cactiFilterEditTable (modern dialog); legacy, which has no such ancestor, keeps the glyph.
* jQuery 4: full removed-API sweep of bundled plugins
Replace every jQuery-4-removed helper across the vendored plugins: \$.trim -> String.prototype.trim, \$.isArray -> Array.isArray, \$.proxy -> Function.prototype.bind, \$.parseJSON -> JSON.parse, \$.type -> typeof/\$.isPlainObject, \$.isWindow -> native window check (plus the earlier \$.isFunction). Orphans (colorpicker, timepicker, multiselect, multiselect.filter, tableDnD) are fixed in place; the npm-managed tablesorter core+widgets are rewritten at sync time in build/sync-js.mjs so a rebuild reproduces the fix.
* Modern filter dialog: non-modal, Apply gated on save, Save keeps dialog open
- Rename the dialog apply action to Apply and disable it until the (new or changed) filter is saved (layoutDirty tracking); Close just closes without applying.
- Save no longer reloads the page: it reflects the saved layout in the selector and re-enables Apply, keeping the dialog open.
- Dialogs are now modal: false.
- Switch the layout selector change from a full document.location reload to an AJAX loadUrl().
- Vertically center the modern bar cells so the barSep separator lines up between the buttons.
* Modern filter: add layout to the filter's session variable structure
Register layout (FILTER_VALIDATE_INT, default 0) in sanitize_filter_variables() alongside page so the selected layout is validated and stored in the filter's session object and persists across page views.
* Modern filter: Graph Template amalgam on line 2, timespan on line 3
Tag the Graph Template + Source/Order/CF/Measure group ('bar' => true on graph_template_id and the html_graph_order_filter_array() metrics) so create_modern_filter renders it as its own second filter line on Graph View and Tree View, pushing the timespan to the third line. These bar fields also auto-trigger the filter so the Template->Source->Order callback chain works on the main bar.
* Fix graph_template_id multi-select: allow comma lists, type get_host_graph_list correctly
get_host_graph_list() immediately transforms graph_template_id via html_transform_graph_template_ids() (handles cg_/dq_ prefixes and comma lists), so its parameter is a string, not an int -- correct the type hint and docblock. Also widen the preview and listview graph_template_id validation regexp to accept a comma-separated list like 'cg_118,cg_106,cg_119', matching the tree filter.
* Modern filter: hide the whole cell for hidden layout buttons to even out bar separator spacing
The Rename/Delete/Save As buttons hid only the <button>, leaving their table-cell (with padding) in the bar, so the separator after them was pushed away from Edit. Put the display:none on the .filterColumnButton cell and toggle the cell in layoutUpdateButtons so hidden buttons take no space and the separators sit evenly between the visible buttons.
* Remove legacy .drop-callback/makeCallbacks() autocomplete widget
The Device dropdown and other form_callback() lookups now always use the
ajax-backed select2 selectmenu. Drop the old makeCallbacks() jQuery-UI
autocomplete entirely and have form_callback() render the select2-callback
<select> by default, keeping the plain full-list <select> only when the
'autocomplete' config option is enabled.
* Carry selected layout through the modern dialog Apply action
The layout_save callback already returns the new layout id (and url), and
layoutDialogSave() selects it in #filter_layout. The dialog Apply button,
however, ran the plain filter apply (applyFilter()) which rebuilds the URL
from the field values and omits filter_layout, so the page reloaded as
(New Filter). Apply now navigates to the selected layout's data-url (which
includes filter_layout=<id>) when a layout is selected, falling back to the
normal filter apply when none is.
* Fix Filter Layouts manage page table and use jQuery UI dialogs for delete/rename
The management table was opened with html_start_box(\ = true), emitting a
<div> instead of a <table>, so the header and rows rendered unstyled and
run-together. Switch it to table mode.
Replace the generic confirm()-based delete with a CDEF-style jQuery UI
confirmation dialog loaded over ajax, and add a Rename action that opens a
matching jQuery UI dialog with a name field. Both post to the existing
layout_delete/layout_rename handlers on confirm.
* Use jQuery UI dialogs for filter-bar layout rename/delete; drop rename from manage page
The filter bar (modern and legacy) was still using native prompt()/confirm()
for the layout Rename and Delete actions - convert both to jQuery UI dialogs
(a name-entry dialog for rename, a confirm dialog for delete).
On the Filter Layouts management page, remove the rename action entirely and
instead link the layout name to its page (with filter_layout set) as an edit
link; keep the Delete confirmation dialog and Publish action.
* Rework Layouts manage page: preset filter bar + actions dropdown; rename to Layouts
Model layouts.php on the preset pages (CDEFs, etc.): add the standard
CactiTableFilter search bar in the legacy look, a sortable list with a
checkbox column, a pager, and a draw_actions_dropdown with Delete, Make
Global (publish), and Make Local (reassign to the current user). The
unimpressive per-row action icons and ajax dialogs are replaced by the
checkbox/confirmation flow. Make Global/Make Local are admin-only.
Treat layouts.php as a filter_layouts preset page so its own filter bar
does not offer the layout dropdown. Rename the page title and Console
Presets menu entry from 'Filters'/'Filter Layouts' to 'Layouts'.
* Show friendly page name in the Layouts list Page column
Map the stored page basename to the Console navigation title (e.g. host.php
=> Devices) via a layouts_page_name() lookup against \, falling
back to the raw basename. The Page column is now nosort since the displayed
label no longer matches the sortable database value.
* Fix filter search TypeError: use filter_options key in default search field
sanitize_filter_variables() reads a field's callback options from the
'filter_options' key, but the default search field in create_default() stored
them under 'options', so the key never reached validate_store_request_vars().
That left FILTER_CALLBACK with no callback and raised 'filter_var(): Option
must be a valid callback' whenever a table filter was searched.
* Address PR scan findings: tablesorter useless conditional + layouts SQL
- jquery.tablesorter.js: drop the redundant 'str &&' guard inside the
already-truthy 'str ?' branch of the digit and currency parsers (CodeQL
useless-conditional). Add a matching sync-js transform rule so a rebuild
from upstream keeps the simplification.
- layouts.php: fully parameterize the management list queries with bound
'?' parameters for the search term and user id, and build the LIMIT from
explicit (int) page/rows, so no request variable reaches the SQL string
(Semgrep cacti-request-var-in-sql).
* Address PR review: colorpicker trim, tablesorter JSON guard, bar separator, i18n
- jquery.colorpicker.js: _setAltField() iterated index <= properties.length, so
the last pass read properties[undefined]; \$.trim(undefined) was '' but native
.trim() throws. Iterate with < so no TypeError.
- jquery.tablesorter.widgets.js: the retrieveValue feature-check still tested the
removed \$.parseJSON; under jQuery 4 it was always falsy so saved widget state
never loaded. Test native window.JSON.parse instead, and add a matching
build/sync-js.mjs transform rule so a rebuild keeps the guard.
- html_filter.php: the Layouts selector is always rendered, so emit the
selector-to-button separator unconditionally (graph preview routes fields to
the amalgam/timespan lines, leaving the bar line without it before).
- changelog/i18n: reword 8191.feature to describe the Apply (save-gated) dialog
action, and add the new layouts.php/html_filter.php msgids to cacti.pot.
* Add tablesorter transform coverage to the sync-js test
Feed a fixture containing every removed jQuery 4 utility (\$.isFunction,
\$.trim, \$.type ===string/object, \$.isWindow, \$.isArray, \$.parseJSON calls
and the bare if (\$.parseJSON) guard) plus the CodeQL str && simplification
through syncAssets, and assert the synced tablesorter output contains the
native equivalents and none of the removed APIs. Previously the transform ran
against a generic stub, so an incomplete rewrite could pass unnoticed.
* Apply php-cs-fixer: comment style, alignment, and single-quote strings
Run through the project php-cs-fixer config (the mandatory pre-PR check):
line comments for the input-validation banners, aligned assignment, and
single-quoted strings where no interpolation is used. No behaviour change.
* Render the filter Go action as a refresh glyph button (modern + legacy)
Replace the 'Go' text submit with a compact 'ti ti-refresh' glyph button
titled 'Refresh page' for every page filter:
- emit_field() forces the glyph/title on any 'go' submit, so both the shared
default and pages that define their own 'go' get it on the legacy filter.
- The modern bar (which has no form) gets a JS-wired #layout_refresh glyph
button right of Edit that loadUrl()s the selected layout url (carrying
filter_layout) or the page change callback.
Add the 'Refresh page' msgid to cacti.pot and note it in 8191.feature.
* Add a Tabler .icon-rotate spin class and use it for refreshing icons
Tabler ships only the icon webfont, with no fa-spin equivalent, so spinning
reload icons stopped animating (e.g. the Troubleshooting > Data Sources
auto-refresh indicator). Define .icon-rotate in every theme (reusing the
globally loaded fa-spin keyframes) and apply it:
- the modern filter refresh button spins while it loads,
- the realtime graph drill-down loader switches from fa-spin to icon-rotate,
- the data_debug auto-refresh indicators spin again.
* tests: sync FilterLayouts assertions with the reworded separator comment and dw.addClass
The source scan expected the old 'Separate the selectors' comment and a chained
.dialog('widget').addClass() form; update to the current reworded comment and
the 'var dw' + dw.addClass('cactiFilterDialog') the dialog now uses.
* Glyph-ify the timespan Refresh/Clear and the generic Clear action
Replace the timespan 'Refresh' text button with a spinning ti ti-refresh glyph
and 'Clear' with a ti ti-eraser glyph (also fixing a stray double </span>), and
make the generic filter Clear a ti ti-eraser glyph button across legacy and
modern via emit_field (button case now honours a 'glyph' key). The timespan
refresh icon spins (icon-rotate) while it reloads.
* Glyph-ify filter Import/Export, layout, and modern-bar action buttons
Force ti-table-import / ti-table-export glyphs for any filter button named import/export (centralized in emit_field like go/clear), so page-defined Import/Export buttons and the modern bar's always-visible action strip render consistent Tabler glyphs. Add a glyph parameter to layout_button() and glyph the Edit/Rename/Delete/Save As/Save/New/Publish buttons across the modern bar and legacy layouts row.
* Use table-import/table-export glyphs for cactiTableButton Import/Export icons
The filter header Export/Import icons injected into cactiTableButton used generic chevron-down/chevron-up glyphs; switch them to ti ti-table-export / ti ti-table-import to match the rest of the glyph theme.
* Glyph-ify the Save Filter Defaults button on the filter bar
The has_save 'Save' action rendered as a text button on the modern bar (and legacy filter); force a ti ti-device-floppy glyph via emit_field like go/clear/import/export so it matches the rest of the glyph theme.
* Regenerate tree-view graphs when applying a saved filter layout
The modern layout selector loaded a layout's saved data-url (action=tree) directly, so on the Graph Tree view it pulled the tree shell instead of regenerating graphs. Route the layout-url loads (selector change, refresh button, and dialog Apply) through correctUrlParameters() so action=tree becomes action=tree_content and graphs reload into #main, matching applyGraphFilter(). No-op on non-tree pages.
* Keep timespan controls working after ajax reloads and tip custom date fields
On the Graph Preview page the predefined_timespan change and tsrefresh/tsclear/shift click handlers were bound directly inside the filter's inline ready script, so an ajax content reload that replaced the timespan controls dropped the bindings (a full page refresh restored them). Bind them with namespaced event delegation on document so they survive content replacement and never double-bind. Add tooltips to the custom start/end date inputs telling the user to click Refresh to apply the range, plus POT entries and a changelog note.
* Record layouts.php static redirect in the sink inventory baseline
The sink and architectural hotspot guard flagged inventory drift: layouts.php's static header('Location: layouts.php') redirect (no request input) was never added to the tracked baseline. Refresh the baseline via tests/security/build_sink_inventory.sh to record it.
* Fix layout Save-As dialog state and use cacti_redirect in layouts.php
Address review findings: (1) use cacti_redirect('layouts.php') instead of a raw header()+exit so the standard redirect checks run (and drop the now-unneeded sink-inventory entry); (2) reset the dialog's force-new flag after the first successful save so later saves update the created layout instead of creating duplicates; (3) preserve an existing dirty state when reopening the Edit dialog so pending edits are not silently discarded by Apply.
* Drop stale layout msgids from the translation template
Remove the Filter Layouts, Published to all users, Publish to all users, and No Filter Layouts Found msgids that this PR replaced (now Layouts, Make Global, Make Local, No Layouts Found); all four are absent from PHP. Keeps the surgically-maintained POT in sync with the shipped strings.
---------
Co-authored-by: TheWitness <TheWitness@users.noreply.github.com>
* hardening: sanitize JS output contexts and add tests
* hardening: encode return targets in password flow JS handlers
* hardening: address review feedback in JS context fixes
* refactor: extract sanitize_graph_id_list() helper
Extracts repeated graph list CSV parsing into a reusable function
per TheWitness review on #6827. Uses ctype_digit validation and
deduplication. Replaces inline loop at line 1435.
Signed-off-by: Thomas Vincent <thomasvincent@gmail.com>
---------
Signed-off-by: Thomas Vincent <thomasvincent@gmail.com>
Co-authored-by: TheWitness <thewitness@cacti.net>
* Fix#6539 - Allow Standard Cacti Log Files to be Rotated on Demand from the Cacti UI
* QA: php-cs-fixer updates and documentation for lib/database.php
* QA: Update .gitignore for composer files
* QA: Update .gitignore for composer files
* QA: Back off .gitignore change its duplicated
* QA: Fix typing of db_has_permissions
* QA: Fixing typing issue in db_format_index_create
* Update lib/clog_webapi.php
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* QA: Fix additional code issues
* QA: Applying more defaults to add device
* QA: Fix at the database layer
* QA: Fixes based upon automated testing
* QA: Fix at the database layer
* QA: After new SQL checking
* QA: Skip MacTrack oui database download warnings
* QA: Fixing type issue
* QA: Recommendation from Copilot
* QA: Recommendation from Copilot
* QA: Recommendation from Copilot
* QA: Recommendation from Copilot
* QA: Some minor changes to avoid errors in testing
* QA: Unused variable
* QA: Recommendation from Copilot
* QA: Recommendation from Copilot
* QA: Recommendation from Copilot
* QA: Minor introduced code defect
* QA: Adding some unifying space around concatination
* QA: Consistent comments and new function alias'
* QA: Multi-line comment corrections
* QA: Fix SQL Style
* QA: Missed one function alias
* QA: PHPStan Level 2 and PHPDoc fixes
* QA: PHPStan Level 2 and PHPDoc Fixes
* QA: PHPStan Level 6 Fixes
* QA: Fix lib/xml.php to PHPStan Level 6
* QA: Wrong grep -v
* PHPStan Level 6 for lib/vdef.php
* PHPStan Level 8 for lib/time.php
* QA: Raise PHPStan to Level 6 for lib/database.php
* QA: Remove @deprecated tag from grv()
* QA: Switch to htmle() alias over html_escape()
* QA: More addressing PHPStan issues at Level 6
* QA: Change recommended by Copilot for Readability
* QA: More PHPStan fixes
* QA: More PHPStan fixes
* QA: More PHPStan fixes for lib/utility.php
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: Raise PHPStan to Level 6 More Functions
* QA: More PHPStan fixes at Level 6
* QA: Some phpseclib3 fixups to update to latest
* QA: More fixups for graphing for magic strings
* QA: More PHPStan fixes at Level 6
* QA: Fixing order string type on get_allowed_graphs()
* QA: Fixing improper use of print
* QA: Optimization of color_templates
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Copilot recommendation
* QA: Raise PHPStan to Level 6 More Functions
* QA: Issues insalling Cacti
* QA: Issues insalling Cacti
* QA: Issues insalling Cacti
* QA: Issues insalling Cacti
* QA: Issues insalling Cacti
* QA: Issues testing Cacti
* QA: Copilot recommendation
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: More PHPStan fixes at Level 6
* QA: Installer failing
* Undo ownership changes to remove tar errors
* QA: Updates after php-cs-fixer
* QA: Adding code checks to syntax checking
* QA Change syntax flow language
* QA: Reduce the number of cures
* QA: Use sequentional option
* Change runner to self-hosted for check job
* Fix typo in OS version in workflow file
* Add Git installation step in workflow
Added step to install Git if not already installed.
* Add '-y' flag to apt-get install and update commands
Updated apt-get commands to include '-y' for automatic confirmation.
* Change workflow OS version to 'ubuntu-latest'
Updated the workflow to use 'ubuntu-latest' instead of 'ubuntu:latest' and modified the 'runs-on' configuration.
* Remove sequential option from phpcsfixer script
* Remove PHPCS fixer step from workflow
Removed PHP coding standards check from workflow.
* Move code checks to before plugins
Moving these core checks to before the plugins are installed as we really want to check only the base Cacti here.
* Add Composer validation and caching to start of workflow
* QA: Addressing PHPStan additional
* QA: Restore composer lock file
* QA: Addressing PHPStan additional
* QA: Addressing PHPStan additional
* QA: Complete LDAP Project
* QA: php-cs-fixer doing it's thing
* QA: Syntax is already happening in PHPStan
* QA: The md5 function no longer exists
* QA: Update after ldap changes
* QA: Undo that last password hack
* QA: Attempting to switch to MariaDB 11.8
* QA: Attempting to switch to MariaDB 11.8
* QA: Resolving some issues with PHP8.4
* QA: Resolving some issues with PHP8.4
* QA: Add PHP8.5 to the matrix
* QA: Removing PHP8.5 due to dependency issues
* QA: Add the DB version to the testing output
* QA: Switch back to MySQL for the moment
* QA: More fidelity in reporting
* QA: The pipe must be mixed
* QA: Moving audit_schema.php changes from 1.2.x
* QA: Moving audit_schema.php changes from 1.2.x
* QA: Restore mysql monitoring
* QA: php-cs-fixer issues
* QA: Attempt to roll back to MariaDB 10.6
* QA: Attempt to fix check_all_pages.sh
* QA: Make installer functional again
* QA: Fix installer php-cs-fixer issues
* QA: Type to a string
* QA: Get the database version correctly
* QA: Fix issue with reports in check_all_pages.sh
* QA: Check the server version in the right place
* Feature: Support SHA256 as a new hash for passwords
* QA: Function definition and return typing audit
* QA: Refinement of form types
* QA: Refinement of form types
* QA: Consistency of comments
* QA: Issues with php-cs-fixer and more comments
* QA: More typing issues
* QA: php-cs-fixer on merge conflict resolution
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
This removes most entries to $config in the base code. A few new constants were defined to achieve this:
* CACTI_CONNECTION - The status of the current connection
* CACTI_CSRF_SECRET - The path to the csrf secret file
* CACTI_PHP_SNMP - True if php-snmp is installed
* CACTI_WHITELIST - The path to the Cacti Whitelist file if defined
I also moved several $config['poller_id'] to the existing POLLER_ID and move a number of $config['is_web'] to the existing CACTI_WEB constants.
There remain a few artifacts in the code. They will be handled in a separate commit.
* Introduce a new wrapper function for showing the show/hide column indicator
* Migrate all Core packages to use that new wrapper function
* Migrate pages to have JavaScript show immediately below the form object.
* Correct some indentation issues
- When a developer uses backtracing, HTML output can be seen from command line bug confirmed
- When using `input_validate_xxx`, calls to `die_html_input_error()` do not pass variable name bug confirmed
Closes#3559Closes#3560
Update loadPage calls to be loadUrl
Update loadPageNoHeader calls to be loadUrl calls
Also includes changes to make logout adhere to new html_auth_xxx functions
- Data Debug Troubleshooter does not pick up invalid RRD_heartbeat settings
- Data Debug Troubleshooter Reports False Positive Issues with Missing Data Sources
* In a recent audit of core Cacti code, there were a few stored XSS issues that can be exposed
* Also removed a few spurious title_trims, that should no longer be a problem.
When sorting data debug checks by user, no results are shown and
errors recorded into the cacti log because the user field was being
looked up seperately. However, there is no need for this as it can
all be done in the SQL statement so removed the extra code and had
SQL bring the user in allowing it to be sortable.
Closes#3713
* Vulnerability report: Lack of escaping on some pages can lead
to XSS exposure
* Also cleaning up additional copyrights
* Make the way filter headers are escaped consistent
-issue#2590: Language selection is not working as expected
-issue#2605: When checking for tables to upgrade, undefined variable $config error occurs
-issue#2608: db_update_table() function should not require an engine type or comment
-issue#2610: Data Sources troubleshooter generates warning that each() function is deprecated
Closes#2590, 2605, 2608, 2610
