mirror of
https://github.com/cozystack/cozystack.git
synced 2026-11-09 22:13:18 +09:00
docs/roadmap-dco
563
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Aleksei Sviridkin
|
87a64071a7 |
fix(cilium)!: take cilium's own addresses from a block kube-ovn does not hand out (#4778)
## What this PR does
fixes #3740.
on the kube-ovn variants cilium allocates no pod ips, but the agent
still takes its router ip (`cilium_host`, `CiliumInternalIP`) and the
gateway api ingress ip from its own allocation cidr. with `ipam.mode:
kubernetes` that's `Node.spec.podCIDR`, a /24 out of the same /16
kube-ovn hands pods from, so sooner or later kube-ovn gives a pod an
address cilium already holds. we hit it on three clusters, details in
https://github.com/cozystack/cozystack/issues/3740#issuecomment-6022394243.
**what changes**
- the kube-ovn variants run cilium with `ipam.mode: cluster-pool`, a /29
per node out of the last /21 of `networking.podCIDR` (`10.244.248.0/21`
for the default /16). the platform derives the block from
`networking.podCIDR` and passes the same range to kube-ovn as
`--default-exclude-ips`, so a fresh install never hands it to pods.
- the block sits inside the pod cidr on purpose. envoy reaches gateway
api backends from the node's ingress ip, and kube-ovn masquerades host
originated traffic only when the source is in `ovn40subnets`. with the
`100.65.0.0/16` pool from the issue a nodeport through the gateway
answered 200 only on the backend's node and 503 `upstream connect error
... connection timeout` on the other two. with the block inside the pod
cidr it's 200 from all three. worth a look on the ci side too. the ci
sandbox sets talos `podSubnets` to `100.65.0.0/16`, so cilium's ingress
ips there already come from outside `ovn40subnets`, and the gateway e2e
checks Accepted, Programmed and the lb service but sends no request
through a listener, so it wouldn't notice. with this pr the sandbox
takes its block from the pod cidr like everyone else.
- the end of the /16 is what kube-ovn reaches last. it hands out the
lowest free address and reuses released ones only when the free range
runs dry (`pkg/ipam/subnet.go` and `pkg/ipam/ip_range_list.go` at
v1.15.26). a /21 cut into /29s covers 256 nodes.
- the slim variants and guest clusters stay on `ipam.mode: kubernetes`.
cilium is the only cni there and `Node.spec.podCIDR` is the pod range.
- `networking.podCIDR` now needs /20 or wider on the kube-ovn variants,
otherwise the render fails and says why. an install that rendered before
can stop rendering at upgrade, hence the `!`. a /21 cut into /29s also
caps these variants at 256 nodes, a fresh install included.
**existing clusters**
a post-upgrade hook in the cilium chart moves them
(`templates/ipam-migration.yaml`, `files/ipam-migration.sh`). before it
touches anything it checks that the block has a /29 for every CiliumNode
and that it lies inside kube-ovn's default subnet, and stops with both
cidrs printed otherwise. a node cleared past the pool's capacity would
lose pod networking on its next agent restart, and a block outside the
subnet puts the agents outside `ovn40subnets` again. it has to be
post-upgrade. platform migrations run as the platform's pre-upgrade
hook, while every agent still runs `ipam.mode: kubernetes` and writes
`Node.spec.podCIDR` back into a cleared CiliumNode
(`pkg/nodediscovery/nodediscovery.go` at v1.19.5), so the move can only
happen after the cilium release switched the mode. the job runs on the
host network against the agent's own api endpoint (kubeprism on talos),
because it restarts the agents.
1. adds the block and every node's current ingress ip to `excludeIps` of
the default subnet, in one json patch with a `test` op, and reads the
subnet again on conflict, since kube-ovn rewrites that list into its own
order right after a patch. the old ingress ip goes in because cilium
1.19.5 keeps a former ingress ip in the agent's ipcache as
`reserved:ingress` after the move. we saw 2 to 3 such entries per node
hours later. old router ips leave the ipcache and go back to kube-ovn.
2. stops right there if an address in the block is still allocated,
names it, and moves no agent. it first checks the subnet status it
patched against, then waits until `status.v4availableIPrange` stops
offering the block, which is kube-ovn having applied the exclusion, and
then reads the `ips.kubeovn.io` objects of the default subnet. the
status alone can't answer it, kube-ovn leaves excluded addresses out of
`v4usingIPrange` (`GetSubnetIPRangeString` in `pkg/ipam/ipam.go` at
v1.15.26), so a pod still in the block would be invisible on a retry
where the exclusion is already in place. recreate those pods and the
next upgrade retry goes through.
3. one node at a time, clears the inherited /24 from
`spec.ipam.podCIDRs` (again with a `test` op, so a concurrent writer
fails the patch instead of losing an update), waits for the operator to
allocate a /29 from the block and restarts that node's agent. a node
that isn't ready is skipped and its agent picks up the block when it
starts. nodes already moved are left alone, so a retry after a timeout
just continues. the hook runs inside the cilium upgrade, so where
restarting every agent takes longer than the upgrade timeout, 10m by
default, the release first reports a failed upgrade and the move
finishes on the retry.
running pods keep their addresses. every agent restarts twice on
upgrade, once when the config change rolls the daemonset and once from
the hook, and while it restarts host to pod traffic on that node blips
for a few seconds because the router ip moves. a pod that sits on a
router ip today is reachable again after the move, the node no longer
holds that address. a pod on a node's current ingress ip keeps it and
that node keeps seeing it as `reserved:ingress`, so recreate it. the
hook logs those pods by name.
### Validation
- `helm unittest` passes cilium 23/23, platform 246/246 and kube-ovn
22/22. the new suites pin the rendered `cilium-config` keys per variant,
the hook shape, env and rbac, and the platform wiring for the talos and
generic branches, a custom pod cidr, host bits in the network address,
the refusals for a too small or non ipv4 cidr, and the slim variant.
- on a trial merge with main at
|
||
|
Aleksei Sviridkin
|
0a2bb5ef98 |
fix(cert-manager): enable the Gateway API solver in the host cert-manager (#4039)
## What this PR does With the platform Gateway enabled, the ClusterIssuers in `cert-manager-issuers` and the per-tenant Issuers rendered for `TenantGateway` carry an `http01.gatewayHTTPRoute` solver, but the controller refuses it: the vendored chart never turns Gateway API support on, so every HTTP-01 challenge behind the Gateway fails with `gateway api is not enabled` and no certificate is issued. This passes a `ControllerConfiguration` with `enableGatewayAPI: true` to the host cert-manager through the component values of its platform Package. The host ships the Gateway API CRDs on every variant and orders cert-manager after them, so the flag is safe there. It is deliberately not a default of the `system/cert-manager` chart. The same chart is installed into tenant Kubernetes clusters, where the CRDs are an opt-in addon, and cert-manager v1.20 exits at startup when Gateway API support is on and the CRDs are missing. The tenant HelmRelease in `packages/apps/kubernetes` already passes the same `ControllerConfiguration` when its `gatewayAPI` addon is enabled, so both clusters now opt in from the layer that knows whether the CRDs are there, and the chart itself stays neutral. The new tests pin both halves: the host Package carries the flag and the preconditions that make it safe, and the chart wires `config` through to the controller while shipping none by default. Closes #3725 ### Screenshots Not applicable, no UI changes. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: ### Release note ```release-note fix(cert-manager): enable the Gateway API solver in the host cert-manager, so ACME HTTP-01 challenges succeed when the platform Gateway is enabled ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **New Features** - Supported system bundles can now use cert-manager’s Gateway API HTTPRoute solver to issue certificates. - Hosted deployments include the required Gateway API custom resource definitions, installed before cert-manager. - Gateway API solver support remains opt-in in environments that do not provide the required definitions, avoiding unintended changes to certificate management there. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Aleksei Sviridkin
|
76b9e55102 |
fix(cert-manager): enable the Gateway API solver in the controller
With the platform Gateway enabled, the ClusterIssuers in cert-manager-issuers and the per-tenant Issuers rendered for TenantGateway carry an http01.gatewayHTTPRoute solver, but the controller only honours that solver when Gateway API support is switched on, and the vendored chart leaves it off. Every HTTP-01 challenge behind the Gateway then fails with "gateway api is not enabled" and no ACME certificate is issued. Pass a ControllerConfiguration with enableGatewayAPI to the host cert-manager through the component values of its platform Package. The host always ships the Gateway API CRDs and orders cert-manager after them, so the flag is safe on every variant. It is not a default of the system/cert-manager chart: the same chart is installed into tenant clusters, where the CRDs are an opt-in addon and a controller started with Gateway API support and no CRDs exits at startup. The tenant side keeps opting in on its own. Signed-off-by: Aleksei Sviridkin <f@lex.la> Assisted-by: LLM |
||
|
Myasnikov Daniil
|
d61fed46cc |
feat(local-storage): add opt-in OpenEBS LocalPV hostpath package
LINSTOR needs the DRBD and ZFS kernel modules, so a cluster without them has no dynamic PV provisioning. OpenEBS LocalPV hostpath needs no kernel modules and also serves deliberately node-local workloads. The package is opt-in so it cannot change an existing cluster. Its class is named cozystack-local-hostpath so it cannot collide with an existing class name, and it is not the default so PVCs that omit storageClassName keep their current binding. The vendored RBAC is patched down to what volume reconciliation calls; helper Pods, Leases and analytics state stay in the install namespace. Images stay on docker.io, pinned by index digest. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Myasnikov Daniil
|
974aaa0bac |
test(hack): regenerate the selective install fixture
Two optional Cluster API providers, Proxmox and in-cluster IPAM, were added to the platform sources after the fixture was generated. The drift test compares the fixture with the current disable list, so it failed until they were added. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Myasnikov Daniil
|
f46a9797b8 |
fix(hack): keep platform services in selective installs
Dropping every package that no suite owns also drops services the rest of the platform relies on: multus for secondary networks, the cozystack and LINSTOR schedulers, flux-plunger, cozy-proxy and ouroboros, whose hairpin NAT the Kubernetes suites assert. Nothing waits for them, so no PackageSource edge reaches them, and adding one would also change reverse test selection. The remaining packages stay uninstalled on purpose, also when test selection answers with every suite: nothing in the run looks at them, so installing them only adds a readiness wait. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Myasnikov Daniil
|
59555c895e |
fix(hack): retain controllers and APIs for selective installs
Tenant HelmReleases need a shard reconciler, and the root SeaweedFS release creates COSI resources even when no backup suite is selected. Without those controllers, a fresh reduced install cannot become ready. The Kubernetes suites create worker pools through KubernetesNodes, and MongoDB renders an operator-owned CR. Selecting only the cluster API or application chart drops resources those suites require. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Myasnikov Daniil
|
361893e6f4 |
fix(hack): retain backup APIs in selective installs
Backup roundtrip suites create Bucket and backup resources that the application graph does not require. A graph-only closure therefore omits the APIs those suites need on a fresh install. Assisted-By: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Myasnikov Daniil
|
610578be16 |
test(hack): verify selective install contract
A missing suite owner or a discarded discovery failure can leave a reduced install without the APIs its tests exercise. Graph-only checks cannot establish that the chart preserves the requested package set. Assisted-By: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
Yan Bondarenko
|
dc362fa591 |
fix(cilium)!: take cilium's own addresses from a block kube-ovn does not hand out
On the kube-ovn variants Cilium allocates no pod addresses, but the agent still takes its router IP and the Gateway API Ingress IP from its allocation CIDR. In ipam.mode kubernetes that is Node.spec.podCIDR, which the documented installs slice from the same range kube-ovn allocates pods from, so kube-ovn sooner or later hands a pod an address Cilium already holds. Cilium now runs ipam.mode cluster-pool on the kube-ovn variants, with a /29 per node from the last /21 of networking.podCIDR, and kube-ovn excludes that /21 through --default-exclude-ips. The block stays inside the pod CIDR on purpose. Envoy reaches Gateway API backends from the node's Ingress IP, and kube-ovn masquerades host-originated traffic only when the source lies in one of its subnets, so a block outside them such as 100.65.0.0/16 breaks Gateway API traffic that crosses nodes. A post-upgrade hook moves existing clusters. It first checks that the block has a /29 for every node and lies inside kube-ovn's default subnet, and stops without changing anything otherwise. It adds the block and every node's current Ingress IP to excludeIps of that subnet, because the agent keeps a former Ingress IP in its ipcache as reserved:ingress. It then waits until kube-ovn stops offering the block and stops if an address in it is still allocated. kube-ovn leaves excluded addresses out of the subnet status, so that check reads its IP objects. Then, one node at a time, it clears the inherited /24 from the CiliumNode, waits for the operator to allocate from the block and restarts the agent. networking.podCIDR now needs a prefix of /20 or shorter on the kube-ovn variants, and the render fails otherwise. A /21 cut into /29s also caps these variants at 256 nodes. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
Aleksei Sviridkin
|
bcda5c893a |
feat(kubevirt)!: drop HotplugVolumes for declarative volume hotplug (#4453)
## What this PR does This turns off the deprecated KubeVirt `HotplugVolumes` gate and moves the platform to declarative volume hotplug. It changes how every volume hotplug on the platform works, so the title carries `!`. Closes #4032. This PR is stacked on #4451 and has to merge after it. #4451 adds the kubevirt-csi flag this PR flips. The replacement gate is already on in KubeVirt 1.9, and the old gate is the only thing keeping it off. `DeclarativeHotplugVolumes` is Beta at v1.9.0, and Beta gates are on by default. virt-controller skips `handleDeclarativeVolumeHotplug` while `HotplugVolumes` is on, so dropping the old gate is what switches the new one on. The kubevirt-csi fallback goes off in the same change. With the old gate off, virt-api rejects the VMI-level `removevolume` on a VM-owned VMI, so the chart now passes `--enable-vmi-hotplug-fallback=false`. The comments next to the gate and the flag point at each other. This needs the rebuilt kubevirt-csi image. A driver built before #4451 does not know the flag and exits on it at startup. The image is stamped at release preparation and ships in the same release as this change, so only a `make apply` from main before then would crash-loop the CSI controller. What changes at runtime on an upgrade: - The VM-level `addvolume` and `removevolume` calls now edit `VM.spec` directly. virt-controller then makes the VMI hotplug volumes match it, instead of going through `VM.status.volumeRequests`. - Volumes hot-plugged through the VM subresource are in `VM.spec`, so they stay attached. - During a tenant teardown, when the VM goes before its VMI, the driver no longer calls the VMI subresource. It waits for the VMI status to drop the volume, and the garbage collector deletes the VMI with its VM. Upstream waits up to two minutes. If the VMI is still there after that, the unpublish fails and is retried. A new platform migration keeps old VMI-only volumes attached. On its first pass virt-controller removes every hotpluggable VMI volume that is missing from `VM.spec`. Until July 2025 kubevirt-csi attached volumes at the VMI level (the Role then granted `virtualmachineinstances/addvolume`), and live migration carries such a VMI across KubeVirt updates. Without help, a tenant node not recreated since then would lose a mounted disk on upgrade. Migration 59 copies each such volume and its disk from the VMI into the VM template before anything else changes. Adding a hotplug volume to the VM spec is a valid live update in KubeVirt, so no VM needs a restart. It runs as the platform chart's pre-upgrade hook, before the upgrade re-points `cozystack-packages`. The KubeVirt CR and the tenant kubernetes charts both render from that source, so the gate and the flag cannot change before the migration has finished. It only touches VMs that need it, logs each one, and a second run changes nothing. The migration also makes ephemeral hotplugs permanent. A volume a user added at the VMI level, for example with `virtctl addvolume` without `--persist` from an older virtctl, has the same shape as kubevirt-csi's old attachments, because virt-api builds both the same way. There is nothing reliable to tell them apart by, so both are copied. Leaving the user's volume out would not keep it ephemeral: the first reconcile would unplug it from the running VM. After the upgrade it is part of `VM.spec` and attaches again on a restart, and `virtctl removevolume` drops it. Ephemeral hotplug stops working on VMs. With the old gate off, virt-api refuses VMI-level `addvolume` and `removevolume` on a VMI that a VM owns (`vmiVolumePatch` in v1.9.0). A volume on such a VMI is added and removed through the VM from then on. A VMI without a VM is not affected. Only running VMIs are copied. virt-controller reconciles no other VMI, and a stopped VM builds its next VMI from `VM.spec`, so copying from a stopped one would bring back volumes the restart was going to drop. Migrations run only on the isp-full, isp-full-generic and isp-hosted variants. KubeVirt comes from the platform only on isp-full and isp-full-generic, so those are covered. On the default variant, where packages are installed by hand, nothing runs the migration. This optional check lists the VMIs and volumes the migration would copy. It uses the same rule. On the default variant, run it before upgrading and recreate each tenant node it lists: ```bash kubectl get vm,vmi --all-namespaces --output json | jq --raw-output ' ([.items[] | select(.kind == "VirtualMachine") | {key: "\(.metadata.namespace)/\(.metadata.name)", value: [.spec.template.spec.volumes[]?.name]}] | from_entries) as $vm | .items[] | select(.kind == "VirtualMachineInstance") | ([.metadata.ownerReferences[]? | select(.controller == true and .kind == "VirtualMachine" and (.apiVersion | startswith("kubevirt.io/"))) | .name][0]) as $owner | "\(.metadata.namespace)/\($owner)" as $key | select(.status.phase == "Running" and $owner != null and $vm[$key] != null) | .spec.volumes[]? | select(.dataVolume.hotpluggable == true or .persistentVolumeClaim.hotpluggable == true) | .name as $n | select($vm[$key] | index($n) | not) | "\($key) \($n)"' ``` Empty output means nothing is affected. I checked the query against the migration's test fixtures only. Neither the query nor the migration has run on a live cluster. #4287 also adds a migration 59. If it merges first, this one moves to 60: the file, the version it stamps, `migrations.targetVersion`, the bats file (its `run_migration` argument and expected `STAMP`) and `hack/testdata/migration-59-vmi-hotplug`. A VM with a pending hotplug request at upgrade time may also get stuck. virt-controller still processes `VM.status.volumeRequests` before the declarative handler, and it applies them through the VMI subresource, which virt-api rejects once the old gate is off. The sync then fails before the VM spec is updated, so nothing clears the request, and every later sync of that VM fails the same way. A retry through the VM subresource edits the spec and clears it, which covers kubevirt-csi's own requests. A one-shot request stays stuck until the VM restarts. I read this from the v1.9.0 code and haven't reproduced it. Waiting until this lists nothing before upgrading narrows the window, but a request made during the rollout can still hit it: ```bash kubectl get vm --all-namespaces --output json | jq --raw-output '.items[] | select((.status.volumeRequests // []) | length > 0) | .metadata.namespace + "/" + .metadata.name' ``` The two halves live in different HelmReleases, so there is a short window during the rollout where the driver and the gate disagree. In that window an unpublish fails and is retried until both are updated. A tenant cluster whose `kubernetes` HelmRelease is suspended or failing keeps its old driver for longer. Drivers from before July 2025 attach through the VMI subresource, so on such a tenant every attach is refused until its release reconciles. Such a driver can also attach a volume after the migration has run and before the gate flips. The migration doesn't see that volume, and the first declarative reconcile unplugs it from the running VM. The migration lists the VMs once and patches each one with a `resourceVersion` test, so a VM that changes in between fails the hook Job. The Job has `backoffLimit: 3`, and each retry lists again and skips the VMs already patched. Re-reading only the conflicting VM would avoid the retry; I left that out. The new gate is listed in the CR even though it is on by default. With the old gate gone it is the only hotplug path, and the chart refuses a render that disables it. I found no other user of `HotplugVolumes` in the platform or in the downstream repositories. The VMI-level fallback may have been failing already. The kcsi Role has no rule for the VMI-level `removevolume` (#4452), so that call likely got 403 with or without the gate. I haven't checked that on a cluster. `hack/migration-59-vmi-hotplug-volumes.bats` runs the migration against a fake kubectl: a VM that needs the copy, VMs and VMIs that must be left alone (a VMI that is not Running among them), a second run, a cluster without KubeVirt and the fail-closed paths. The helm-unittests for the KubeVirt CR pin the whole gate list, accept `HotplugVolumes` in `disabledFeatureGates` and refuse `DeclarativeHotplugVolumes` there. The CSI test pins the flag at false, and the `make update` idempotency test still passes. None of that exercises hotplug itself. The real test is e2e with volume attach and detach on a tenant cluster, including a teardown. No CI lane upgrades from the previous release yet, so an upgrade with a live VMI-only volume is untested; #4463 tracks that test. ### Screenshots No UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(kubevirt)!: KubeVirt now runs with DeclarativeHotplugVolumes instead of the deprecated HotplugVolumes feature gate, and kubevirt-csi no longer uses the VMI-level hot-unplug. Volume hotplug requests are applied through VM.spec. The upgrade copies volumes that older kubevirt-csi versions attached only to the VMI into VM.spec, so they stay attached; the check in the PR description is optional. This also applies to ephemeral volumes added to running user VMs at the VMI level, such as with virtctl addvolume without --persist: they become part of VM.spec and attach again after a VM restart. virt-api now refuses VMI-level addvolume and removevolume on a VMI owned by a VM, so such volumes are added and removed through the VM. A tenant cluster whose kubernetes release is suspended or failing keeps its old kubevirt-csi, and a driver from before July 2025 cannot attach volumes there until that release reconciles, and a volume it attaches during the upgrade itself can be unplugged again. A values override that puts DeclarativeHotplugVolumes into disabledFeatureGates now fails the kubevirt render. Clusters on the default variant do not run platform migrations and should run that check before upgrading. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Declarative hotplug volumes are enabled by default for KubeVirt. * Running virtual machines keep eligible hotplugged volumes and disks when their configuration is migrated. * **Bug Fixes** * The migration avoids adding duplicate volumes or disks and does not mark the migration complete if required operations fail. * The Kubernetes CSI driver no longer uses the VMI hotplug fallback. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Alexey Artamonov
|
e63b9e439c |
fix(monitoring): count a central request as the receiver admitted it
The limiter refuses for good any request it counts above burst, and burst was the receiver's 4 MiB cap. A request grows on its way to the limiter: the sampler adds a tracestate to every span it keeps, and the limiter counts a request as the collector re-encodes it, which writes the empty value of every attribute the wire may omit, so a valid request of spans with empty-valued attributes is counted 1.4x. A request the receiver admitted near its cap was therefore refused on every retry. The limiter now runs right after memory_limiter, so it counts the request before sampling. The receiver caps a request at 3 MiB and burst stays at 5 MiB, which holds 1.4x the cap; a larger burst would also be what each pod start lets through above the rate. The rate is counted before sampling, so the store keeps only the sampled share of it. The texts say that a request above the cap gets a 400, which senders do not retry, and that each collector rollout a tenant causes lets that burst through again on every pod. The replica bound that keeps that allowance small now applies only to a central tenant's collector, whose render fails above ten replicas: a collector writing to the tenant's own store has no rate, and the replica counts it shipped with stay valid. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
3497855e15 |
fix(platform): read the tracing rate only as plain decimal digits
Sprig's int64 reads a string with a leading zero as octal and turns a parse error into 0, so "0100" would reach the collectors as 64, and "08" or digits beyond int64 would leave the default in place without a word. A float beyond int64 converts differently on each CPU architecture, and the collector adds its replica count to the rate before splitting it. A string rate must now be plain decimal digits, and any rate above 1 TiB/s fails the render; the collector also falls back to the default on digits it cannot hold rather than start with a rate of zero, which the processor refuses. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
a0aea139fc |
fix(platform): refuse a malformed shared-central tracing rate
A rate written as a quantity or a fraction ("1Mi", "100KiB", 1.5) was
read as zero, so the platform wrote no key and every collector kept
the default without a word. The platform render now fails on anything
but a whole number of bytes per second. Helm reads a number from
values as a float64, which prints a million as 1e+06, so a whole
number is checked as a number and written as int64 digits.
Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io>
|
||
|
Alexey Artamonov
|
fc0db49187 |
fix(monitoring): bound what a central tenant writes above its rate
Each collector pod starts with a full token bucket, and burst was at least 64 MiB, the largest request vtinsert accepts. A tenant controls when its collector pods start, through any Monitoring change or by deleting them, and how many there are, so it could write tens of mebibytes above its rate per pod start and gigabytes per rollout of many replicas, which the two-day bound does not survive. The limiter only sees requests the receiver admits, so in central mode the receiver now caps them at 4 MiB, decompressed for HTTP, and burst drops to that floor; a pod start lets at most 4 MiB through above the rate. The replica count is capped at 10. The texts now say what the default rate guarantees: one tenant writes at most a default store's disk cap over two days counted uncompressed, rather than that it cannot fill it, and they name the per-pod-start allowance and that a sender pinned to one replica gets that replica's share. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
f8deb8e171 |
fix(platform): write the tracing rate only when it is positive
apps.yaml wrote the rate for any non-zero value, so a negative one reached every tenant's cozystack-values Secret and upgraded every release in every tenant, while the collectors ignored it and kept the default. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
177b207a27 |
feat(monitoring): hold each shared-central tenant to a write rate
The design has the per-tenant collector rate-limit its tenant, so that a noisy or hostile tenant cannot exhaust a shared backend. The disk cap alone does not do that: VictoriaTraces always keeps the last two days, so a tenant writing faster than the cap allows over two days fills the disk for every tenant on the store. The platform sets the rate with monitoring.tracingCentralTenantBytesPerSecond, and it reaches every tenant in _cluster through the cozystack-values Secret. A change there is a change in the values each monitoring HelmRelease reads, so Flux upgrades them all; a rate read with lookup at render time would never reach a tenant whose release is already in sync. The platform writes the key only when it is set, since every release in every tenant reads that Secret. Without it the collector holds the tenant to the rate of a default 10Gi store. Each central tenant's collector splits the rate across its replicas and refuses data above it before the batch processor, so the sender sees the refusal. An OTLP/HTTP sender gets a 429 and retries; the limiter answers gRPC with RESOURCE_EXHAUSTED and no RetryInfo, which the OTLP specification makes final, so central tenants should export over HTTP. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Aleksei Sviridkin
|
7bf6906a80 |
fix(platform): keep the legacy etcd-operator stopped after etcd adoption (#4738)
## What this PR does Migration 50 scales the legacy etcd-operator to 0, adopts every legacy `etcd.aenix.io` cluster with `etcd-migrate`, and then scales the operator back to 1. At that point the Deployment still runs the legacy operator, and after a successful adoption it has nothing left to manage. Bringing it back undoes part of the adoption. Observed on a production cluster upgraded from 1.4.3 to 1.6.4. The API audit log and the Helm history of a tenant's `etcd` release show this sequence, in UTC on the same day. - 13:21:12 migration 50 scales `cozy-etcd-operator/etcd-operator-controller-manager` to 0. - 13:22:59 `etcd-migrate` updates `etcd-headless`, pointing its owner references at the adopted EtcdMembers, and orphan-deletes the legacy EtcdCluster and StatefulSet. - 13:23:04 migration 50 scales the operator back to 1. It is still the legacy operator, the v1alpha2 one replaced it only at 13:40. - 13:23:42 Flux upgrades the tenant's `etcd` release with the old chart (Helm revision 87), because the new chart artifact appeared only at 13:24:40. The old chart re-creates the legacy EtcdCluster at 13:23:43. - 13:23:43 to 13:23:45 the legacy operator reconciles it, updates `etcd-headless` twice and re-creates the legacy StatefulSet `etcd`. - 13:36:49 Flux upgrades the release to the new chart (revision 88), which prunes the legacy EtcdCluster. - 13:36:50 the garbage collector deletes `etcd-headless` and the re-created StatefulSet. The same happened in all five tenants that run an etcd. The pods survived because EtcdMembers own them, but they keep `spec.subdomain: etcd-headless`, so their `etcd-<i>.etcd-headless.<ns>.svc` names stopped resolving. From then on every member logged `no such host` for its peers, the v1alpha2 EtcdCluster had no status conditions, and the `etcd-defrag` CronJob failed every hour with `context deadline exceeded`. The transitional `etcd-headless` Service the etcd chart ships for this window (#3270) does not cover it. Helm patched the existing Service 202 ms before the garbage collector removed it, and did not create it again because it was already part of the release. With this change the operator stays at 0 after a successful adoption. The etcd-operator HelmRelease replaces the Deployment with the v1alpha2 operator later in the same upgrade, and no later migration waits for the operator. A failed or interrupted adoption still restores it to 1 through the existing EXIT trap, so a failed run does not leave the tenant etcds without an operator. If that HelmRelease cannot reconcile, the adopted clusters wait for it with or without this change, because the legacy operator does not reconcile v1alpha2 EtcdClusters. Clusters already upgraded with this bug can be repaired without restarting anything. Creating the Service from the tenant's own `etcd` release is enough. ``` helm -n <ns> get manifest etcd | awk 'BEGIN{RS="\n---\n"} /\nkind: Service\n/ && /\n name: etcd-headless\n/' | kubectl -n <ns> create -f - ``` On the cluster above the v1alpha2 EtcdCluster reported `Available` with reason `QuorumHealthy` within 11 seconds of the Service being created, in every tenant, and the members stopped logging `no such host`. ### Validation - `hack/cozytest.sh hack/migration-50-etcd-adopt.bats` passes all 29 tests. A new test asserts that a successful adoption scales the operator to 0 and never back to 1. Against the current script it fails with `FAIL: the legacy operator was scaled back up after a successful adoption`. - The existing test for a failed adoption still passes, so the EXIT trap still restores the operator to 1. - The new test checks the absence with `if grep ...; then echo "FAIL: ..."; false; fi`, the form the other suites use. A bare `! grep` assertion cannot fail a test under `hack/cozytest.sh`, so it could not have caught this. The other negated assertions in this file had the same weakness, and #3790 has rewritten them on main. With all of them made able to fail in a scratch copy, the suite still passes against this change. ### Screenshots Not a UI change. ### Downstream repositories Walked the trigger map in `docs/agents/contributing.md` against the diff. It changes a migration script and its bats test. No package, values, schema, CRD, make target or `hack/` layout changes, so no entry matches. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(platform): keep the legacy etcd-operator stopped after migration 50 adopts the legacy etcd clusters. Scaling it back up let it reconcile the legacy EtcdCluster that Flux re-created from a not yet upgraded etcd chart, re-create the legacy StatefulSet and take the legacy etcd-headless Service away from the adopted members, which the garbage collector then deleted. The adopted members lost their DNS names, the EtcdCluster never reported a status and etcd defrag failed every hour. Clusters already upgraded can recreate the Service from the etcd release manifest. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Migration Updates** * After successful etcd adoption, the legacy operator remains scaled to zero replicas for replacement by the etcd operator; it is no longer scaled back up before the migration is stamped. * If adoption fails or exits before completion, the legacy operator is restored to one replica. * The dry-run message now describes the zero-replica outcome of successful adoption. * Successful adoption continues to record the migration version stamp. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
IvanHunters
|
50dec5d46a |
fix(platform): resume a retried migration Job from the stamped version (#4583)
## What this PR does A retried pod of the platform migration Job no longer runs migrations that already finished in the same upgrade. The Job gets `CURRENT_VERSION` once, at render time, and a failed pod is replaced by one with the same environment. By then every finished migration has stamped the `cozystack-version` ConfigMap, but the new pod ignored that and started from the rendered version again. `run-migrations.sh` now starts from the version stamped in the ConfigMap. If reading it fails, the pod fails and the Job retries it, because falling back to the rendered version is exactly the re-run this fixes. The rendered value is used only when the ConfigMap holds no integer version, which is also when the chart itself could not get a real version from it. Without that fallback a value like `v58` gave a green Job that ran nothing. The new `hack/run-migrations.bats` runs the script in the migrations image's alpine base against a fake kubectl that keeps the stamp in a file, so one pod's stamps are what the next pod reads. It needs docker, like the other migration suites. I also found that the ConfigMap existence check at the top of the script treats any API error as a missing ConfigMap and skips every pending migration. That is older than this change and is filed as #4579. Closes #4555 ### Screenshots ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(platform): a retried platform migration Job now resumes from the version stamped in the cozystack-version ConfigMap instead of re-running migrations that already finished in the same upgrade. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Bug Fixes** * Migration startup now resumes from a valid stamped version, avoiding reruns of migrations that have already completed. * Empty or non-numeric stamps fall back to the rendered version. Out-of-range stamps or failed stamp reads stop migrations before they run. * If the migration ConfigMap is missing, migrations do not run and the target version is stamped. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Yan Bondarenko
|
6248d458ad |
fix(platform): keep the legacy etcd-operator stopped after etcd adoption
Migration 50 scales the legacy etcd-operator to 0, adopts every legacy etcd.aenix.io cluster with etcd-migrate and then scales the operator back to 1. At that point it is still the legacy operator, and it has nothing left to manage. Until a tenant's etcd HelmRelease reconciles the new chart, Flux can upgrade it with the old one, which re-creates the legacy EtcdCluster that etcd-migrate just orphan-deleted. The legacy operator then reconciles it, re-creates the legacy StatefulSet and rewrites the legacy etcd-headless Service, dropping the owner references etcd-migrate pointed at the adopted EtcdMembers. When the new chart prunes the legacy EtcdCluster, the garbage collector deletes the Service with it, and the adopted members' etcd-<i>.etcd-headless names stop resolving. After a successful adoption the operator now stays at 0 until the etcd-operator HelmRelease replaces the Deployment with the v1alpha2 operator later in the same upgrade. A failed or interrupted adoption still restores it through the EXIT trap. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
Aleksei Sviridkin
|
3a07885b70 |
fix(platform): resume a retried migration Job from the stamped version
The migration hook Job gets CURRENT_VERSION once, at render time, and a failed pod is retried with that same environment. Each migration that finished has stamped the cozystack-version ConfigMap by then, yet the retry started from the rendered version and ran those migrations again. Migrations are written to run once, so a re-run is not safe in general. The runner now starts from the version stamped in the ConfigMap. A failed read aborts the pod, since falling back would bring the re-run back and the Job retries anyway. The rendered value is kept only when the ConfigMap holds no integer version, which is also the case where the chart could not derive a real one from it. An all-digit stamp past the shell's integer range aborts too: its comparison fails inside an if, out of reach of set -e, and the Job would go green having run nothing, while the chart renders that stamp as 0. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
IvanHunters
|
339be8d42d |
fix(vm-default-images,kubernetes-worker-image,vm-disk): wait for golden images to import and refuse cloning a failed one (#4392)
## What this PR does Both golden image catalogs, `vm-default-images` and `kubernetes-worker-image`, went Ready before any image had imported. Each one renders a DataVolume per image with immediate bind, so every import starts at install, but neither PackageSource had `healthCheckExprs`. The HelmRelease went Ready as soon as helm applied the DataVolumes, and an image that failed or stalled stayed green. This PR makes both releases wait for the imports. Each component's `install:` block now has a DataVolume health check. `current` holds only on `Succeeded`, and `failed` holds on `Failed`. Any other phase, `Unknown` included, matches neither, and flux keeps waiting. A DataVolume with no `status` key makes the CEL evaluation error out. Flux reports that as Unknown and keeps waiting too. The other settled phases are safe to treat as not ready for these charts. `PendingPopulation` and `WaitForFirstConsumer` are where a volume waits for a consumer, and immediate bind removes that wait. `UploadReady` and `Paused` belong to upload and multi-stage sources, and both charts render only `source.http`. There is no per-component timeout, so I did not set one. The window is the operator-wide `--helmrelease-install-timeout`, 10m by default. The operator sets `RetryOnFailure` on both install and upgrade, so a download that outlasts the window is retried as an upgrade until the import finishes. Nothing uninstalls the DataVolumes in between, and the import keeps running. One image that never imports keeps its whole catalog not Ready until the image imports or its entry is removed. There is no time limit, and I kept it that way on purpose. A group/kind health check cannot tell one image from another, so it cannot be made per image. A per-component timeout would be an API change for one opt-in package. Both charts' `values.yaml` document this. Nothing on `main` lists either package in `dependsOn`, and the images that did import stay usable in the meantime. Tenant worker pools look up each golden directly and never wait on the catalog's status. The price is a helm-controller slot. The operator labels the generated HelmRelease with `cozystack.io/package`, plus `cozystack.io/privileged` when privileged. The flux-shard-operator acts only on HelmReleases that already carry `sharding.fluxcd.io/key`. So both catalogs go to the system helm-controller, which picks up releases without that key and runs with `--concurrent=5`. A DataVolume in `Failed` ends each attempt at once and costs next to nothing. An import that stalls without reaching `Failed` is the expensive case, for example an importer that keeps retrying an unreachable URL. Each attempt waits out the full window, and the next one starts 30s later. So one of those five slots stays busy about 95% of the time for as long as the image is stuck. #4145 describes the same cost on the shard controllers. The status change alone does not protect a vm-disk, because vm-disk clones from a golden without checking it. A golden still importing is fine, since CDI holds the clone until the source is populated. A golden whose import has Failed is never populated, so the clone would wait forever. vm-disk now refuses to render a new disk on a Failed golden and names the image. This matches the check the worker pools already have. A disk that already exists is exempt, so a golden that fails later does not break that disk's upgrades. The check fires only when CDI sets Failed, and at CDI v1.66.1 an import reaches Failed only on a checksum mismatch. The goldens carry no checksum, so a broken URL keeps the importer retrying and the new disk still waits, with only the catalog's not-Ready status pointing at the image. #4564 tracks that gap. A golden that does not exist at all is a separate gap, tracked in #4548. Tests pin the expressions for both catalogs. A helm-unittest case checks them on the rendered PackageSource. A Go test builds the HelmRelease spec from the shipped file and checks that they arrive with the poller wait strategy. The repo has no harness that evaluates flux CEL, so the phase behaviour above is argued from flux's evaluator and not exercised by a test. The vm-disk check has helm-unittest cases for a Failed, a Succeeded, and a still-importing golden, for a render with no cluster, and for an existing disk. Closes #4169 ### Screenshots <!-- REQUIRED for UI changes: attach screenshots or screen recordings demonstrating the visual impact of your changes. PRs with UI changes without screenshots will not be merged. --> No UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(vm-default-images, kubernetes-worker-image): the golden image catalogs now report Ready only after their images have finished importing, and a failed or stalled import keeps the catalog not Ready. A vm-disk created from a golden image whose DataVolume is in phase Failed is now refused with an error naming the image, instead of waiting forever on a clone that cannot complete. ``` |
||
|
Aleksei Sviridkin
|
de570a3806 |
feat(platform): add slim installation variants (#4595)
## What this PR does This adds three minimal platform variants for small installs, such as arm64 labs, where isp-full is too heavy. They are `isp-slim` for Talos, `isp-slim-generic` for k3s, kubeadm or RKE2, and `isp-hosted-slim` for clusters where the host provides CNI and storage. A slim variant installs only the base platform: the engine, API and dashboard, tenants, ingress and Gateway API. The two non-hosted variants also get LINSTOR. objectstorage-controller stays on too, because cozystack-controller watches BucketClaim unconditionally and crash-loops without that CRD. Everything else is opt-in through `bundles.enabledPackages`, including every paas and naas application and its operator, monitoring, backups, etcd, SeaweedFS, metrics-server, VPA, Multus and MetalLB. The iaas bundle is refused, so there are no VMs and no managed Kubernetes. With the stock preset a slim variant emits 20 Packages (15 for hosted), where isp-full emits 77. On the two non-hosted slim variants, networking is Cilium alone. Without VMs nothing needs Kube-OVN, and Cilium L2 announcements take the place of MetalLB. The admin creates a `CiliumLoadBalancerIPPool` and a `CiliumL2AnnouncementPolicy`, or uses `publishing.externalIPs`. Pod ranges come from `node.spec.podCIDR`, which Talos and k3s allocate by default. `networking.encryption` only drives Kube-OVN IPsec, so the slim variants refuse it instead of silently ignoring it. The tenant application needs its own slim variant. The default one waits on the monitoring, etcd and SeaweedFS applications, so on slim cozystack-basics and tenant-root would never become ready. tenant-rd and cozystack-basics still reference the default variant's artifacts by name. Those artifacts exist anyway, because the PackageSource builds them for every variant. The full variants don't change. I rendered isp-full, isp-full-generic and isp-hosted against main and got byte-identical Packages. The only new output there is the slim variant in the tenant-application PackageSource. Things to know before using it: - An opt-in package does not pull in its dependencies. The presets and the docs list the chains. A package enabled without its chain stays `DependenciesNotReady`. - Slim is for new installs. Switching a live isp-full cluster to isp-slim moves the networking Package from `kubeovn-cilium` to `cilium`, the operator removes the Kube-OVN release, and running pods lose networking. The other Packages are kept by `helm.sh/resource-policy: keep`, so the switch doesn't make the cluster smaller either. - No e2e suite runs a slim variant yet. Helm unit tests cover the presets, opt-in, OIDC, the networking values and both refusals, and a dependency check over every emitted Package passes for all three presets. I installed isp-slim from a build of this branch on a fresh three-node Talos 1.13 cluster (amd64). All Packages and HelmReleases went Ready, with no Kube-OVN, MetalLB, monitoring, backup or KubeVirt pods. From outside, the dashboard and the API answered by name with valid certificates. A LoadBalancer Service got an address from a Cilium pool and answered through L2 announcements. Pod-to-pod traffic across nodes, cluster DNS and a replicated LINSTOR volume worked. Opting in postgres-operator and postgres-application gave a Ready Postgres. That run found the BucketClaim crash-loop above, which is fixed here. The base platform used about 215m CPU and 3.2 GiB of memory, not counting the Kubernetes control plane. ### Screenshots Not a UI change. ### Downstream repositories - [ ] No downstream repository is affected by this change - [x] [cozystack/website](https://github.com/cozystack/website) - follow-up: cozystack/website#718 - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [x] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: cozystack/ansible-cozystack#79 - [x] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: cozystack/ccp#23 - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(platform): add the isp-slim, isp-slim-generic and isp-hosted-slim variants. They install only the base platform (engine, dashboard, tenants, ingress, gateway, and LINSTOR outside hosted) with Cilium-only networking and no MetalLB; applications, operators, monitoring, backups, etcd and SeaweedFS are opt-in through bundles.enabledPackages, and the iaas bundle is not available. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added the `isp-slim`, `isp-slim-generic`, and `isp-hosted-slim` platform variants, with support for PaaS and NaaS bundles. * Slim variants use Cilium networking and include a reduced set of packages by default. Additional packages and their dependencies can be enabled as needed. * **Limitations** * IaaS and the platform encryption toggle are not supported on slim variants. Cilium-native encryption is not configured. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Aleksei Sviridkin
|
d463e00da1 |
feat(platform): add publishing.serviceDomain for the dashboard Services tab
The dashboard has no way to show a connection hostname for a LoadBalancer Service: before 1.4.0 the old UI composed one from the Service name and the cluster's root host, and operators whose DNS publishes LoadBalancer IPs under a dedicated zone still need that. Add the suffix as a platform value and propagate it into the cozystack-values map as service-domain, next to cluster-domain and branding, so the dashboard chart can read it. The value is display-only and opt-in: empty (the default) means the console shows no hostname, because nothing in the platform publishes DNS for a guessed name. Leading and trailing dots are stripped here, the one place every consumer reads from, so an operator's ".svc.example.org." cannot render as "demo..svc.example.org."; the value is coerced to a string first because an unquoted numeric scalar would otherwise abort the whole platform render. The helm-unittest suite pins the empty default, a configured value landing in the Secret, the dot trimming and the numeric case. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
Aleksei Sviridkin
|
506dc7a4a7 |
feat(platform): add isp-slim, isp-slim-generic and isp-hosted-slim variants
Small installs such as arm64 labs had to take the whole isp-full set: KubeVirt, backups, monitoring, etcd, SeaweedFS and every paas/naas operator. The slim variants keep only the engine, tenants, ingress, gateway, LINSTOR storage and networking, and turn everything else into opt-in packages listed in bundles.enabledPackages. Full variants render the same Packages as before. Networking on isp-slim and isp-slim-generic is Cilium alone: without VMs nothing needs KubeOVN, and Cilium L2 announcements take the place of MetalLB, which stays available as an opt-in package. KubeOVN IPsec is what networking.encryption drives, so the slim variants refuse it rather than ignore it. isp-hosted-slim keeps the noop datapath. tenant-application gains a slim variant whose dependsOn drops the monitoring, etcd and seaweedfs applications; the default variant waits on them, which would leave cozystack-basics and tenant-root never Ready. The iaas bundle stays limited to the isp-full variants. objectstorage-controller stays on everywhere: cozystack-controller watches BucketClaim unconditionally, so without that CRD its manager never syncs its caches and crash-loops. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
Myasnikov Daniil
|
b8bc0dfd5f |
fix(platform): make mongodb-application depend on its operator
The mongodb chart renders kind: PerconaServerMongoDB from psmdb.percona.com/v1, but cozystack.mongodb-application depended only on networking and cozystack-engine. So mongodb-rd registers the ApplicationDefinition as soon as the engine is up, and a tenant can create a MongoDB before the operator exists; its HelmRelease then fails with no matches for kind "PerconaServerMongoDB". This is the same defect #3817 fixed for etcd. Every other operator-backed app here already carries the edge. It also closes a test-selection gap: without it cozystack.mongodb-operator reaches no runnable suite, so every change to the operator escalates to a run of all suites instead of selecting mongodb. select-install.sh --validate reports the graph still has no cycle. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
Aleksei Sviridkin
|
a09eded9ec |
fix(kubernetes-worker-image): wait for goldens to import before Ready
The Talos worker image catalog renders its goldens the same way the VM image collection does: DataVolumes with immediate bind whose import starts at install. With no health check the release went Ready as soon as helm applied them, so a golden that never imported left the catalog green. Gate it on the DataVolume phase with the same expressions. Worker pools read each golden directly and do not wait on the catalog status, so the gate changes what the status reports and delays no pool. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
Aleksei Sviridkin
|
51ac18776e |
fix(vm-default-images): wait for golden images to import before Ready
Every image is a DataVolume with immediate bind, so its import starts at install, but nothing waited for it: the HelmRelease went Ready as soon as helm applied the DataVolumes. An image that failed or stalled left the component green, and the failure surfaced later on a vm-disk cloning from it, far from the cause. Gate the release on the DataVolume phase. Only Succeeded counts as ready, and a Failed phase, when CDI sets one, ends the wait at once. Every other phase, and a missing status, keeps the wait open until the install window expires. There is no per-component timeout, so a download longer than that window is retried as an upgrade until it finishes, and the retry strategy never uninstalls the volumes. Signed-off-by: Aleksei Sviridkin <f@lex.la> Assisted-by: LLM |
||
|
Marian Koreniuk
|
93c89c8bf6 |
feat(kubernetes): add the Proxmox CSI driver, with its controller in this cluster
Tenant clusters on the proxmox substrate get persistent volumes backed by the
hypervisor's storage. The driver is sergelogvinov/proxmox-csi-plugin, vendored
as a chart that reproduces byte-for-byte from `helm pull`.
It is deployed in halves, and which half goes where is the whole design. The
controller authenticates to Proxmox, so it runs HERE, in the tenant's namespace
of the management cluster, and drives the tenant over its admin kubeconfig —
the same shape templates/csi/deploy.yaml already uses for kubevirt-csi. The
tenant gets the node plugin, the CSIDriver object and the storage classes; its
DaemonSet mounts no credentials.
Putting the controller in the tenant would hand the token to the tenant. The
resource definition lists the admin kubeconfig in secrets.include, so the
tenant is cluster-admin of its own cluster and can read any Secret there, and
the chart writes the driver's config.yaml — token included — wherever it is
installed. The privileges the driver documents are granted on `/`, so that
token reaches every VM and every volume on the Proxmox cluster, not just this
tenant's.
Three consequences of the split are handled here rather than discovered later:
- The vendored chart has no switch for its controller, so the tenant release
sets replicaCount: 0. The Deployment object still renders; no Pod does.
- Its Secret template is gated on a non-empty config.clusters, so an empty
list is what keeps the credential out.
- CSIStorageCapacity is published by the provisioner sidecar, which now runs
here and owns those objects through a Pod that does not exist in the
tenant. Left on, CSIDriver.storageCapacity=true and the scheduler refuses
every Pod with "node(s) did not have enough free storage". The chart
hardcodes that field, so a kustomize postRenderer patches it rather than
forking the chart.
The controller follows proxmox.csi.enabled, like the tenant release: with the
driver switched off there is nothing for it to serve and no token to hold.
Volumes are owned per tenant. The driver names them vm-<controllerVmID>-pvc-…
and defaults the id to 9999; on shared storage that made every tenant's volumes
indistinguishable to an operator and to a VM-level ACL. Each cluster derives its
own from its release name.
What this does not do is make one tenant unable to reach another's volumes: a
tenant can still create a static PV naming a foreign volumeHandle. That needs a
per-tenant Proxmox scope — a dedicated storage and a VM ACL per tenant — which
is a deployment requirement rather than a chart change.
Signed-off-by: Marian Koreniuk <moriarti@cp.if.ua>
Assisted-by: LLM
|
||
|
Aleksei Sviridkin
|
fd8ccb2fcb |
feat(platform): keep VMI-only hotplugged volumes across declarative hotplug
Dropping the HotplugVolumes gate lets virt-controller rebuild each running VMI's hotplug volumes from VM.spec, and it removes every hotpluggable VMI volume the VM spec does not list. kubevirt-csi attached tenant volumes at the VMI level until mid-2025 and live migration carries such a VMI across KubeVirt updates, so a tenant node that was never recreated can still hold a mounted disk only its VMI knows about; the first reconcile after the upgrade would unplug it. Migration 59 writes each such volume and its disk into the VM template as they are on the VMI, before the upgrade re-points cozystack-packages and so before the KubeVirt CR and the kubevirt-csi flag change. Hotplug volume changes are a valid live update, so no VM needs a restart. An ephemeral hotplug a user made at the VMI level, such as virtctl addvolume without --persist, has the same shape, because virt-api gives every VMI-level addvolume that shape. It is copied too and becomes permanent: leaving it out would not keep it ephemeral, since the first reconcile would unplug it. Only Running VMIs are considered, matching virt-controller, which reconciles no other; a stopped VM's next start builds its VMI from the VM spec, so its VMI-only volumes are not resurrected. Only the variants with migrations enabled run it. The default variant renders no migration hook, so a cluster there that installed KubeVirt by hand has to check for such volumes itself before upgrading. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
IvanHunters
|
30782d003c |
fix(platform): attach cozy-lib to the bucket-system package source
system/bucket now calls cozy-lib.ns-host-required, but in a cluster the chart is built from the ExternalArtifact per its PackageSource, not from the charts/cozy-lib symlink used by helm and helm-unittest. The bucket-system component did not list cozy-lib, so the built chart lacked the helper and every cozy-bucket install (including the platform backups bucket) failed to render. Attach the library to the component, as the apps/bucket component already does. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
Aleksei Sviridkin
|
2c2c0301f7 |
chore(deps): roll up pending Renovate updates and move to Go 1.27.1 (#4447)
## What this PR does This replaces the open Renovate PRs with one rollup. Go modules move to their newest releases that keep the Kubernetes libraries and controller-runtime where they are, the toolchain and builder images move to Go 1.27.1, and the first-party code gets the Go 1.27 modernizers. Tests for the code the bumps touch come first, in their own commits, and pass on both the old and the new dependencies. Before the bumps: - The e2e sandbox image builds again: dl.min.io answers 410 for mc since MinIO archived it, so mc now comes from its last GitHub release with a pinned checksum. - Renovate stops offering tags of the apimachinery fork. They mirror upstream, so #2999 is a downgrade that drops our patch. - `make unit-tests` now runs the tests of the nested Go modules (kubevirt-csi-driver, token-proxy, kubeovn-webhook, api/apps/v1alpha1). They never ran in CI before. - New tests: JWT verification in the dashboard token proxy, the kube-ovn plunger metrics, cert-manager object idempotency in the tenant gateway, values-file layering in the operator, and the kubevirt CSI driver wrapper. - One real fix. The lineage webhook decoded admitted objects with encoding/json, so an int64 above 2^53 came back rounded. jsonpatch v2.5 compares numbers exactly and would emit a replace that rewrites such a field in the pod. The webhook now decodes with apimachinery's json. Held back on purpose, with the reasons in the commit messages: - Kubernetes libraries stay on v0.35. #3001 needs the apimachinery fork rebased onto release-1.37 first. - cel-go v0.29.2 and etcd v3.6.15, the lines k8s.io/apiserver v0.35 is built and tested with. - grpc v1.83.2. v1.84.0 is affected by GO-2026-6443 and no v1.84 patch release carries the fix yet. - kubevirt.io/api and the CDI API stay on what upstream csi-driver builds against. From CDI v1.60 it no longer compiles. - api/apps/v1alpha1 keeps go 1.26.4, so consumers of the published types are not forced onto Go 1.27. - go fix runs without embedlit (Go 1.27-only syntax, breaks backports to release branches on Go 1.26) and omitzero (would make metadata, spec and status required in the published OpenAPI schemas), and one errorsastype rewrite that did not compile is left out. govulncheck reports nothing reachable in any of the five modules, standard library included. Supersedes #4311, #4310, #4309, #3452, #3993, #3927, #3902, #3805, #3451, #3415, #3414, #3413, #3302, #4050 and #3363. #3001 stays open. Not checked locally: the images that build upstream projects (kube-ovn, kamaji, cilium, linstor-csi and others) with the Go 1.27 builder. The image build jobs of this PR cover them. Closes #4487. ### Screenshots No UI changes. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note chore(deps): move the toolchain and builder images to Go 1.27.1 and raise Go dependencies to their latest compatible releases, closing the published advisories; the lineage webhook no longer rewrites int64 fields above 2^53 in admitted objects. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added a restore resource policy option for Velero strategies. * Added a test target to run Go tests across tracked modules. * **Bug Fixes** * Updated the end-to-end test environment to download and verify the MinIO client from its current release location. * Added coverage for token validation, webhook patching, controller behavior, and reconciliation. * **Maintenance** * Updated the Go toolchain, dependencies, and container image versions. * Refreshed pinned workflow actions and base image digests. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Marian Koreniuk
|
18b83a72b3 |
feat(platform): make the Proxmox substrate installable from a bundle
Until now the two Cluster API packages behind the Proxmox substrate existed but no bundle emitted them, so a Cozystack install shipped neither and the substrate was reachable only by applying Package CRs by hand. They join the iaas bundle as opt-in packages, where the KubeVirt infrastructure provider is unconditional. The asymmetry is the point: capmox drives a hypervisor outside this cluster and needs a Secret holding a Proxmox API token, which capi-operator reads before it installs anything — with no Secret the provider is never deployed at all. Enabling it by default would ask every Cozystack install that has no Proxmox to supply hypervisor credentials. Enabling capmox brings the in-cluster IPAM provider with it — capmox allocates worker addresses from an InClusterIPPool and has no DHCP mode, so on its own it never gets a ProxmoxCluster to Ready. IPAM stays independently enableable, since assigning addresses is a generic Cluster API concern rather than a Proxmox one. Naming capmox in enabledPackages while disabling IPAM stops the render. The cluster would catch that combination on its own: the capmox PackageSource depends on the IPAM Package, so with that Package absent capmox goes Ready=False with DependenciesNotReady and no HelmRelease is ever created. What it would not do is say why. Failing the render names the two conflicting list entries at the moment someone writes them, instead of leaving a condition to decode later. The negated containsDocument asserts in the wiring suite carry `any: true`. Without it a negated containsDocument passes whether the document is in the render or not, so the two properties the suite exists for — off by default, and disabledPackages winning — could not fail. Signed-off-by: Marian Koreniuk <moriarti@cp.if.ua> Assisted-by: LLM |
||
|
Marian Koreniuk
|
67db200530 |
feat(cluster-api): add Proxmox infrastructure provider package
Packages ionos-cloud/cluster-api-provider-proxmox (capmox) the same way capi-providers-infraprovider packages CAPK: vendored components gzipped into a ConfigMap, an InfrastructureProvider that fetches them by label. Two details differ from the KubeVirt package on purpose. The fetchConfig label is `infraprovider-provider: proxmox`, not the shared `infraprovider-components: cozy`. A shared label would put both providers in one match. capi-operator would still install the right one — it keys every matched ConfigMap by its name as the version and takes the one equal to spec.version — but it builds that repository in a single pass and returns an error for the whole list as soon as one match is malformed: a name that does not parse as semver, or missing metadata. Sharing the label would let a broken ConfigMap belonging to one provider stop the other from being installed. The bootstrap packages already separate on a `bootstrap-provider` key; this follows that. components.gz is produced with `gzip -n`. Without it the header carries a timestamp, so regenerating from identical input yields a different blob and the committed artifact appears to change when nothing has. `make components` records the version pin, the source URLs and the flag, so refreshing the vendored manifests is reproducible rather than remembered. It also checks both downloads against the SHA-256 sums recorded in the Makefile before packaging them: a release tag is mutable, so the pin is on the bytes, and bumping CAPMOX_VERSION means recording the new sums next to it. Pinned to the v0.7 series: from v0.8 capmox declares the v1beta2 Cluster API contract, while capi-providers-core here is v1.10.1, which serves v1beta1. The package source depends on the in-cluster IPAM provider and deliberately not on cozystack.kubevirt: the KubeVirt provider needs it because its VMs run inside this cluster, whereas a Proxmox hypervisor is external and reached over its API with the credentials named by `credentialsSecretName`. That Secret is a precondition rather than an optional extra, and the chart does not create it — a hypervisor token belongs to the platform's secret management, not to a Helm release. capi-operator reads the Secret before it installs the provider, so while it is missing nothing is deployed at all. values.yaml carries what an operator needs at that point: that PROXMOX_URL is the bare https://<host>:8006 — capmox appends /api2/json itself, and a URL that already carries it sends every call to /api2/json/api2/json/... and gets 501 back — the full user@realm!tokenid form of PROXMOX_TOKEN, and the fact that a rotated token reaches the manager only after the next provider reconcile and a restart of its pod. Both edges are asserted in tests/sources_capi_provider_proxmox_test.yaml; losing the IPAM edge reproduces a failure mode whose symptom points nowhere near its cause. Signed-off-by: Marian Koreniuk <moriarti@cp.if.ua> Assisted-by: LLM |
||
|
Marian Koreniuk
|
86834d30a9 |
feat(cluster-api): add in-cluster IPAM provider package
Cluster API ships address management as a separate provider, and Cozystack
has never needed one: KubeVirt workers lease their addresses from the
cluster network's DHCP. An infrastructure provider that allocates addresses
instead of leasing them cannot work without it.
capmox is such a provider. It builds an InClusterIPPool out of
ProxmoxCluster.spec.ipv4Config and hands every VM a static address from it.
With no IPAM provider installed, the pool kind does not resolve:
Reconciler error: no matches for kind "InClusterIPPool"
in version "ipam.cluster.x-k8s.io/v1alpha2"
ProxmoxCluster then never reaches Ready and every ProxmoxMachine sits in
WaitingForClusterInfrastructure indefinitely — indistinguishable, from the
outside, from a provider that is simply broken.
Pinned to the v1.0 series rather than v1.1.0: both serve InClusterIPPool
v1alpha2, but v1.0 declares the v1beta1 contract that matches
capi-providers-core v1.10.1.
`make components` checks both downloads against the SHA-256 sums recorded
in the Makefile before packaging them. A release tag is mutable, so the pin
is on the bytes rather than on the tag; bumping CAIP_VERSION means recording
the new sums next to it.
The package carries no edge to any infrastructure provider. The dependency
belongs on the consumer's side, which keeps this reusable for any future
provider with the same requirement.
Signed-off-by: Marian Koreniuk <moriarti@cp.if.ua>
Assisted-by: LLM
|
||
|
renovate[bot]
|
a7dfbe6f8c |
chore(deps): update container image & action digests
Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
myasnikovdaniil
|
9bec21461d |
feat(kubernetes): boot tenant worker disks from a shared golden Talos image (CDI clone) (#4171)
## What this PR does Tenant worker boots from talos OS disk image that CDI streams over HTTP from image factory, and it does that once per worker. Same bytes N times, and N chances for a fetch to fail. In closed or rate-limited environment that is wrong shape. This PR adds opt-in catalog and per-pool selector that reads from it. `packages/system/kubernetes-worker-image` imports one golden DataVolume into `cozy-public` per `(schematicID, version)`, named `talos-worker-<schematicID>-<version>`. Pool opts in with `osImage.builtin` on its own `KubernetesNodes`, and its `disk-system` DataVolume then carries `source.pvc` pointing at that golden, so CDI does storage layer CSI clone instead of HTTP import. One import per flavor, shared by every worker of every tenant. Catalog is disabled by default, enable by adding `cozystack.kubernetes-worker-image` to `bundles.enabledPackages`. Its knobs (`imageFactoryURL`, `storageClass`, `storage`, `images`) are set through `spec.components.platform.values.kubernetesWorkerImage` on cozystack-platform Package. That needed optional package helper to learn components argument, which `cozystack.platform.package.optional.default` did not have, so every optional package registered through that wrapper could name variant and nothing else. Thirteen other packages get same path for free. `osImage` has two mutually exclusive forms: - `osImage.builtin` boots pool workers by CDI-cloning golden from catalog. Clone is storage layer CSI copy, so OS image never crosses pod network and factory answers once for whole fleet instead of once per worker. - `osImage.factory` keeps HTTP import and lets pool pin own `imageFactoryURL`, `schematicID` and `version`. This is bring-your-own path for operator running own factory or caching mirror, and it is what pool gets when `osImage` is omitted. In-guest talos installer written by reconcile job follows same resolution, so pool that pins release boots it and upgrades into it instead of being flipped back to cluster default halfway. This is pool half of what #3950 asks for. That issue wants platform level defaults for two channels, worker OS image and in-guest registry mirrors. Here image channel gets per-pool source and shared cache, platform default plumbing is left to the issue. ## Existing workers do not roll With `osImage` omitted rendered `KubevirtMachineTemplate` is byte identical to what chart produced before. KMT is named by hash of its own content, so any drift would re-image every worker VM in fleet on next upgrade. Stored render snapshot is untouched by this PR, that is the evidence and not the claim. Editing `osImage` on existing pool re-images that pool, like changing any other image reference. ## What fails at render Clone that would silently degrade into something slower or wrong is refused instead of rendered. Golden absent, or its import in terminal `Failed` phase. Pool `storageClass` different from golden one, because CDI cant CSI-clone across storage classes and falls back to host assisted copy over pod network, which is exactly the transfer `osImage.builtin` removes. Empty class on either side resolves against cluster default class before comparing, so pool at `storageClass: ""` is checked too. `diskSize` below golden storage, because clone target cannot be smaller than source. Talos release the matrix lists as unsupported, whether pool reached it through `talos.version` or through `osImage.*` override. Matrix passes talos minor it does not list, so what it promises is that known-bad pairing is refused, not that every pairing is known. `schematicID` that is not plain lowercase alphanumeric, or version that is not `vMAJOR.MINOR.PATCH`, both are interpolated into DataVolume name and image URL while `values.schema.json` types them as bare strings. Golden that is only mid-import is not an error. CDI holds worker disk until source populates, and failing there would abort whole pool HelmRelease for length of a download. Same reasoning covers pool that already cloned: absent or `Failed` golden fails render only for pool still waiting for its first disk, otherwise reconcile of healthy pool would abort over source it no longer reads. Golden that declares no StorageClass is read from its PVC, not from whatever default is in force today, because those differ once cluster default moves. Cluster with two default classes resolves same way Kubernetes does, newest wins. Pool that already cloned is identified by annotation naming exactly that pool, not by disk name prefix, because pool `md0-gpu` produces disks carrying `md0` prefix, and it reads its own class from its own bound PVC, so admin moving `storageclass.kubernetes.io/is-default-class` does not fail release of pool whose disks are all on right class. That resolved class is then written onto worker disk. Reading one class and binding another is how pool at empty `storageClass` passed the comparison and still took host assisted copy on its next worker, so guard and disk now come from one value. HTTP path leaves empty class to cluster as before, which is what keeps its render byte identical. Catalog side refuses duplicate `(schematicID, version)` entries, entries whose schematic or version cannot produce name pool can reconstruct, and edit to `storage`, `storageClass` or source URL of entry whose golden already exists. Last one is not patchable in place, so without guard it lands as rejected patch on next upgrade. Goldens carry `helm.sh/resource-policy: keep`, so dropping entry stops managing golden instead of deleting it. Missing golden aborts whole Kubernetes HelmRelease of every tenant pinned to it, not just the disk, and each cloned worker disk annotates golden it came from, so "does anything still clone this" is answerable before manual delete. Three drift guards live in `hack/check-worker-image-catalog-defaults.bats`, because values that have to agree sit in files nobody edits together. One-sided talos bump trips all three. ## Upgrade Three pool values that never produced working image rendered before and hard-fail now, so pool carrying any of them flips its HelmRelease to `InstallFailed` on upgrade and not on next edit: `talos.version` in `vMAJOR.MINOR` form, `schematicID` that is not plain lowercase alphanumeric, and empty `talos.imageFactoryURL`, which used to render schemeless `/image/...` source URL. None of the three could boot worker, so this is failing earlier and not a regression, but it surfaces on pool nobody touched and fix in each case is to correct the value. CR carrying such value is admitted by API with value intact, and later unrelated edit reaches `.spec.values` of HelmRelease while it stays `InstallFailed`, so edit is taken everywhere and applied nowhere. ## Why e2e does not exercise the clone path Clone is storage layer copy, so it needs StorageClass whose volumes are reachable from any node. Merge-gating e2e has none: those lanes run on talos containers, which share runner kernel and cannot load DRBD, so node-local `local` is only class there. Nothing would arrange the co-location such a class requires either, golden in `cozy-public` has no consumer and binds where CDI importer landed, while worker disk binds where its VM is scheduled. So the suites keep importing over HTTP with `osImage` omitted, which is also the render the no-roll guarantee rests on. This PR touches no e2e harness file: `hack/` differs from main only by the two guards this feature owns, one tying catalog default golden to pool chart talos and StorageClass defaults, one on in-guest installer heredoc. Switching suites over does not work on that substrate. Golden asks for `replicated`, lane does not have it, CDI resolves no StorageProfile, and catalog HelmRelease times out on DataVolume stuck in `ImportInProgress`. Passing lane own class would fix the class and leave the co-location. Nightly and tag build run same suites on QEMU with DRBD and `replicated`, which is the substrate clone path was verified on. That is where e2e coverage belongs, as its own change with that lane storage headroom measured rather than assumed. Worth being straight about what this leaves, because it bears on whether the feature earns its place. The e2e argument was never the strong one: golden fetches from image factory exactly once, and #3513 established that node-join stall tracks host `kvm_amd` `vgif` flag rather than registry egress. What clone genuinely removes is the fanout, N workers streaming over pod network becomes N storage layer copies. That is property of storage layer, so it is worth having where DRBD is and worth nothing where it is not. This ships as production capability with the constraint stated on the field, not as CI improvement. ## Testing On this tree: - full `make unit-tests` plus `make test-controllers`: 95 charts, 2520 helm-unittest cases, 1710 bats cases, `go test ./pkg/...` and `./internal/...`, exit 0 - `pre-commit run --all-files`: exit 0, root `make generate` and per-app generate both clean, so no generated-file drift - render snapshot unchanged, which is what pins byte identical render for pool that does not adopt `osImage` - mutation pass over render guards, each term deleted or inverted in turn and suite required to notice it by name. Restoring presence gate on catalog StorageClass comparison reddens exactly one case, inverting its `ne` to `eq` reddens five. Reverting worker disk to omit its resolved class reddens three cases that pin where builtin disk binds, and forcing that class non-empty on every path reddens HTTP-path case and all three render snapshots, with snapshot diff naming the changed KMT hash `E2E Tests` passed on run 35831830568. That run was on the previous head, 4fd8e7ba, and this head differs from it only by one test comment and the commit message. ## Verified on a live cluster Throwaway three-node talos stand (OCI, talos v1.13.6, LINSTOR/ZFS, `replicated` StorageClass) installed from this branch `packages/` tree. This covers what neither `helm template` nor unit suites can answer. It predates the change that writes resolved StorageClass onto worker disk, and that stand ran with explicit `replicated` on both sides, which is the value that change now renders. - The catalog wires up from `bundles.enabledPackages` alone: `PackageSource cozystack.kubernetes-worker-image` reconciled, its HelmRelease installed, and the golden `talos-worker-<schematic>-v1.13.6` imported to `Succeeded` in 108s (6Gi, RWX, `replicated`). - A pool on `osImage.builtin` clones it on the storage layer. Both worker DataVolumes went `CSICloneInProgress` then `Succeeded` in 43s with `Running=False reason=Completed message="Clone Complete"`, carrying `source.pvc` and no `source.http`, and no importer or upload Pod appeared in the tenant namespace. - The clone yields a bootable talos root disk. Both worker VMs reached `Running`/`Ready`, joined the tenant cluster and went `Ready` about 66s after creation, and the tenant cilium, coredns, csi, ingress-nginx and metrics-server addons all installed on them. - Access modes match across the hop: golden `ReadWriteMany` 6Gi to worker `ReadWriteMany` 20Gi on the same `replicated` class, grown by CDI. - The written annotations are correct in practice: each worker disk carries `kubernetes-worker-image.cozystack.io/golden` naming the golden and `.../pool` naming its pool. - helm-controller converges on a builtin pool: forcing a reconcile left the content-hashed KMT name unchanged and the VMI and DataVolume UIDs identical, so a reconcile does not roll the pool. - Cross-namespace clone RBAC is in place as shipped: `create datavolumes --subresource=source -n cozy-public` resolves to `yes` for a tenant ServiceAccount through the `cdi-clone-dv` RoleBinding, and CDI runs with `cloneStrategyOverride: csi-clone`. This PR adds no RBAC of its own. ### Screenshots Not applicable, no UI change. ### Downstream repositories Trigger map points at two repositories. Provider models every pool field by hand, so `osImage` needs schema, model and expand/flatten pair there. Already tracked as cozystack/terraform-provider-cozystack#39, filed when the field was still called `image`. `content/en/docs/next/operations/configuration/platform-package.md` is a hand-written table of `spec.components.platform.values.*` keys and nothing generates it, so `kubernetesWorkerImage` needs a row there. Filed as cozystack/website#707. - [ ] No downstream repository is affected by this change - [x] [cozystack/website](https://github.com/cozystack/website) - follow-up: https://github.com/cozystack/website/issues/707 - [x] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: https://github.com/cozystack/terraform-provider-cozystack/issues/39 - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(kubernetes): tenant worker pools can boot their system disk from a shared golden talos image instead of importing it from the Image Factory once per worker. Enable the opt-in `cozystack.kubernetes-worker-image` package via `bundles.enabledPackages` to publish one golden DataVolume per `(schematicID, version)` in `cozy-public`, then set `osImage.builtin` on a `KubernetesNodes` pool to have CDI clone it on the storage layer. A pool that omits `osImage` keeps importing over HTTP and renders exactly as before. The clone path needs the pool and the golden on the same StorageClass, and one whose volumes are reachable from any node, in practice a replicated/DRBD class. ``` |
||
|
Myasnikov Daniil
|
bc8c54d6e6 |
feat(kubernetes): boot tenant worker disks from a shared golden Talos image
Every tenant worker VM imports the same Talos raw image from the Image Factory over HTTP, once per worker: a 20-worker cluster fetches the identical ~4.15 GiB artifact 20 times, and each fetch is a live dependency on the Factory at exactly the moment a node joins. packages/system/kubernetes-worker-image is a new opt-in catalog that holds one golden DataVolume per (schematicID, version) in cozy-public, named talos-worker-<schematicID>-<version>. A worker pool opts in with osImage.builtin on its own KubernetesNodes resource, and its disk-system DataVolume then carries source.pvc pointing at that golden, so CDI performs a storage-layer CSI clone instead of an HTTP import -- one import per flavor, shared by every worker of every tenant. Confirmed on a LINSTOR-backed cluster: the worker disk is a CSI clone plus a resize, with no host-assisted upload pod. Both halves are off unless asked for. The catalog is registered through the platform's optional-package helper and disabled by default, so a cluster that does not enable it creates no golden and keeps importing over HTTP. The disk source is derived entirely from osImage, which is absent by default, so a pool that does not set it renders byte-identical to the pre-feature chart and adopting the feature never rolls existing workers. Editing osImage on an existing pool re-images that pool, as changing any other image reference does. What the render refuses, rather than degrading into a silent fallback: - A pool whose golden has no catalog entry, or whose golden terminally failed to import. A golden that is merely mid-import is not an error; CDI holds the worker disk until the source populates. - A pool whose StorageClass differs from its golden's. CDI cannot CSI-clone across classes and falls back to a host-assisted copy over the pod network, which is the transfer this feature exists to remove. An empty class on either side means the cluster default and is resolved before the comparison, and a pool that has already cloned reads its class from its own bound PVC rather than from today's default -- the golden's side is frozen the same way, and an admin moving storageclass.kubernetes.io/is-default-class must not fail the release of a pool whose disks are all on the right class. That resolved class is then written onto the worker disk, so the disk binds where the guard checked instead of on whatever the default has become by then -- reading one class and binding another is how a pool at an empty storageClass passed the comparison and still took the host-assisted copy. The HTTP path leaves an empty class to the cluster as before, which is what keeps its render, and the KubevirtMachineTemplate hash named after it, byte-identical. - A diskSize below the golden's storage size, which a clone target cannot be. - A schematicID that is not a plain lowercase alphanumeric identifier, or a version that is not a vMAJOR.MINOR.PATCH release. Both are interpolated into a DataVolume name and an image URL, and values.schema.json types them as bare strings, so a malformed one otherwise reaches the render. The catalog applies the same patterns, since both sides build the same name from the same fields. - An images[] entry edited after its golden exists. A DataVolume spec cannot be patched in place, so the message names the entry and the supported move -- a new (schematicID, version) -- instead of leaving the API server to reject the patch on the next upgrade. Goldens carry helm.sh/resource-policy: keep, so dropping an entry stops managing a golden rather than deleting it: a missing golden aborts the whole Kubernetes HelmRelease of every tenant pinned to it, not just the disk. Each cloned worker disk annotates the golden it came from and the pool that owns it, so "does anything still clone this?" is answerable before a manual delete instead of after. A builtin pool needs a StorageClass whose volumes are reachable from any node, in practice a replicated/DRBD one. The golden in cozy-public has no consumer and binds as soon as it imports, wherever CDI's importer landed, while a worker disk binds where its VM is scheduled, and nothing here arranges for those to be the same node. The platform ships cloneStrategyOverride: csi-clone, which rules out the host-assisted strategy that would cross nodes. What a node-pinned class does in that situation is not measured, so values.yaml states the requirement and not a symptom. ComputePlane pools forward only the per-pool shape fields, and osImage is excluded there by name: the worker OS image, its Talos installer and its Image Factory are operator decisions about the platform's own images. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
Timofei Larkin
|
a3911811c7 |
feat(api): take Application name limits from the application's schema
The API server capped Kubernetes and Kafka names by knowing what those two charts render: worker pool releases under a 17-character prefix, controller pods with a 13-character suffix. That is the charts' knowledge sitting in the platform, and it does not generalise. The next application with a sub-resource budget needs another branch on Kind, and an application served from outside this repository cannot get one at all. An application now declares the limits on its own name in its schema, under x-cozystack-name, and the server applies whatever it finds there for whatever kind the ApplicationDefinition describes. A declaration only tightens: prefix + name must still fit the 53-character Helm release name limit. A rejected name is answered with the chart's own explanation of the limit. The schema is untrusted input, and definitions from other repositories are written by hand. A declaration that cannot be enforced as written, whether an unknown keyword, a wrong type, a limit no name satisfies or a pattern Go cannot compile, refuses creates of that kind with a configuration error. Dropping it would admit names the chart cannot render; applying it would reject every name and blame the user. An upgrade brings cozystack-api up before the definitions it serves are re-rendered, so for a while the new server can read a Kubernetes or Kafka definition that predates its declaration. The two old caps stay as a floor for exactly that case, a definition that declares nothing, until no supported upgrade starts from one. Assisted-by: LLM Signed-off-by: Timofei Larkin <lllamnyp@gmail.com> |
||
|
Aleksei Sviridkin
|
08bbed3fb5 |
feat(talos-log-collector): add talos-log-collector package (#3260)
## What this PR does Adds `talos-log-collector`, an optional system package: a node-local Vector DaemonSet that receives Talos machine and kernel logs and forwards them to the tenant VictoriaLogs (vlinsert), alongside the container/audit/event logs already collected by monitoring-agents. Talos keeps system and kernel (kmsg) logs inside the OS and does not write them to a host file the Fluent Bit `tail` input could read, so these logs are currently never collected. Vector receives them over the node loopback (Talos pushes to 127.0.0.1:5170). Talos exposes the two streams through independent config paths, and both must point at the loopback socket: `machine.logging.destinations` forwards the JSON-lines service logs, and a `KmsgLogConfig` document forwards the kernel (kmsg) stream (including DRBD kmsg). The node-side setup for both is in the README. Design notes: - The pod stays on the pod network so cluster DNS resolves vlinsert with no extra config. Talos pushes to 127.0.0.1:5170; a `hostPort` bound to `hostIP: 127.0.0.1` publishes that loopback socket into the pod via portmap, keeping the receiver off the host network (no node-wide pod exposure). - The receiver binds inside the pod netns, so a NetworkPolicy is load-bearing: a CiliumNetworkPolicy restricts ingress to the host entity when Cilium is present, otherwise a default-deny-ingress `networking.k8s.io/v1` fallback keeps the socket protected on non-Cilium variants. - Runs non-root, read-only root filesystem, all capabilities dropped. - Optional package (opt-in via `bundles.enabledPackages`): inert until each Talos node is configured to push logs. Node-side setup is in the README. Verified end-to-end on a Talos v1.12 dev cluster: service and kernel logs (including DRBD kmsg) reach VictoriaLogs; pods run non-root with 0 restarts. ### Release note ```release-note feat(talos-log-collector): add talos-log-collector package to collect Talos machine and kernel logs into VictoriaLogs ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added an optional node-local Talos log collector (via system bundle packages) that forwards Talos service and kernel logs over loopback to the platform log ingestion endpoint. * Introduced the collector Helm chart (Vector-based) with configurable log level, loopback TCP receive port, digest-pinned image, default resources, and routing target. * Added conditional Cilium network policy support with a safe deny-by-default fallback. * **Security** * Hardened the collector to run non-root with reduced privileges, read-only filesystem, and dropped Linux capabilities (and disabled service account token automount). * **Documentation** * Documented configuration requirements (including kernel log enablement), operational behavior, and teardown steps. * **Build & Release** * Extended the build to include building the collector’s image. * **Tests** * Added Helm rendering/contract tests covering daemonset, configmap, service account, and network policy. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
Kirill Ilin
|
938595afe3 |
fix(keycloak): validate the realm list wherever it is set
The list was read only inside the adminHost branch, so a value the chart would refuse — master, a scalar, a name that splits the path — sat in the values unnoticed until someone turned the admin hostname on, and the refusal then landed on the change of authentication topology rather than on the edit that caused it. Build the list on every render and let the branches use the result. Assisted-By: LLM Signed-off-by: Kirill Ilin <stitch14@yandex.ru> |
||
|
Kirill Ilin
|
c96fe3d3ef |
fix(platform): refuse master as the OIDC realm name
The realm named here is where keycloak-configure creates every platform client and the cluster-admin role, and where dashboard users sign in. Naming master puts all of that inside the realm that holds the Keycloak super-admin, and publishes its login page wherever the platform realm is published — and the guard belongs where the value is set, since the Keycloak chart only reads it once a separate admin hostname is configured. Assisted-By: LLM Signed-off-by: Kirill Ilin <stitch14@yandex.ru> |
||
|
Alexey Artamonov
|
142a14cb69 |
fix(platform): reject an empty realm name instead of coercing it to cozy
realmName resolved through `| default "cozy"`, which fires on both null and "". Unset (null) legitimately means the default, but an explicit "" is a meaningless value and coercing it hid the mistake. Split the two: null falls back to cozy, an empty string reaches the charset guard and is rejected — the same null-vs-"" distinction keycloakInternalUrl already draws a few lines below. Assisted-by: LLM Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
ff637ed9a2 |
fix(platform): validate the realm-name charset and regenerate kubernetes artifacts
The realm-name guard checked only the type and echoed the parsed value back, so its hint told an operator who wrote `on` to set realmName: "true" — the token YAML had already discarded. Drop the echo and add a slug-charset check: the name is spliced verbatim into URL path segments and a shell token, so a "/" or a space must be rejected at the source rather than split a URL or the hook script downstream. The description edit in the previous commit was hand-applied to the generated kubernetes README and never reached the Go types, leaving pre-commit red; regenerate both with cozyvalues-gen. Finish the oidc-tenant System-mode prose that still read cozy as a fixed name. Assisted-by: LLM Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
949096694b |
fix(platform): reject non-string realm names and shell-quote the hook realm
A realmName that YAML resolves to an int or a bool (a bare 123, or a reserved word like on/off) was coerced with toString, silently renaming the realm to something the operator never typed (on -> "true"). Fail the render with a quoting hint at the source instead of surfacing it later as a broken issuer URL. The update-email hook Job interpolated the realm into its shell script unquoted, so a name carrying a space or a shell metacharacter could break or inject into the script; single-quote it. The Grafana and managed-cluster issuer helpers build the URL with printf %s straight off the channel value, so guard them with toString for the same non-string reason. Name the configured realm in the tenant kube-apiserver oidc.mode description and the Grafana identity-mode comment, which still read cozy as if it were fixed. Assisted-by: LLM Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
80d32b3ab7 |
fix(keycloak): complete realm-name coverage and guard non-string names
The enable-update-email hook Job in keycloak-configure still pinned REALM=cozy, so on a custom realmName it waited on a realm the chart never provisions and the cold install timed out — the one seventh consumer left behind, and the only value nobody could set without breaking the install. A bare-integer or YAML-reserved realm name reached the printf %s that builds the derived keycloakInternalUrl as a Go int, rendering a "%!s(...)" format error into the URL; coerce the name to a string once at the source. Document that renaming the realm on a running cluster provisions a fresh empty realm and orphans the accounts in the old one, and note in the OIDC tenant and grafana guides that the realm name is now the configurable default. info/Makefile carried NAME=etcd, so cozyhr drove the wrong release from that package; correct it while touching the file. Assisted-by: LLM Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Alexey Artamonov
|
44a9a8e735 |
feat(platform): make the Keycloak realm name configurable
The realm name "cozy" was hardcoded in keycloak-configure (which owns the realm, its clients and the cozystack-cluster-admin roles), in the dashboard and linstor-gui gatekeepers, in the info kubeconfig, and in the Grafana and managed-Kubernetes apiserver OIDC issuers. Operators could not rename the realm without patching vendored templates, which `make update` reverts. The apiserver OIDC issuer is already configurable via talm oidcIssuerUrl, so pointing it at a custom realm left every SSO component on "cozy" and broke login with an issuer mismatch. authentication.oidc.realmName (default "cozy") now rides the _cluster channel so every consumer resolves the same realm, and the default keycloakInternalUrl is derived from it so the realm is named in one place. Assisted-by: LLM Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
Timofei Larkin
|
c398e0e116 |
Merge branch 'main' into chore/drop-http-cache
main took migration 57 and moved migrations.targetVersion to 58 while this branch was open, so that line is the one conflict: 57 at the merge base, 58 on main, 59 here. Resolved as 59, which is what this branch's migration 58 requires, since run-migrations.sh loops up to targetVersion - 1. Merged rather than rebased because the branch carries commits that are not mine to rewrite. Signed-off-by: Timofei Larkin <lllamnyp@gmail.com> |
||
|
Timofei Larkin
|
2cbc02bd10 |
fix(platform): freeze HTTPCache on the artifact the cluster runs
Pinning the frozen source to a digest written into the migration picks one release for every cluster, and v1.6.0 is not even the last one that ships http-cache: v1.6.1 through v1.6.3 and v1.7.0-alpha.1 all do, and 1.6 patch releases may keep doing so. A cluster on any of those would be rolled back to an older chart by the upgrade that was meant to leave its instances alone, and an air-gapped mirror resolves the constant only if someone mirrored that exact manifest. The hook runs before the upgrade re-points cozystack-packages, so the live object still names the release the instances render from, in whatever registry the operator serves it from and with whatever pull secret and verification they configured. Reading the digest off it makes the freeze a no-op by construction and needs no knowledge of which tag was last. spec.ref.digest is used when the installer pinned one; a tag or semver ref goes through status.artifact.revision, whose digest half is the manifest digest. status.artifact.digest is the checksum of the downloaded tarball and cannot stand in. A source with neither has nothing to freeze on and the migration stops there. The copy also carries the no-delete label the platform chart puts on the original, because it is the only chart source those instances have left. The tenant grant travels with the freeze as well. cozy:tenant:admin:base enumerates the apps.cozystack.io resources a tenant owner may write, and an application that has left the catalog has no business in that list: the next sweep over it takes the entry as dead config, and the failure is silent and remote, a Forbidden for the one person who still needs to remove what they have. The chart drops httpcaches, and a cluster that freezes gets a ClusterRole under the tenant admin aggregation label instead, applied before the upgrade drops the rule so the access never lapses and carrying the verb set the chart had so nothing changes for the owner. A cluster with no instance is granted nothing. The Package delete on the no-instance path has to block. The operator reconciles off an informer cache, so a reconcile in flight against the pre-delete entry re-creates the release it owns, and with it the ApplicationDefinition and the Helm storage the following lines remove. Returning immediately made the ordering a property of the command log rather than of the cluster. The preset check's SIGPIPE note named http-cache-rd as its example of a large enum, and that chart goes away here; kubernetes-rd carries the same enums. Numbered 58 rather than 57: main already carries a migration 57, the SeaweedFS volume-size-limit one, and its targetVersion is already 58. The whole shape of this retirement was worked out here rather than anywhere reusable, so docs/deprecating-applications.md writes it down as a procedure: how to pick between migrating onto a successor and freezing, what the prune takes with it, and what the migration owes a cluster on each branch. The next application to go should not have to rediscover it. Assisted-by: LLM Signed-off-by: Timofei Larkin <lllamnyp@gmail.com> |
||
|
Yan Bondarenko
|
5ed076cff8 |
feat(kubevirt): expose migration configuration through platform values
Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |