mirror of
https://github.com/cozystack/cozystack.git
synced 2026-11-22 04:33:36 +09:00
2b5770cb4a4636f95b32f436d2ec276df2e91cf4
4055
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
2b5770cb4a |
fix(vm-instance)!: refuse resources that cannot size the VM (#4405)
## What this PR does A vm-instance could ask for half a core and get one, with no error anywhere. `resources.cpu` and `resources.sockets` are typed as quantities, but they end up in `domain.cpu.cores` and `domain.cpu.sockets`, which KubeVirt declares as unsigned integers. The chart cast them with `int64`. That turns `500m` or `1.5` into `0` without an error, and KubeVirt boots a zero core count as one core. The chart now reads these two fields the way an integer field reads them. It decodes the raw value as YAML and stops the render unless the result is a positive whole number that fits in uint32. So `2`, `"2.0"`, `"+2"` and `"1e1"` render as the integer they decode to. `500m`, `2000m`, `1k`, `"1.5"`, `0`, `"0"`, `"-2"`, `"010"` and `"4294967296"` stop the render with an error that names the field. A leading zero is refused because YAML reads `010` as octal 8. The check looks at presence, not truthiness, so an unquoted `0` is refused instead of being read as unset. It is the same rule #4386 uses for kubernetes-nodes. Memory gets a presence check too, which covers the case from the issue thread. A quoted `"0"` was truthy and rendered `requests.memory: "0"`, while an unquoted `0` was falsy and got dropped. Both spellings of zero, and any negative amount, now stop the render. Any other value passes through unchanged, because KubeVirt takes memory as a quantity. That includes an amount below one byte, such as `500m` or `1e-3`, which renders as it does on `main` today; this change does not refuse it. The check lives in `virtual-machine.domainResources`. The VM spec, the instance type decision and the update hook's patch all take their values from that helper. The tests that pinned `cores: 0` as the old behaviour now expect the refusal, and the helper comments about the truncation are trimmed. This is a breaking change. A release that carries one of these values fails its next upgrade until the value is fixed: a cpu or sockets that is not a positive whole number within uint32 or has a leading zero, and a zero or negative memory. This includes a cpu or sockets set on its own next to an `instanceType`, which used to be ignored whatever it held. Some values change meaning instead of failing. A value like `"1e1"` or `"2."` was truncated to 0 by the `int64` cast, so the VM booted with one core. Now it gets the count the value spells, so that VM changes size on upgrade. I refuse these values instead of rounding them, because silent coercion is how `500m` became one core in the first place. The issue asks for a deprecation path, and I did not add a migration that rewrites stored values. It would have to guess what `500m` meant, and both options (one core, or dropping the field) hide the same mistake again. The HelmRelease upgrade retries without uninstalling, so the running VM stays up until someone fixes the value. #4386 makes the same trade-off. The check runs at render time, not at admission. The schema still accepts `500m`, so the API takes the object and the error shows up in the HelmRelease status. Narrowing the schema to integers, as the issue also proposes, would move the error to admission, but it needs a migration of stored values. I left it for a separate change. The field descriptions now say which values are accepted, and `make generate` carried them into the README, the schema, the Go types and the ApplicationDefinition. The new `tests/resources_values_test.yaml` covers the accepted and refused spellings for cpu, sockets and memory. `tests/instancetype_resources_test.yaml` gets a case for a lone cpu next to `cpuModel`. The whole vm-instance suite passes. Every refusal case in the new file, and the `"1e1"` case, fails against the current `main` template. Closes #4104 ### Screenshots No UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: I walked the trigger map against the diff. No field is added, removed or renamed, and no default or enum changes. Only three field descriptions change, and the website reference page is regenerated from the README at release time. ### Release note ```release-note fix(vm-instance)!: resources.cpu and resources.sockets must now be positive whole numbers, and resources.memory a positive quantity. A cpu or sockets that is not a plain whole number within uint32 (for example 500m, 1k or 1.5), or a zero or negative memory, now fails at render time with an error naming the field, instead of silently becoming a one-core VM or a zero memory request. A release carrying such a value fails its next upgrade until the value is fixed. A value such as 1e1 or 2., which used to be truncated to one core, now sizes the VM with the count it spells. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Bug Fixes** * VM sizing now accepts only positive whole-number CPU and socket values within the supported range. Fractional, millicore, zero, negative, and out-of-range values are rejected during rendering. * Memory values must be positive quantities. A CPU or socket value specified alone does not size the VM and is ignored; incomplete sizing is rejected where required. * **Documentation** * Updated VM instance resource guidance to clarify CPU and socket requirements, memory validation, and how socket values define vCPU topology. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
99de79ff52 |
fix(cdi): pin the CDI release kubevirt-cdi is reconciled against and stop update overwriting it (#4107)
## What this PR does `packages/system/kubevirt-cdi` resolved its CDI version at run time from GitHub's `releases/latest` redirect and wrote the result straight over `templates/cdi-cr.yaml`. That file is not vendored. Upstream ships a bare CDI object; ours adds Helm templating for `cloneStrategyOverride`, `uploadProxyURL` and the worker-pod `podResourceRequirements`, the `ExpandDisks` feature gate, a `CriticalAddonsOnly` toleration, and the two RBAC documents that let a tenant clone from the golden-image namespace. I diffed the two at v1.66.1 to write that list, so it is complete as of that release rather than only hedged: upstream ships 283 bytes with one feature gate, two nodeSelectors and an `imagePullPolicy`, and we are a strict superset of it. Every entry arrived by hand, so `wget -O templates/cdi-cr.yaml` was not refreshing a vendored file, it was overwriting a first-party one. Same loss as the `rm -rf templates` that #4097 removes, arriving through the fetch instead of the wipe. `update` now pins the release the object is reconciled against, and fetches it only to confirm the bytes still hash to a digest I measured. Nothing is written under `templates/`. At the next CDI bump whose asset differs, that check fails, which is the point: upstream moving its own defaults is when the local copy needs a human to reconcile it, not an overwrite. The download is kept on a mismatch, since reconciling one starts by reading it. `RELEASE` is `v1.66.1`, which is the release `kubevirt-cdi-operator` vendors, so the pin and the deployed version agree. What the platform deploys is decided by that package, and it can move to another release without this file changing, so this line is pointed at it by hand. `update` then checks the two agree: it compares `RELEASE` with the `cdi-operator` image tag that package vendors and fails naming both versions when they differ, because otherwise its closing line would report a release the platform may no longer run. That is a check and not a derivation, so `RELEASE` stays a pin a human moves. Upstream publishes no checksum for the asset, so the pin comes from a download rather than from a published file: `a497f90de608c1df26f9ee4095289373f17132d74a2042ca03e00c17c964f8a7`. It catches an asset that moved under a tag that should be immutable. It is not authenticity verification, and the comment beside it says so. The digest command is chosen when `update` expands it, `sha256sum` when it is on PATH and `shasum -a 256` otherwise. Which one ran here is worth stating, because the usual claim about macOS is out of date: this machine picked `sha256sum`, and that binary is `/sbin/sha256sum`, a native Darwin one rather than GNU coreutils. It reports `sha256sum (Darwin) 1.0` and prints the same `<digest> <path>` format. The package already had a `test:` target, from `0418577f5`, so what it gains here is the `.PHONY` line that commit did not add. `hack/package.mk` declares only the nine targets it defines itself, so without it a file or directory named `test` or `update` beside the Makefile makes make consider that target up to date and skip the recipe in silence. The new suite pins the `ExpandDisks` gate, the toleration, `podResourceRequirements`, the `uploadProxyURL` override and the clone RBAC, and renders the upload-proxy Ingress and TLSRoute, each under the `gateway-enabled` value that selects it. The clone-strategy override is pinned by `tests/clone_strategy_test.yaml`, which is already on `main`. One consequence of the pin move is a claim rather than a number, so it gets its own line. Upstream carried `WebhookPvcRendering` from v1.63.0 through v1.65.0 and dropped it by v1.66.0; the local object never carried it, so the divergence ran both ways across those three releases and one way since. The comment says to re-derive the delta at each bump instead of trusting it, because that was a fact about a span of releases and not about CDI. `packages/system/kubevirt-cdi/Makefile` carried two identical `test:` targets, one from `0418577f5` and one appended by a later merge, so make printed `overriding commands for target 'test'` on every invocation in the package. The second sat inside the span this recipe rewrites, so it goes with the rewrite rather than being re-authored into it. The comment kept above it is the reason a reader should not add another. Closes #4157. ### Scope An earlier revision also pinned and tested `kubevirt-cdi-operator`. #3920 has since landed the two real bugs in that recipe, the patch strip level and `patches/tolerations.diff`, so that half is dropped here rather than merged twice. Pinning and testing the operator package is #4190. Named improvements left alone, so they read as choices. - The two upload-proxy tests each render their route under the `gateway-enabled` value that selects it and neither asserts the other is absent; the templates already settle that with `ne "true"` and `eq "true"` on the same variable, and `tests/standalone_render_test.yaml` already asserts each route absent under the values that select the other. So the package does cover it; these two cases just do not, and a third copy would not add anything. - The CDI object carries no version string for a rendered-output assertion, so `RELEASE` is checked by `make update` rather than by `make test`. - Neither route case pins the backend service port, 443 in both templates; that is outside what the suite claims. - The template-loss guard still counts `cdi-cr.yaml` as named, because the download line in `update` mentions the stem, so re-adding a wipe here would have it report two files instead of three; the guard's header already says a mention is not proof of a write, and the case needs a wipe this recipe no longer has. - The suite pins the local additions by design, and most of the upstream-derived half is pinned by nothing: `imagePullPolicy` and the two `nodeSelector` blocks have no assertion anywhere under `tests/`. `HonorWaitForFirstConsumer` is the exception and only as a side effect: `featureGates` is pinned whole, so that gate rides along with `ExpandDisks`. The rest are maintained by the same hand reconciliation the pin forces whenever the upstream asset changes, so a carry-over that drops one of them is green. Three asserts would close what is left. - One more, remote enough to name rather than code around: if the digest tool is missing entirely, `$$actual` comes out empty, the comparison against `CR_SHA256` fails, and the error text diagnoses a moved asset when the real cause is a machine with neither `sha256sum` nor `shasum`. Busybox ships the first and macOS ships the second, so nobody has hit it. Closing it means an executable line, which would then owe mutation coverage of its own, and that is disproportionate to a case with no known instance. The mechanism is written here so the next reader does not have to re-derive it from an error message that points the wrong way. - Separately, the per-package `.PHONY` gap this Makefile's own line argues against is not specific to this package: most package Makefiles do not declare their own `test:` or `update:` phony, and #4214 tracks that. - A key that does not exist yet is not held either: every item in the delta is pinned whole, but a NEW key appearing at `spec` or `spec.config` level passes unnoticed, and such a key can change behaviour rather than sit inert. I confirmed it on a copy extracted from this commit, appending `spec.config.filesystemOverhead.global: "0.99"` and getting a green suite. That is the shape to recognise at the next bump: not a changed value, which is caught, but a new sibling key beside the ones we pin. - And `spec.config.podResourceRequirements` is now pinned whole here and by four leaves in `tests/importer-resources_test.yaml`: the whole-map form is the stronger one and the leaves are a subset of it, so changing the default takes two edits and the second failure reads as a surprise until you know why both exist. - If the operator's image reference ever gains a digest (`:v1.66.1@sha256:...`), `${deployed##*:}` takes the digest's hex instead of the tag, and `update` fails with a loud false mismatch rather than passing silently. - Deriving `RELEASE` with `$(shell ...)` from the sibling manifest was suggested and declined on merits: a derived value is not a pin, the point is that a human chooses which CDI release this object is reconciled against, and computing it from whatever the neighbour last vendored hides that choice from the diff. The operator comparison lives in `update` and not in `test:`, even though `kubevirt-operator` ties its own manifest to the tree from `test:`. A mismatch calls for a hand reconciliation, and `update` is the recipe that asks for one; it is also where the success line that would otherwise name the wrong release is printed. I checked it on a copy extracted from this commit. With the operator's image tag moved to v1.67.0, `make update` exits 2 and names both versions. With the tags equal it passes. With the check's `exit 1` removed, the moved tag passes again, so the red comes from the check. Worth knowing when reading the mismatch path: `kubevirt-operator` deletes its download on a hash mismatch and this package keeps it. That is deliberate here, since reconciling a moved asset starts by reading it, but the two packages do read oppositely and neither file says so. ### Base and ordering This stacks on #4097 and should land after it. Both edit `packages/system/kubevirt-cdi/Makefile`, and this change builds directly on that one's edit to the same recipe, so it is based on the head of `fix/cdi-update-keeps-local-templates` rather than on `main`. GitHub computes mergeability against the PR's base branch, which here is that stack branch and not `main`. Both branches are rebased onto current `main`, which has not touched these paths since the previous merge-base. ### Screenshots No UI changes. ### Downstream repositories Walked the trigger map against the diff. Two entries come close and neither fires. The website triggers on developer tooling and package Makefiles, but `content/en/docs/next/development.md` documents `make update` only as "Update Helm chart and versions from the upstream source", which still holds, and its worked example is cilium, which this does not touch. Its `make test` line refers to the e2e sandbox in `packages/core/testing`, not per-package unit tests. `ccp` triggers on `hack/` layout and on what a make target does, and nothing under `hack/` is touched. Its `package-bump` skill already assumes a package's `update` recipe hardcodes the upstream version instead of resolving it at run time, and names cilium, kafka-operator, opensearch-operator and postgres-operator as examples. `kubevirt-cdi` was one of those counterexamples and now is not. Pinning `kubevirt-cdi-operator` the same way is #4190 and out of scope here. The skill handles vendored Helm charts, in-repo image builds and version enums, and a raw manifest download is none of those. Everything else in the map needs an app, a schema, an installer value, a variant or a release asset. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(cdi): `make update` in kubevirt-cdi no longer overwrites the hand-maintained CDI object. It pins the CDI release that object is reconciled against instead of resolving GitHub's releases/latest at run time, and verifies the fetched asset against a pinned sha256 without writing under templates/. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Reliability** * Updates now use verified, pinned CDI releases to prevent unintended manifest changes. * Failed or checksum-mismatched downloads no longer overwrite existing configuration. * **Bug Fixes** * Preserved local CDI customizations during release updates. * Added validation for CDI resources, access controls, upload-proxy routing, and TLS configuration. * **Tests** * Added automated checks for incomplete template refreshes and generated Kubernetes resources. * Added chart tests covering CDI behavior, clone permissions, and upload-proxy networking. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
9e0e1239da |
fix(kubevirt-cdi-operator): pin the vendored CDI release (#4383)
<!-- Thank you for making a contribution! Here are some tips for you: - Use Conventional Commits for the PR title: `type(scope): description` - Types: feat, fix, docs, style, refactor, perf, test, build, ci, chore - Scopes are not an exhaustive list — pick the most specific scope for the change and extend the list when a genuinely new area appears. Examples: - System components: dashboard, platform, operator, cilium, kube-ovn, linstor, fluxcd, cluster-api - Managed apps: postgres, mariadb, redis, kafka, clickhouse, virtual-machine, kubernetes - Development and maintenance: api, hack, tests, ci, docs, maintenance - Breaking changes: append `!` after type/scope (`feat(api)!: ...`) or add a `BREAKING CHANGE:` footer - If it's a work in progress, consider creating this PR as a draft. - Don't hesistate to ask for opinion and review in the community chats, even if it's still a draft. - Add the label `kind/backport` if it's a bugfix that needs to be backported to a previous version. --> ## What this PR does This pins the CDI release the platform deploys, so it moves only when someone edits a version line. Until now `make update` in `packages/system/kubevirt-cdi-operator` took the release from GitHub's `releases/latest` redirect. Any refresh could move CDI and its image tags, and the diff had no version line to review. The fix follows the shape `packages/system/kubevirt-operator` already uses. - `RELEASE = v1.66.1` names the release. It is the one already vendored, so `templates/` does not change, and `make update` reproduces it byte for byte. - `MANIFEST_SHA256` pins the downloaded asset and matches the digest GitHub publishes for it. On a mismatch the recipe writes nothing. - The download is transformed and patched outside `templates/` and moved in at the end. A refresh that fails halfway leaves the vendored file as it was. - A new `test` target runs a helm-unittest suite over the vendored manifest, then greps it for the operator image at `$(RELEASE)`. The grep is there because helm-unittest cannot see a Makefile variable. Moving the pin without re-running `update` fails here. One thing is left for later. The suite asserts three of the eight image references directly, and the digest keeps the rest in step on `update`, but a hand edit to one of the other image env entries would pass. Closes #4190 ### Screenshots <!-- REQUIRED for UI changes: attach screenshots or screen recordings demonstrating the visual impact of your changes. PRs with UI changes without screenshots will not be merged. --> ### Downstream repositories <!-- Cozystack is upstream for repositories that are NOT kept in sync with it automatically, and nothing in CI compares the two sides, so a change here can break them silently. Which change forces what, and which file to touch, is the trigger map in docs/agents/contributing.md under "Downstream Repositories". Walk it before you tick anything. IF YOU ARE AN AI AGENT OR AN LLM, THIS IS PART OF THE TASK, NOT A FORM TO FILL IN: 1. Walk the trigger map against the actual diff of this PR, file by file. Do not decide from the PR title or from your memory of what you changed. 2. For every repository you tick, open the follow-up PR there and link it on the same line. A ticked box with no link claims work that does not exist, which is worse than an empty box. Search that repository for an open PR or issue covering it first, and link that instead of filing a duplicate. 3. When the follow-up is out of scope, or needs a decision that is not yours to make, open an issue in that repository instead, link that, and say so in the PR body. Do not push a speculative PR into another repository just to fill a line here. 4. Do not tick "No downstream repository is affected" to make the checklist go away. If you are unsure, leave every box empty and say so in the PR body, so a human decides. --> - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: Nothing on the trigger map applies. The diff touches one package's own Makefile, `.gitignore` and tests, and no shared tooling, values, CRD, namespace or release asset. ### Release note <!-- Write a release note: - Explain what has changed internally and for users. - Start with the same `type(scope):` prefix as in the PR title - Follow the guidelines at https://github.com/kubernetes/community/blob/master/contributors/guide/release-notes.md. --> ```release-note fix(kubevirt-cdi-operator): pin the vendored CDI release to v1.66.1 and verify the downloaded manifest against a digest, so refreshing the package no longer moves the deployed CDI. The deployed version stays the same. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Updates** * The KubeVirt CDI Operator is now pinned to version 1.66.1, providing a consistent operator version across deployments. * **Reliability** * Operator manifest updates are checked before they’re applied, helping prevent incomplete or mismatched manifests from replacing the current version. * Deployment configuration is validated to ensure it matches the pinned release. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
eec069b94f |
docs(kubevirt): name every payload line the tail checks do not cover (#4340)
## What this PR does Follow-up to a review comment on #4254 that was right and landed after the merge. The sentence that PR left in `packages/system/kubevirt/Makefile` says the device and CPU payload lines stay outside the marker checks, which reads as if the rest are handled. The `- {{ . }}` entries inside the `extraFeatureGates` and `disabledFeatureGates` ranges are neither device nor CPU and are not covered either. Deleting either of them from a copy of the CR and running `make update CR_FILE=<copy>` exits 0 and leaves the range wrapped around nothing, with no check firing; dropping `- Template` from a clean copy fails the target as a control. The wording now names every uncovered payload line: the device tables, the `cpuAllocationRatio` value and both feature-gate entries, and keeps `migrations` as the one block validated whole. Covering those payloads in code is a wider change; happy to do it separately if that is wanted. ### Screenshots Not a UI change. ### Downstream repositories Comment-only change in one Makefile. - [x] No downstream repository is affected by this change ### Release note ```release-note NONE ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Documentation** * Clarified update validation guidance for disabled-feature markers. * Documented partial-block recovery requirements and the workflow for restoring missing markers. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
c290dee945 |
fix(vm-instance)!: refuse resources that cannot size the VM
resources.cpu and resources.sockets are typed as quantities, but they land in domain.cpu.cores and domain.cpu.sockets, which KubeVirt declares as uint32. The chart cast them with int64, which turns 500m, 1.5 or 1e1 into 0 without an error, and KubeVirt boots a zero core count as one core. The user asked for half a core and got a one-core VM with nothing reporting it. The raw spelling is now decoded as YAML, the way an integer field reads it, and the render stops unless the result is a positive whole number that fits in uint32. A leading zero is refused, because YAML reads 010 as octal 8. The check keys on presence rather than truthiness, so an unquoted 0 is refused instead of being read as unset. Memory gets the same presence check. A quoted "0" was truthy and rendered requests.memory: "0", while an unquoted 0 was falsy and dropped, so one quantity took two paths. A zero or negative amount now stops the render in both spellings. BREAKING CHANGE: values that used to render now either fail or render differently. A cpu or sockets that does not decode to a plain whole number within uint32 (a millicore, suffixed such as 1k, fractional, zero, negative or leading-zero value), and a zero or negative memory, fail the next upgrade of the release until the value is fixed. This includes cpu or sockets set on its own beside an instanceType, which used to be ignored whatever it held. A spelling that the int64 cast truncated to 0 but that YAML decodes to a whole number, such as the exponent 1e1 or the trailing dot 2., used to boot one core and now sizes the VM with the count it spells, so such a VM changes size on upgrade. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
89da4a121c |
fix(cdi): stop make update from deleting first-party templates (#4097)
## What this PR does `make update` in `packages/system/kubevirt-cdi` began with `rm -rf templates` and then refetched one file, `cdi-cr.yaml`. Nothing in that directory is purely vendored. Two of the three manifests, the upload-proxy Ingress and TLSRoute from the Gateway API work, are ours and no fetch recreates them, so the next CDI bump would have dropped upload-proxy exposure from the chart and still exited 0. The third is `cdi-cr.yaml` itself, which despite its name carries Helm templating, the `ExpandDisks` gate, a toleration and the two RBAC documents that preauthorize cloning from `cozy-public`; the fetch overwrites it, and removing the wipe does not change that. That recipe now opens with `mkdir -p templates` and deletes nothing, which is where `packages/system/kubevirt-operator` landed at the last KubeVirt bump. The wipe bought nothing there anyway: `wget -O` truncates the file it writes. `kubevirt-cdi-operator` has the same recipe shape, and the same edit there would be a regression rather than a fix. It applies two patches, and since #3920 moved them to `-p4` they resolve, so a hunk upstream has moved out from under leaves `templates/cdi-operator.yaml.rej`; its `awk -i inplace` step leaves `templates/cdi-operator.yaml.gawk.XXXXXX` if gawk dies abnormally. Helm renders every file under `templates/`, and I reproduced both: the reject fails the package with a YAML parse error, and the gawk temp renders a duplicate object at exit 0. The wipe is what takes both, so removing it for symmetry would trade a latent loss for a live one, and the quieter of the two is the one that survives. Deleting the wipe there wants the recipe restructured to transform outside `templates/` and move the result in once, which is what `kubevirt-operator` does today and what its own comment gives this exact reason for. That is a larger change than this one and belongs on its own; #4383 makes it. Meanwhile the scan below covers the package: I added a first-party file to its `templates/` and the guard reported it, so the day that package grows one, this fails rather than the file being lost. `hack/package-update-templates.bats` guards this across the tree rather than in these two packages. It scans every package Makefile and fails when a recipe that clears its own `templates/` leaves behind a tracked file it never names. Put the removal back into `kubevirt-cdi` and it goes red naming both upload-proxy files. A file counts as named only outside the Makefile's own `NAME` and `NAMESPACE`, however the assignment is written. The match is on the variable name rather than on a list of spellings: the tree already carries three of them, `export NAME=`, the bare `NAME=`, and `NAME := ` in `packages/core/testing`, and the hole is identical in each. Without that, a package called `foo-bar` satisfies the check for its own `templates/bar.yaml` through its identity alone. Nothing the scan reaches is exempted that way as the tree stands, so the exclusion is there for the first package that would be: rename the asset in `kubevirt-cdi-operator`'s recipe and put the removal back, and the guard reports the orphaned template only with the exclusion in place. The two variables are matched by name rather than by a `[A-Z_]+=` shape, because a shape that broad is one unspaced assignment away from swallowing a variable that does name templates, which is how `etcd-operator-crds` names all five of its CRDs. A control test runs the same helpers over a fixture broken the same way, over one whose name swallows a template stem, then over that fixture rewritten to spell the removal with a trailing slash, to take one file instead of the directory, and to drop the removal entirely. Both cases pass under `hack/cozytest.sh hack/package-update-templates.bats`. Two limits, both written into the file's header. The check fires on the consequence rather than the shape, so `rm -rf templates` in a package that does refetch everything stays green, which is what keeps `kubevirt-cdi-operator` green for as long as its recipe wipes. And it only looks at a recipe clearing its own directory: `cert-manager` clears `../cert-manager-crds/templates/*` across the package boundary, which needs the removal's target resolved rather than the wiping package's own, so that directory is unguarded. The other packages that clear their own `templates/` refetch all of it and are untouched here. Two more limits the header names. The scan reads the text of each package's own `update:` recipe, so a removal made elsewhere is out of range: in a prerequisite target, behind an include, or behind a recursive make. `capi-operator`, `clustersecret-operator`, `openbao` and `reloader` write `update: clean <name>-update` and take both recipes from `hack/package.mk`, which removes nothing under `templates/` today. And the glob stops at `packages/*/*/Makefile`. The package Makefiles off that depth are the group aggregators such as `packages/system/Makefile` and the vendored kamaji subcharts, and none of them declares `update`. One behaviour of the matcher worth naming, and deliberately not changed here. `wipe_command` evaluates `/^update:/` ahead of its terminator, so a second `update:` in the same Makefile re-arms the scan instead of ending it, and what that means depends on what sits between the two: adjacent or separated by a blank line, both recipes are read; separated by another target, only the first is. The direction that matters is a false positive rather than a miss. A Makefile whose first `update:` clears `templates/` and whose second does not would be reported by this scan, while make runs only the second, so the package fails over a recipe that never executes. No package in the tree defines `update:` twice today. Three more notes, all non-blocking and none acted on. The header says what the scan leaves uncovered is a recipe clearing someone else's `templates/`; that is the uncovered set for *deletion*, and `kubevirt-cdi` is green under the scan while still losing `cdi-cr.yaml`'s content to the in-place `wget -O` on every run, which the Makefile comment records but the header does not. The identity strip has a false-positive direction the header does not argue: a wiping package writing `templates/$(NAME).yaml` would be reported even though the recipe writes it, which no package does today. And the fixture stages `.gitkeep` with `git add --all`, so a developer whose global excludes list that name would get a red for environment rather than defect; `--force` would remove the dependency. The stem match is generous, and the helper's comment now names the two live shapes. A sibling name: `templates/crds.yaml` next to the existing `templates/crds-experimental.yaml` on `gateway-api-crds`. A mention from an unrelated context: `templates/sidecar.yaml` on `objectstorage-controller`, whose Makefile says `sidecar` across its image targets while its recipe clears `templates/` and writes only `templates/controller.yaml`. I fed both to the helper and both come back exempted; a stem the Makefile never mentions is still reported. The duplicate `test:` target in this Makefile is #4157 and stays there. It sits outside the hunks this diff touches, so removing it here would be reaching past what this change is about. One more note, not a defect. Where the comment points at `kubevirt-operator` as the shape that closes the transient-file class, `packages/system/kubevirt/Makefile` is the closer analogue for the `cdi-cr.yaml` half specifically: its `update` downloads nothing and re-applies the parameterization onto a hand-maintained CR with a per-marker self-check. And the failure message offers a third option, staging into a tmpdir the way `etcd-operator-crds` does, in a parenthetical that reads as a gloss on the option before it. What this PR does not fix, and what does. `make update` here still overwrites `templates/cdi-cr.yaml`, which the Makefile comment says plainly. A wholesale overwrite is loud: upstream's object carries neither `podResourceRequirements` nor `cloneStrategyOverride`, and `tests/importer-resources_test.yaml` and `tests/clone_strategy_test.yaml` pin both, so `helm unittest` goes red. The silent case is a partial hand reconciliation that keeps those two and drops something else, because nothing here pins the `ExpandDisks` gate, the `CriticalAddonsOnly` toleration, the `uploadProxyURL` override or the two RBAC documents that preauthorize tenant cloning from `cozy-public`. #4107, stacked on this branch, stops `update` writing the file at all and adds `tests/local_templates_test.yaml`, which pins those. One limit the header does not name, left alone here. The comment strip is anchored to the start of a line, so a trailing comment on a recipe line survives into the searched text and counts as naming the file it mentions. I confirmed it by feeding `wget ... -O templates/cdi-cr.yaml # local-extra.yaml is written by hand` through the filter. Nothing in the tree is written that way, and the header only claims comment lines are dropped, which is what it does. `sed 's/#.*//'` in place of the `grep -v` closes it if it ever matters. Closes #4028. ### Screenshots No UI change. ### Downstream repositories Walked the trigger map in `docs/agents/contributing.md` against the diff. Two entries come close: the website's "developer tooling (the package `Makefile`s)" line, and ccp's "move or rename anything under `hack/`". Neither fires. `make update` still behaves as the website's development page describes, nothing under `hack/` moved or was renamed, and the two files ccp's skills key on (`hack/package.mk`, `hack/common-envs.mk`) are untouched. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(cdi): `make update` in kubevirt-cdi no longer deletes its first-party templates ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **Bug Fixes** - Updated Kubernetes CDI package updates to preserve existing template files while refreshing downloaded manifests. - Prevented update operations from clearing first-party and vendored template content. - **Tests** - Added safeguards to detect package update recipes that could remove tracked templates without restoring them. - Added Helm unit test support for the Kubernetes CDI package. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
ce35da451f |
docs(api): separate the healthCheckExprs failure modes (#4387)
## What this PR does The `healthCheckExprs` field doc said any bad expression makes the HelmRelease hang until its timeout. That is true for some mistakes and wrong for others, and the text ships in the CRDs, so `kubectl explain` sends people to the wrong place. The doc now lists the cases separately, checked against the controller versions this repo installs (helm-controller v1.5.0, fluxcd/pkg runtime v0.100.2, Helm v4.1.1). An expression that does not parse, an empty `current`, or a duplicate group and kind stall the release right away with reason `InvalidCELExpression`, and no Helm action runs. An expression that errors on the object keeps the wait polling until the timeout with the CEL error in the message. A `current` expression that evaluates but never turns true also runs the timeout out, with no error to point at it. A wrong group or kind leaves the expressions unused. Two details go against the issue text. Reading `status` before the CR's controller writes one errors even inside `has()`, as the issue says, but the object is only Unknown on that poll, and the wait still succeeds once a status shows up. A CRD that is not installed does not hang the wait: Helm fails to build the manifest and the action fails before any wait starts. Doc comments and the regenerated CRD YAML only, no behaviour change. Closes #4154 ### Screenshots No UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note docs(api): describe each healthCheckExprs failure mode separately in the ApplicationDefinition and PackageSource field docs. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Documentation** * Expanded the health-check expression guidance to explain how invalid or duplicate expressions, evaluation errors, expressions that remain false, unmatched resource types, and missing CRDs affect Helm releases. * Clarified that health-check expressions are not evaluated when Helm action waiting is disabled. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
d48d3ecc91 |
test(console): add coverage for enrichSchemaWithEnums (#4186)
## What this PR does backup-utils.ts (in the in-tree console dashboard) had no test file at all, despite sibling files in the same directory (dynamic-options.test.ts, crd-option-sources.test.ts, immutable-paths.test.ts) establishing that convention. Adds backup-utils.test.ts covering enrichSchemaWithEnums: the non-object passthrough, a path with no match in the enum map, a top-level enum attach, a nested one, and that the caller's path array is not mutated (verified by reading the function, it builds a new array via spread on every recursive call rather than mutating the one it receives). Test-only change, no production code touched. Verified with vitest run src/lib/backup-utils.test.ts (5 tests pass) and tsc --noEmit (no new errors). ### Screenshots N/A, test-only change, no UI impact. ### Downstream repositories Walked the trigger map in docs/agents/contributing.md against the diff. This is a single new test file for a pure function, no production code, schema, API, CRD, annotation, or naming changed. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note NONE ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **Tests** - Added coverage for schema enum enrichment, including top-level and nested paths. - Verified that unrelated schemas remain unchanged. - Confirmed unmatched paths and caller-provided path arrays are handled safely. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
b6ed32c441 |
docs(kubevirt): name the disabledFeatureGates entry among unchecked lines
The disabledFeatureGates range renders each gate a user adds through a
`- {{ . }}` line with the same shape as the extraFeatureGates entry, and
no check looks at it either: deleting it from a copy of the CR leaves
`make update` exiting 0 and the configured gate silently stops taking
effect. The comment listed the extraFeatureGates entry alone, so it read
as complete while one uncovered line was missing from it.
Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com>
|
||
|
|
63c9271568 |
docs(kubevirt): name every payload line the tail checks do not cover
The sentence #4254 left behind says the device and CPU payload lines stay outside the marker checks, which reads as if the rest are handled. The extraFeatureGates entry is neither device nor CPU and is not covered either: deleting ` - {{ . }}` under its range on a copy of the CR and running `make update CR_FILE=<copy>` exits 0 and leaves the range wrapped around nothing, with no check firing. The sentence it replaced covered that case. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
|
90a1a947c5 |
feat(kube-ovn): bump kube-ovn to v1.15.26 (#4331)
## What this PR does Bumps kube-ovn from `v1.15.10` to `v1.15.26` (package `cozy-kubeovn` `0.38.0` -> `0.39.0`). The motivation is a cold-start failure mode in the OVN NB/SB raft leader checker. In `v1.15.10`, `checkDBClusterIntegrity` (`pkg/ovn_leader_checker/ovn.go:336`) called `os.Remove` on a healthy local raft DB (`ovn.go:367`) whenever a leader observed fewer members than expected. That count drops below the target transiently during cluster growth, a rolling restart, or recovery after a node address change, so the check could delete a valid DB and leave `ovn-central` unable to elect a leader. `v1.15.26` removes that function entirely, so the DB is no longer deleted. It is a removal of the faulty check, not a grace-period around it. The chart is re-vendored with `make update`, not hand-edited, so the templates match the image: - `charts/kube-ovn` is re-pulled from the `v1.15.26` tag and `patches/mtu.diff` is re-applied; the image build args are regenerated. - This brings the whole v1.15.26 chart: the reworked master-node affinity helpers, the widened kube-ovn CRD schema (`bandwidth.ingress`/`egress` from `integer` to int-or-string, `u2oFeatures` added), and the new `OVN_CENTRAL_MODE` (`cluster`/`single`) support with its `central-svc`, `central-pvc` and `central-hcp-rbac` templates. `OVN_CENTRAL_MODE` defaults to `cluster` (raft on hostPath), so an in-place upgrade keeps the existing topology. - Two vendored patches now included upstream in `v1.15.26` are dropped: `fix-keepvmip-portgroup.diff` (`hasAliveSiblingVMPod`, `pod.go:2437`) and `fix-vmim-scheduling-retry.diff` (scheduling requeue, `kubevirt.go:195`). `fix-vmim-target-pod-retry.diff` is kept: `v1.15.26` still returns nil at `kubevirt.go:215`. The image also picks up `kube-ovn-bfdd-supervisor`, which v1.15.26 adds (`makefiles/build.mk:33`) and upstream's `dist/images/Dockerfile:12` copies into `/kube-ovn`. `pkg/controller/vpc_egress_gateway.go:47` hardcodes that path for the `bfdd` container a `VpcEgressGateway` with `spec.bfd` gets, so a copy that stops at `kube-ovn-controller` ships a container that cannot exec. `hack/check-kubeovn-image-copies.sh` compares what our Dockerfile and upstream's copy into the image, `make update` runs it against the tag it pulls and `hack/check-kubeovn-image-copies.bats` runs it on every CI run, because `make update` otherwise rewrites only the ARG lines and the copy drifts at each bump. The `multus` commit moves the `kube-ovn-cni-plugins-checked-against` marker to `v1.15.26`. `CNI_PLUGINS_VERSION` is `v1.9.1` in kube-ovn's base image at both releases and in multus, so portmap and macvlan stay in lockstep; the marker is the only change. The image ref stays digest-pinned (`repository` + `tag@sha256`), which the promote-retag release contract requires for a cozystack-built image. The digest is carried over from `v1.15.10` as a placeholder and is refreshed to the real `v1.15.26` image by the release-candidate digest-vendoring step; no PR or main job rebuilds it. Verification: `helm unittest .` passes (22 tests), `helm template .` renders clean, the `cni-plugins-staging-contract` and `promote-retag` unit contracts are green, and the image-build `TestVMIMigrationSchedulingRetry` gate passes 6/6 on the patched v1.15.26 tree. > [!NOTE] > `start-db.sh` was substantially reworked upstream between `v1.15.10` and `v1.15.26`. The privileged fork E2E run installs into a sandbox and passes, but the in-tree E2E job is skipped on a fork PR, and a fresh install is not an upgrade. An in-place upgrade on a multi-node control plane (image rebuild plus OVN raft re-convergence) is still untested before merge. ### Screenshots N/A: no UI changes. ### Downstream repositories Walked the trigger map against the diff. The change is confined to `packages/system/kubeovn` (re-vendored chart, image build args, version pins) and a one-line marker in `packages/system/multus`. It does not add, rename or remove a package, does not touch platform values, variants, components, release assets, `ApplicationDefinition` semantics, the Talos version, or any hand-typed CRD schema in a downstream provider. No downstream trigger matches. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(kube-ovn): bump kube-ovn to v1.15.26, which removes the OVN leader-checker integrity check that could delete a healthy raft DB and prevent ovn-central from electing a leader after a node address change or rolling restart ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **New Features** - Added hosted control-plane support for OVN Central with StatefulSet deployment, persistent storage, service exposure, and dedicated RBAC. - Added split-cluster and data-plane-only configuration with external OVN endpoints. - Added configurable TLS, leader election, service, and storage settings. - Enhanced CRDs with overlay-only routing and flexible bandwidth quantities. - **Bug Fixes** - Improved VM migration retries during scheduling and preserved connectivity during live migration. - Improved upgrade handling and service configuration validation. - **Updates** - Upgraded Kube-OVN components and images to version 1.15.26. - Documented required OVN IPsec directory preparation for read-only filesystems. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
0f21d06520 |
fix(dashboard): raise the console nginx header buffers for large OIDC tokens (#4376)
## What this PR does A user whose OIDC access token carries many group claims cannot use the console: nginx answers `400 request header or cookie too large` before the request reaches the apiserver proxy. The config baked into the console image kept the nginx defaults, 1k for `client_header_buffer_size` and four buffers of 8k for `large_client_header_buffers`, while the token arrives as one Cookie header several kilobytes long. A header field has to fit into a single buffer, so the per-buffer size is what decides this. Both directives are now 16k, at the top level of that config rather than inside the server block: a header field read before the `Host` header has selected the virtual server is measured against the default server's buffers, so the same lines inside a server block cover that server only while it stays the default one. Measured in the pinned nginx base image: a 12 KB cookie gets 400 on the old config and 200 on the new one, a 20 KB one still gets 400. `nginx -t` accepts the result. This hop sees more than the browser sent. The gatekeeper in front of it runs with `--pass-access-token=true` and `--pass-authorization-header=true`, so the request arrives carrying the `kc-access` cookie, an `Authorization: Bearer` header and `X-Forwarded-Access-Token`, three separately bounded header fields where the edge saw one. This is the console image only. The platform ingress-nginx controller also runs on the defaults, which is #2853. Worth reading that trace again before fixing it there: the controller logged `upstream_status 400`, so it forwarded the request and the 400 came back from behind the gatekeeper, which is this layer. The check in `hack/console-nginx-header-buffers.bats` reads the config out of the Containerfile heredoc and fails when either directive is missing, below 16k, or no longer ahead of the first server block. That config lives inside an image build, so no chart template and no helm-unittest case can reach it. `make unit-tests` picks the file up on its own. No image reference changes here. CI stamps the console digest. Closes #3113 ### Screenshots No UI change. This is the nginx config in front of the SPA. ### Downstream repositories The diff is the console image's nginx config plus one new `hack/*.bats` file. `cozystack-ui` is archived and the console lives in this repo, so a console change belongs in this PR. Nothing under `hack/` moved or was renamed, and no make target changed behaviour. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(dashboard): the console no longer answers `400 request header or cookie too large` to users whose OIDC access token carries many group claims ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Bug Fixes** * Increased the console’s NGINX request-header buffer capacity to support larger header fields and request headers. * Improved handling of requests with headers that previously exceeded the default buffer limits. * **Tests** * Added automated checks to verify the console’s NGINX header-buffer settings remain correctly configured. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
8c5126ccd9 |
fix(kubernetes): give System-mode tenant OIDC users a UID (#4379)
## What this PR does Users authenticated through `spec.oidc.mode: System` on a tenant Kubernetes cluster now get a UID. The AuthenticationConfiguration the chart renders mapped `username` and `groups` and nothing else, and with no `claimMappings.uid` entry the apiserver resolves such a user to an empty UID. The `X-Remote-Uid` header the tenant control plane publishes then reaches an aggregated API server carrying nothing. The mapping takes the `sub` claim. The username claim is `email`, and the platform's Keycloak realm turns on the UPDATE_EMAIL required action, so that value is one a user changes; `sub` is the account UUID and stays where it is. Users on a cluster that is already running gain a UID where they had none. Tenant RBAC does not notice, because a role binding matches a username or a group. Audit records on the tenant apiserver do carry `user.uid` now, `kubectl auth whoami` prints it, and an admission webhook or extension server inside the tenant that read the empty value reads the subject instead. `CustomConfig` mode stays as it was. An operator-supplied configuration is written verbatim, uid mapping or not, and a unit test pins that the chart adds none of its own. Closes #4166 ### Screenshots Not a UI change. ### Downstream repositories Walked the trigger map against the diff, which touches the tenant chart's OIDC template, its unit tests, `docs/oidc-tenant.md`, and the shared e2e runner library with its bats twin. `values.schema.json` does not change. No values key is added, renamed or removed, no default moves and the version enum is untouched, so the terraform-provider's hand-written schema and its expand/flatten pair stay correct. No package is added or renamed and no `ApplicationDefinition` changes, so the website's app lists and generated reference pages are unaffected, and its tenant OIDC page carries no claim about UIDs that this could make stale. The installer values, the platform values and the variant list are untouched, so the ansible role is unaffected. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note fix(kubernetes): users authenticated through `spec.oidc.mode: System` on a tenant Kubernetes cluster now carry a UID, taken from the issuer's `sub` claim, where they previously had an empty one. Audit records, `kubectl auth whoami` and the `X-Remote-Uid` header that reaches an aggregated API server inside the tenant all show it. RBAC is unaffected: a role binding never matches on a UID. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * System-mode OIDC authentication now provides a stable user identifier based on the account subject. * Existing clusters now expose this identifier in audit records, `kubectl auth whoami`, and to extension servers without changing tenant RBAC behavior. * Custom OIDC configurations continue using operator-defined UID mappings. * **Documentation** * Updated OIDC documentation to explain stable identifiers and their visibility. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
225b639c18 |
fix(cdi): stop make update from overwriting the first-party CDI object
templates/cdi-cr.yaml is ours. Against upstream's bare CDI object it adds Helm templating for cloneStrategyOverride, uploadProxyURL and the worker-pod podResourceRequirements, the ExpandDisks feature gate, a CriticalAddonsOnly toleration, and the two RBAC documents that let a tenant clone from the golden-image namespace. Five of those arrived by hand. The toleration did not: it came in with the first commit, which was byte-identical to upstream v1.58.0, and upstream dropped it at v1.64.0 while this object kept it. That is the same divergence `WebhookPvcRendering` records, running the other way. Either way `wget -O templates/cdi-cr.yaml` was not refreshing a vendored file, it was overwriting a first-party one -- the same loss as the `rm -rf templates` this recipe stopped doing, arriving through the fetch instead of the wipe. What replaces it: the release the object is derived from is pinned rather than resolved from GitHub's releases/latest redirect, and `update` fetches it only to confirm the bytes still hash to a measured sha256. Nothing is written under templates/. The next CDI bump that changes the asset fails that check, which is the point -- upstream moving its own defaults is when the local copy needs a human to reconcile it, not an overwrite. The download survives a mismatch, because reconciling one starts by reading it. RELEASE is v1.66.1, which is the release the operator manifest vendors. ../kubevirt-cdi-operator decides what the platform deploys, and it can move to another release without this file changing. RELEASE is still set by hand rather than derived, because a derived value is not a pin. What `update` adds is a comparison with the cdi-operator image tag that package vendors, failing when the two differ; without it the recipe's closing line would name a release the platform may no longer run. The difference from upstream is stated against v1.66.1 rather than as a standing fact: upstream carried WebhookPvcRendering from v1.63.0 through v1.65.0 and dropped it by v1.66.0, and this object never carried it, so the difference ran both ways for three releases and one way after. The comment says to re-derive it at each bump for that reason. The `test:` target this package needed arrived separately, so what it gains here is the `.PHONY` line that came without: hack/package.mk declares only the targets it defines itself, so a file or directory named test or update beside this Makefile would otherwise make that target up to date and skip the recipe. The package also carried a second, identical `test:` target, so make warned on every invocation in it; that one is gone, and the comment above the remaining target is what should stop another being added. The suite is what makes the local delta checkable rather than described, which is why the comment above `update` no longer lists what the object adds: two copies of that list would diverge, and only one of them can fail. hack/package-update-templates.bats attributed `@#` recipe comments to one named package. The tree writes them in more than one, and this adds another, so the attribution goes; the case below it exercises both spellings without naming who writes which. The header in that file also lost its two-item example of first-party manifests. The list named the two the recipe never wrote, and this change stops it writing `cdi-cr.yaml` as well, so the example would have been short by one the moment it landed. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
65a038caa4 |
docs(api): separate the healthCheckExprs failure modes
The field doc filed every mistake under one outcome, a HelmRelease that hangs until its timeout. helm-controller treats them differently. An expression that does not parse is rejected before any Helm action and stalls the release at once, with a named reason. One that parses but errors on the object keeps the wait polling with the CEL error attached, and a current expression that evaluates cleanly but never turns true runs the wait out with no error at all. A read of status errors until the CR's controller writes one, even inside has(), but the wait survives it. A wrong group or kind silently falls back to the built-in readiness rules, and a CR whose CRD is missing fails the Helm action before the wait starts. The text ships in the CRDs and is what kubectl explain shows, so a reader who cannot check it against the controller source was sent to the wrong place for the parse error and the missing CRD. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
2f5625f0dc |
fix(cdi): stop make update from deleting first-party templates
The update recipe in kubevirt-cdi opened with `rm -rf templates` and then refetched one upstream manifest. The directory keeps two more files -- the upload-proxy Ingress and TLSRoute -- that are written by hand and never refetched, so the next CDI bump would drop upload-proxy exposure from the chart while `make update` still exited 0. The clean slate bought nothing either way: wget -O truncates the file it writes. The recipe now creates the directory with `mkdir -p` and leaves the rest of it alone, which is what kubevirt-operator moved to when it was last bumped. kubevirt-cdi-operator keeps its wipe. The same change there would be for symmetry rather than for a loss, and it is not free: both its patch calls resolve, so a hunk upstream has moved out from under leaves templates/cdi-operator.yaml.rej, and gawk's inplace edit leaves templates/cdi-operator.yaml.gawk.XXXXXX if it dies abnormally. Helm renders every file under templates/, so the first fails the package loudly and the second renders a duplicate object at exit 0. The wipe is what takes both. Removing it wants that recipe restructured to transform outside templates/ the way kubevirt-operator now does, which is its own change. Until then the scan below is what watches that package, with the limit the scan already documents: it reports a tracked template whose stem the Makefile never mentions, so a name that collides with something already written there, templates/ tolerations.yaml against the patches/tolerations.diff line, is exempted. It catches the loss it was written for, not every loss. The bats case scans every package Makefile rather than a pinned list, so a first-party template added under a recipe that clears templates/ fails the commit that adds it instead of vanishing at the next bump. A package's own NAME and NAMESPACE do not count as naming a file, because a package called foo-bar would otherwise vouch for its templates/bar.yaml with nothing writing it. A removal reaching into another package is outside the scan's range, and the header records the case in the tree that this leaves uncovered. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
a75919087e |
fix(opensearch-operator): bound every call to a cluster's HTTP API (#4341)
<!-- Thank you for making a contribution! Here are some tips for you: - Use Conventional Commits for the PR title: `type(scope): description` - Types: feat, fix, docs, style, refactor, perf, test, build, ci, chore - Scopes are not an exhaustive list — pick the most specific scope for the change and extend the list when a genuinely new area appears. Examples: - System components: dashboard, platform, operator, cilium, kube-ovn, linstor, fluxcd, cluster-api - Managed apps: postgres, mariadb, redis, kafka, clickhouse, virtual-machine, kubernetes - Development and maintenance: api, hack, tests, ci, docs, maintenance - Breaking changes: append `!` after type/scope (`feat(api)!: ...`) or add a `BREAKING CHANGE:` footer - If it's a work in progress, consider creating this PR as a draft. - Don't hesistate to ask for opinion and review in the community chats, even if it's still a draft. - Add the label `kind/backport` if it's a bugfix that needs to be backported to a previous version. --> ## What this PR does A call to a cluster's HTTP API has no bound of its own. `NewOsClusterClient` builds its own `http.Transport`, and a fresh transport carries no dial, TLS-handshake or response-header timeout; the config sets no `http.Client`, so there is no timeout there either; the calls the client makes on its own behalf pass `context.Background()`; and the calls that take a context from the caller are handed one with no deadline on it, since nothing on the reconcile path sets one. The `Timeout` field the request types carry is the server-side query parameter: it bounds how long the server waits before answering, which helps only once something answers. Each controller runs a single worker, so one call that never returns stops every `OpenSearchCluster` from being reconciled, and the finalizer on the next deletion waits out its whole termination timeout with nothing in the log to say why. Reported in #4337, measured in #4332. A fourth patch on the image bounds every request the operator's client sends, at two levels. - Every request goes out through a `RoundTripper` that puts a 30s deadline on it. That is the only level that reaches the request opensearch-go builds for itself: before a client's first request the library runs a product check with a `context.Background()` of its own and decodes the body of the answer, and a client is built per reconcile, so that check runs on every one. The deadline cannot be released when `RoundTrip` returns, because the body goes back to the caller still open, so the cancel rides on the body and is released by `Close`, which is how `http.Client` applies its own `Timeout`. - That bounds one attempt. opensearch-go retries a request up to three more times on 502, 503 and 504, and the transport's deadline starts over on each of them, so the calls carry a 30s deadline a second time for the series: the 15 calls in `os_client.go` that request and decode before returning through `requestContext`, and the 28 that go through the `doHTTP*` helpers in `performRequest`. - The transport keeps a 10s dial and a 10s TLS handshake, so an unreachable node fails in a third of the budget with an error that names what went wrong. `ResponseHeaderTimeout` is gone from the transport. It stops counting the moment the headers arrive, so it is no bound on a body that starts and then stops, and at 60s it sat above a request deadline that now covers everything it covered. This bounds the wait, it does not make an unresponsive cluster answer: a call that passes its deadline fails the reconcile, which requeues. The change belongs upstream, and there is no upstream issue for it yet. The Dockerfile entry carries the drop condition the other entries carry. ### Tests Seven, in the package the image's own `go test -race` step already runs: - a call to a cluster that accepts the request and answers nothing returns instead of running forever; - a new client, against a cluster whose product check flushes its headers and then stops, returns instead of running forever; - a request through the operator's transport, to a server that accepts the connection and then says nothing, returns instead of running forever; - a body that arrives with its headers and then stops is abandoned; - a call retried on 503 is bounded as a series rather than per attempt; - a body is still readable after the call that fetched it has returned; - the transport carries the handshake bound by value, and the dial bound through the dialer it is built from. Every bound was checked against the mutation that removes it, and all seven turn a test red: the transport wrapper dropped from the constructor, the deadline dropped from `RoundTrip`, the cancel moved off the body there, the deadline dropped from `performRequest`, one call site reverted to `context.Background()`, and the dial and handshake timeouts dropped in turn. Waits are measured from the test goroutine, so an unbounded call fails the test rather than hanging the run until CI kills it. The silent-server test holds its accepted connections and forces a collection while the call is in flight, because an unreachable `net.Conn` is closed by the collector (`net/fd_posix.go` puts a finalizer on `netFD`) and that turns the silent server into one that resets the connection. The full four-patch sequence applies to a pristine v2.8.0 tree in the glob order the build relies on, with no offsets and no fuzz; `gofmt` and `go vet` are clean; and `docker buildx build images/opensearch-operator` builds the image on linux/arm64 with the `go test -race` step green. ### Screenshots Not a UI change. ### Downstream repositories <!-- Cozystack is upstream for repositories that are NOT kept in sync with it automatically, and nothing in CI compares the two sides, so a change here can break them silently. Which change forces what, and which file to touch, is the trigger map in docs/agents/contributing.md under "Downstream Repositories". Walk it before you tick anything. IF YOU ARE AN AI AGENT OR AN LLM, THIS IS PART OF THE TASK, NOT A FORM TO FILL IN: 1. Walk the trigger map against the actual diff of this PR, file by file. Do not decide from the PR title or from your memory of what you changed. 2. For every repository you tick, open the follow-up PR there and link it on the same line. A ticked box with no link claims work that does not exist, which is worse than an empty box. Search that repository for an open PR or issue covering it first, and link that instead of filing a duplicate. 3. When the follow-up is out of scope, or needs a decision that is not yours to make, open an issue in that repository instead, link that, and say so in the PR body. Do not push a speculative PR into another repository just to fill a line here. 4. Do not tick "No downstream repository is affected" to make the checklist go away. If you are unsure, leave every box empty and say so in the PR body, so a human decides. --> - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: Walked the trigger map against the diff: one comment block in `packages/system/opensearch-operator/images/opensearch-operator/Dockerfile` and one new file in that image's `patches/`. No package added, renamed or removed, no values key, no schema, no enum, no `hack/` file, no make target, no namespace and no `ApplicationDefinition`. ### Release note <!-- Write a release note: - Explain what has changed internally and for users. - Start with the same `type(scope):` prefix as in the PR title - Follow the guidelines at https://github.com/kubernetes/community/blob/master/contributors/guide/release-notes.md. --> ```release-note fix(opensearch-operator): time out calls to a cluster's HTTP API, so one unanswered request no longer stops the operator reconciling ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Bug Fixes** * Added timeout handling for OpenSearch cluster connections, including connection, TLS-handshake, response-header, and request deadlines. * Prevented requests from hanging indefinitely when a cluster is unavailable, unresponsive, or stops returning data. * Ensured response bodies remain readable after the initial request completes when applicable. * Bounded the full request lifecycle, including response-body reads and retried calls. * **Tests** * Added coverage for connection, response, retry, and body-read timeout scenarios. * Enabled race detection for relevant package tests. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
8dfbaa1d66 |
fix(kubevirt-cdi-operator): pin the vendored CDI release
This package decides which CDI the platform runs, but its update recipe took the version from GitHub's releases/latest redirect. Any refresh, including one done for an unrelated reason, could move the deployed CDI and its seven image tags without anyone choosing a release, and the diff carried no version line to review. That version is becoming load-bearing for behaviour, not only for images: logic that enumerates CDI's DataVolume phases is correct against one release. The release is now named in the Makefile, the asset is checked against a digest before anything is written, and a refresh that fails partway leaves the vendored manifest untouched. The digest guards against an asset replaced under its tag; it is not an authenticity check. A test target ties the pin to the tree: helm-unittest reads only the vendored file, so a pin moved without re-running update would otherwise leave every assertion green against the old release. The suite also holds the two local patches and the namespace rewrite that every refresh has to reapply. The pinned release is the one already vendored, and update reproduces templates/ byte for byte. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
ff0b851bbc |
test(vpn): add default render helm unit tests (#4347)
## What this PR does vpn was one of the eight user-facing apps in `packages/apps/` called out in #3631 as shipping with zero helm-unittest coverage. This adds a `tests/` suite pinning the default render and wires the standard `test: helm unittest .` target the sibling charts already use, following the same pattern as #4081, #4074 and #4093. Ran `helm unittest .` locally against the chart, it passes. `make show` needs a live cluster connection through `cozyhr`, which was not available in this environment, so I relied on `helm unittest` for local verification, same as the referenced sibling PRs. ### Screenshots Not applicable, test-only change. ### Downstream repositories Walked the trigger map in docs/agents/contributing.md against the diff: this only adds a test file and a Makefile target inside an existing package, it does not add, rename or remove a package, and it does not touch `values.yaml`, `values.schema.json`, `Chart.yaml` or `README.md`, so none of the listed triggers apply. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note test(vpn): add Helm unit test coverage for the default render ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **Tests** - Added automated validation for the VPN deployment’s default configuration, including replica count, container image, service port, and generated resource naming. - **Chores** - Added a convenient command for running the VPN chart’s automated tests. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
e2464ea788 |
fix(kubernetes): give System-mode tenant OIDC users a UID
The AuthenticationConfiguration the chart renders mapped username and groups only, so upstream resolved every System-mode user to an empty UID and the X-Remote-Uid header the tenant apiserver publishes reached an aggregated API server carrying nothing. Map uid to the sub claim. The platform realm enables Keycloak's UPDATE_EMAIL required action, so the address the username claim carries is mutable and cannot serve as a stable identifier, while sub is the account UUID and survives a change of either. CustomConfig mode is untouched: an operator-supplied configuration is still written verbatim, uid mapping included or not. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
4bf95815a8 |
fix(kubernetes): render the aggregation-layer UID header for tenant OIDC (#3539)
## What this PR does Tenant clusters with `spec.oidc.mode: System` or `CustomConfig` authenticate users fine, but a UID does not survive the hop to an aggregated API server. The tenant kube-apiserver publishes `requestheader-uid-headers` into the `extension-apiserver-authentication` ConfigMap only when the flag is set, and the chart never set it. The aggregation layer still sends `X-Remote-Uid`, but the extension server trusts only the header names published in that ConfigMap, so it ignores the one it gets and the call arrives without a UID. The field documentation even told operators to add the flag by hand via `controlPlane.apiServer.extraArgs`. It forwards a UID rather than creating one. ServiceAccount tokens carry one, and for those the aggregation hop starts working. Users authenticated by `spec.oidc.mode: System` still have none, because the generated AuthenticationConfiguration maps `username` and `groups` only; giving them one means mapping a claim, which changes the identity of users who have none today, and is tracked separately. The chart now renders `--requestheader-uid-headers=X-Remote-Uid` on v1.32 and newer, and adds `--feature-gates=RemoteRequestHeaderUID=true` on v1.32, where the gate is still alpha and the apiserver rejects the flag without it. From v1.33 the gate is beta and on by default, so only the header flag is rendered. v1.31 gets nothing: the flag does not exist there, and writing it by hand stops the apiserver from starting. `--emulated-version` in the same passthrough moves that decision, because the gate resolves through the versioned spec at the emulated version. Rendering the gate on every version from v1.32 rather than on v1.32 alone was the alternative, and it would remove the migration step entirely, because an opt-out would then drop two entries instead of one and move the entry count by itself. It loses on what it leaves behind: a redundant gate term on every cluster, which stops the apiserver from starting on the day the gate is retired from the known list. The design also prefers rendering over failing for the same reason the fail branches are narrow, since a cluster stranded on a HelmRelease that no longer converges is a worse outcome than one that never gets the UID fix. The chart reads an operator entry the way the apiserver reads it: header list elements matched whole and untrimmed and folded as `EqualFold` folds them, gate names compared exactly, gate values resolved as `strconv.ParseBool` resolves them, `AllAlpha` and `AllBeta` blankets honoured, an empty value treated as no entry. On v1.32 an entry that says nothing about `RemoteRequestHeaderUID` gets a second one carrying the operator's own terms plus `RemoteRequestHeaderUID=true`. Carrying those terms into the merged copy is what makes it land correctly whether the tenant control plane collapses duplicate flags into the last one or hands both to the apiserver, which merges them in the order it reads them. Tests cover the render matrix over mode, version and operator input: every fail path with its exact message, the ownership and merge paths, duplicate entries in both orders, blanket gates, empty values, and case variants on the header name and on the gate value. The latest-version tenant lane creates its tenant with `spec.oidc.mode: System` and asserts the flag on the rendered KamajiControlPlane, so the tenant apiserver starts with the flag in CI. Nothing asserts the UID arriving at an aggregated apiserver; that needs an extension server inside the tenant and is not in this change. The layer where the count-keyed reset actually bites is the tenant Deployment's arguments, and asserting there needs a live tenant control plane, so it is not in this change either. The rule this follows is that a configuration which renders and boots today keeps rendering. Both flags are new, so an `extraArgs` shape reaching this code was rendering before it existed, and stranding a running tenant on a HelmRelease that no longer converges is a worse outcome than one that never gets the fix. A few shapes do stop rendering, and reaching any of them takes writing `--requestheader-uid-headers` into the passthrough by hand, attempting exactly what the chart now does and getting it wrong; in each the kube-apiserver fails option validation and never starts, so nothing that was working is lost. `docs/oidc-tenant.md` covers these shapes. One known limitation is in there and worth naming here: on v1.33 and newer, adding the documented opt-out is count-neutral in `extraArgs`, and so is removing it again, and on v1.33 and v1.34 adding or removing `--emulated-version=1.31`. The pinned Kamaji build rewrites a running apiserver's arguments only when that count changes and otherwise keeps every flag that has left the list, so either the header flag stays beside a now-disabled gate or the disabled gate stays beside the header flag, and the apiserver refuses to start. Changing the entry count in the same edit is the mitigation, and the fix belongs to the pin rather than to this chart, tracked in #3541. The paths that need no operator edit are clear: turning the feature on for a default tenant moves the count, and a tenant already carrying the opt-out renders byte-identically before and after. Out of scope: `mode: None` still publishes no UID header even though ServiceAccount tokens carry UIDs. That is pre-existing, and widening the condition changes the render for every default tenant. Tracked separately, along with the claim mapping above. Closes #3377 ### Screenshots Not a UI change. ### Downstream repositories - [x] No downstream repository is affected by this change Checked the trigger map against the diff: no package added or removed, no schema field, enum or default changed (description text only), no ApplicationDefinition surface touched, no hack/ layout moved. The managed-apps reference page picks up the new field description through release-time README regeneration. ### Release note ```release-note fix(kubernetes): tenant clusters with `spec.oidc.mode` set to `System` or `CustomConfig` now render `--requestheader-uid-headers=X-Remote-Uid` on the tenant kube-apiserver, plus the `RemoteRequestHeaderUID` feature gate on v1.32, so that an aggregated API server can read the caller's UID out of the request headers. Without that flag the tenant apiserver never publishes `requestheader-uid-headers`, and an aggregated API server ignores the UID header even for callers that have one, ServiceAccount tokens among them. It forwards a UID rather than creating one: users authenticated by `spec.oidc.mode: System` still have none, because the generated AuthenticationConfiguration maps `username` and `groups` only, and that is tracked separately. Adding the flag by hand through `controlPlane.apiServer.extraArgs` is no longer necessary, and an entry of your own is respected: the chart steps aside when yours already carries `X-Remote-Uid` or already enables the gate, merges `RemoteRequestHeaderUID=true` into a copy of a v1.32 `--feature-gates` entry that says nothing about the gate, and renders neither flag when you switch the gate off. The render fails where a `--requestheader-uid-headers` list of your own would stop the kube-apiserver from starting anyway: one that omits `X-Remote-Uid`, one with an empty element, and a list of your own while the gate is off. On v1.33 and newer there is a migration step, and it applies in both directions: the pinned Kamaji build rewrites a running apiserver's arguments only when the number of `extraArgs` entries changes, and otherwise keeps every flag that has left the list. Adding the documented opt-out keeps that number the same, so the header flag already on the Deployment stays beside the now-disabled gate. Removing the opt-out later keeps it the same too, so the disabled gate stays on the Deployment beside the header flag the chart renders again, although your spec no longer shows it. Adding or removing `--emulated-version=1.31` has the same shape both ways on v1.33 and v1.34. The apiserver refuses to start in each case, so change the entry count in the same edit. ``` |
||
|
|
48058dcc74 |
build(opensearch-operator): run the patched tree's tests under -race
The timeout tests drive a listener from one goroutine and inspect what it accepted from another. The plain run passes an unsynchronised access there, so nothing in this repository would catch one. The builder image carries cgo and gcc, and the package images are built natively on x86-64 runners, so the detector is supported where this runs. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
1a2c87635a |
fix(opensearch-operator): bound every call to a cluster's HTTP API
Upstream gives the operator's calls to a cluster no deadline of any kind. The transport it builds carries no dial, handshake or response-header timeout, no http.Client is configured, the calls the client makes on its own behalf pass context.Background(), and the ones that take a context from the caller are handed one with no deadline on it. A cluster that accepts a connection and then says nothing holds such a call for as long as the process lives, and with one worker per controller that single call stops every OpenSearchCluster from being reconciled. The deletion that then waits out its whole termination timeout is the visible end of it. The bound goes on the RoundTripper, the one level every request passes through, the ones opensearch-go builds for itself included: before a client's first request the library runs a product check that carries a context.Background() of its own and decodes the body of the answer, and a client is built per reconcile, so that check runs on every one. The deadline cannot be released when RoundTrip returns, because the body goes back to the caller still open; it rides on the body and is released by Close, the way http.Client applies its own Timeout. That bounds one attempt. opensearch-go retries a request up to three more times on 502, 503 and 504 and the transport's deadline starts over on each, so the calls carry a deadline a second time for the series: through requestContext where the call decodes the answer before it returns, and through performRequest where the still-open body goes back to the caller. The dial and the TLS handshake keep a shorter bound of their own, so an unreachable node fails in a third of the budget with an error that names what went wrong. Each of those bounds has a test that fails when it is removed. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
08bbed3fb5 |
feat(talos-log-collector): add talos-log-collector package (#3260)
## What this PR does Adds `talos-log-collector`, an optional system package: a node-local Vector DaemonSet that receives Talos machine and kernel logs and forwards them to the tenant VictoriaLogs (vlinsert), alongside the container/audit/event logs already collected by monitoring-agents. Talos keeps system and kernel (kmsg) logs inside the OS and does not write them to a host file the Fluent Bit `tail` input could read, so these logs are currently never collected. Vector receives them over the node loopback (Talos pushes to 127.0.0.1:5170). Talos exposes the two streams through independent config paths, and both must point at the loopback socket: `machine.logging.destinations` forwards the JSON-lines service logs, and a `KmsgLogConfig` document forwards the kernel (kmsg) stream (including DRBD kmsg). The node-side setup for both is in the README. Design notes: - The pod stays on the pod network so cluster DNS resolves vlinsert with no extra config. Talos pushes to 127.0.0.1:5170; a `hostPort` bound to `hostIP: 127.0.0.1` publishes that loopback socket into the pod via portmap, keeping the receiver off the host network (no node-wide pod exposure). - The receiver binds inside the pod netns, so a NetworkPolicy is load-bearing: a CiliumNetworkPolicy restricts ingress to the host entity when Cilium is present, otherwise a default-deny-ingress `networking.k8s.io/v1` fallback keeps the socket protected on non-Cilium variants. - Runs non-root, read-only root filesystem, all capabilities dropped. - Optional package (opt-in via `bundles.enabledPackages`): inert until each Talos node is configured to push logs. Node-side setup is in the README. Verified end-to-end on a Talos v1.12 dev cluster: service and kernel logs (including DRBD kmsg) reach VictoriaLogs; pods run non-root with 0 restarts. ### Release note ```release-note feat(talos-log-collector): add talos-log-collector package to collect Talos machine and kernel logs into VictoriaLogs ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added an optional node-local Talos log collector (via system bundle packages) that forwards Talos service and kernel logs over loopback to the platform log ingestion endpoint. * Introduced the collector Helm chart (Vector-based) with configurable log level, loopback TCP receive port, digest-pinned image, default resources, and routing target. * Added conditional Cilium network policy support with a safe deny-by-default fallback. * **Security** * Hardened the collector to run non-root with reduced privileges, read-only filesystem, and dropped Linux capabilities (and disabled service account token automount). * **Documentation** * Documented configuration requirements (including kernel log enablement), operational behavior, and teardown steps. * **Build & Release** * Extended the build to include building the collector’s image. * **Tests** * Added Helm rendering/contract tests covering daemonset, configmap, service account, and network policy. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
47a611cf9e |
docs(kube-ovn): point the update comment at the test that asks for the fixture
The comment said the bats suite compares against "a fixture this step tells you to refresh", but the update step never mentions the fixture: its failure asks you to fix our Dockerfile. The test named "the fixture tracks the vendored chart version" is the one that asks, and it fires after a bump lands. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
4fbef512b4 |
fix(opensearch-operator): name the component reconciler a stall sits in (#4333)
## What this PR does The cluster controller runs nine component reconcilers in sequence, and none of them logs unconditionally when it is entered. The TLS one has a line above its work, but it sits on the early return for a cluster with no security section, which `packages/apps/opensearch/templates/opensearch.yaml` never renders, and the rolling restart one opens at `V(1)`, off at the verbosity the operator ships with. So a call that stops returning leaves nothing behind at all: the operator log ends on whatever ran before it, the object stops being reconciled, and from the outside that is indistinguishable from an operator with nothing to do. That is not hypothetical. Two e2e runs on 2026-09-18 ended that way, and the evidence is the operator's own log, read out of the crust-gather host snapshot each failed run uploads, at `snapshots/opensearch/host/namespaces/cozy-opensearch-operator/v1/pod/opensearch-operator-controller-manager-*/operator-controller-manager/current.log`. In run 35343282947 the operator reconciled `OpenSearchCluster` 27 times on a steady cadence, gaps of 10.2s for almost all of them and 26.5s at the widest. Its last line is at 13:51:33.225Z. helm-controller applied the CR revision that moves the cluster onto the chart CA at 13:51:35Z. Nothing was written for the remaining four minutes, the pod stayed Running and Ready with 0 restarts, and the admin certificate the step was waiting on was never re-minted. Run 35333289958, a different branch and a different operator pod, has the same shape: last line 10:56:35.706Z, Apply at 10:56:38Z, widest gap before that 24.2s, then silence. The securityconfig Job had completed successfully in both, and the cluster itself was quiet. #4332 tracks it. A patch on the image now wraps each component so a call still in flight after a minute reports the component's own name and how long it has been running, and keeps reporting on the same interval while it is stuck. A pass through the components takes seconds on a healthy cluster and the controller requeues itself every 30s, so a minute is well past anything normal. Nothing at all is written while a component behaves, which is why this is a watchdog rather than an entry log: logging every entry would put nine lines per cluster into the log on every reconcile. The finalizer path is deliberately left alone, because every `DeleteResources` at this version returns immediately and a watchdog there could only spawn goroutines for calls that cannot block. The e2e lane already collects that log and nothing in it changes here. #4279 put a `podLogs` leg on the operator's own namespace into the opensearch catch, `namespace: cozy-opensearch-operator`, `selector: control-plane=controller-manager`, `tail: 2000`, and this branch sits on top of it. The other `podLogs` leg takes the cluster's own pods in the test namespace, and cozyreport's per-pod walk keeps only pods that are not Running or not Ready, which a stalled operator is neither, so before #4279 these lines reached the job log only through the crust-gather snapshot. This is a diagnostic, not the fix. Where the reconcile stops is still unknown, and the next occurrence should name it. The Dockerfile comment says to drop the patch once the stall itself is understood and fixed. The new code lives in `pkg/reconcilers`, already covered by the image's `go test` step. Five specs hold it: the wrapped result and error pass through untouched, a call that returns before the threshold is never reported, a call that returns before the threshold also takes the watchdog with it, the report names the component and a moving elapsed while the call is in flight, and the report repeats rather than firing once. Six mutations each fail the spec that owns them: dropping `close(done)`, `time.NewTimer(0)`, an empty component name, a frozen elapsed, a fire-once ticker, and a swallowed result. The full four-patch sequence applies to a fresh v2.8.0 tree in the alphabetical order the build relies on, and builds, vets and tests clean there, with five `-race` runs of the new specs. ### Screenshots Not a UI change. ### Downstream repositories Walked the trigger map against the diff: one Dockerfile comment block and one new patch file under `packages/system/opensearch-operator/images/`. No values key, schema, make target or documented workflow changes. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note NONE ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **New Features** - Added stall monitoring for OpenSearch component reconciliation. When reconciliation remains in progress beyond the configured threshold, the operator logs the component name and elapsed time at regular intervals. - Monitoring remains silent for promptly completed operations and preserves existing results and errors. - **Documentation** - Clarified reconciliation watchdog behavior and documented why certain resource deletion operations are not monitored. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
95b8549238 |
feat(dashboard): brand the token-proxy login page from the console config (#4255)
## What this PR does Part of #4217. Dashboard branding (title, logo) is only reachable through the authenticated dashboard/kube-api path, so the pre-auth surfaces render unbranded. This PR fixes the first of them: the token-proxy login page — the first screen an unauthenticated user sees on a non-OIDC cluster — hardcoded `<title>Login</title>` and had no branding hookup at all. The branding config lives in the `cozy-dashboard-console-config` ConfigMap, which the SPA reads only through the authenticated kube-api. This mounts that same ConfigMap read-only into the token-proxy container and renders its `titleText`, `logoText` and `logoSvg` on the login page, falling back to the historical unbranded page when the file is absent or unreadable so a cluster without branding is unaffected. The SVG is encoded into an `<img>` data URI rather than inlined, which keeps any embedded script inert. The OIDC branch is untouched: its login is served by Keycloak, already branded through the realm login theme. The unauthorized/access-denied screens rendered by the SPA itself (for a logged-in user without kube-api RBAC) are handled in a separate PR. Verified with `go test`, `go vet`, `gofmt`, and `helm unittest` (branding mount asserted present in the non-OIDC branch and absent in the OIDC branch). ### Downstream repositories The diff touches only `packages/system/dashboard` (the in-repo token-proxy image and its chart). No app is added, renamed or removed, no `values.schema.json` / enum / default changes, no CRD or namespace changes, and the `config.json` branding keys are unchanged. Nothing in the trigger map applies. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(dashboard): the token-proxy login page now renders the deployment's branding (title and logo from `branding.titleText` / `branding.logoText` / `branding.logoSvg`) instead of the hardcoded default, so unauthenticated users on non-OIDC clusters see a branded sign-in screen. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment branding to the login page, including a custom title, logo, and heading. * Branding is automatically loaded from the dashboard configuration when available. * Login pages continue to display a default unbranded experience when branding configuration is unavailable or invalid. * **Tests** * Added coverage for branded and unbranded login-page rendering. * Added validation for branding volume mounts across authentication modes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
7d53f7af22 |
fix(dashboard): raise the console nginx header buffers for large OIDC tokens
The nginx config baked into the console image kept the nginx defaults for client_header_buffer_size (1k) and large_client_header_buffers (4 8k). An OIDC access token carrying many group claims arrives as a single Cookie header of several kilobytes, which no longer fits into one buffer, so nginx answered 400 "request header or cookie too large" before the request reached the /apis, /api or /k8s/ upstream. Raise both to 16k, at the top level of that config rather than inside the server block: a header field read before the Host header has selected the virtual server is measured against the default server's buffers, so the same lines inside a server block cover that server only while it stays the default one. Measured against the pinned nginx base image, a 12 KB cookie gets 400 on the old config and 200 on the new one. The ceiling moves rather than disappears: a 20 KB cookie is still rejected. This is the console hop alone. The platform ingress-nginx controller in front of it runs on the same defaults, so where the dashboard is published through an Ingress a token large enough to exceed them is still rejected at the edge; where it is published through the gateway, whose edge has no per-header ceiling of this kind, the console was the hop returning the 400. Raising the controller is a separate change in a separate package. The accompanying check extracts the config from the Containerfile heredoc and fails if either directive is missing, below 16k, or no longer ahead of the first server block: the config lives inside an image build, where no chart template and no helm-unittest case can reach it. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
12e64a99cd |
fix(rabbitmq): right-size the default resources preset to s1.nano (#3936)
## What this PR does
Raises the RabbitMQ default resource preset from `t1.nano` (128Mi
memory) to `s1.nano` (250m CPU / 512Mi memory).
A default-sized RabbitMQ 4.2 broker on Cozystack 1.6.1 was OOMKilled
with exit 137, reached 10 restarts, and never became Ready. A canary on
a larger preset reached 3/3 Ready with zero restarts; its working set
peaked at 125.8Mi. Against the 128Mi `t1.nano` ceiling that is 98% of
the limit in steady state, and cgroup accounting (working set plus page
cache) crosses it under load. The canary and its storage were removed
after validation.
### Sizing
`s1.nano` keeps the CPU of `t1.nano` (250m) and quadruples memory to
512Mi — a 4x margin over the observed 125.8Mi peak.
An earlier revision of this PR proposed `u1.nano` (1Gi). Review
correctly objected that 1Gi reserves 8x the observed working set with no
measured peak to justify it, and asked to either report that peak or
right-size the default. The peak is reported above, and the default is
right-sized to the smallest preset that clears the ceiling with a real
margin rather than to the first one that is comfortably large.
### Upgrade impact
cozystack-api applies OpenAPI schema defaults on the read path and
stores what the client sent: `Get` runs `applySpecDefaults` on its way
out (`pkg/registry/apps/application/rest.go:1232`) and the write puts
`app.Spec` into `HelmRelease.spec.values` (`rest.go:1652`). That splits
existing brokers in two.
**Brokers with no stored `resourcesPreset`** pick up the new chart
default on the next Helm reconcile. For them this upgrade is:
- a rolling restart of every replica, and
- a rise in guaranteed memory reservation from 128Mi to 512Mi per
replica, because the sanitize helper sets memory request equal to limit
— roughly 1.1Gi extra reserved per 3-replica instance.
**Brokers whose values went through a read-modify-write keep `t1.nano`
and are not resized.** `Update` opens with `r.Get` (`rest.go:489`), so a
GET-then-PUT — `kubectl edit` is the unambiguous case, and any client
that reads before writing behaves the same — freezes the schema default
of the moment into the stored values, and a stored value beats the chart
default. Those brokers are not restarted, not resized, and keep hitting
the ceiling this PR raises.
Nothing downstream can separate a deliberate `t1.nano` from one a round
trip baked in, so this is documented rather than migrated. After the
upgrade the affected brokers are the ones that still report the old
preset:
```
kubectl get rabbitmq -A -o custom-columns=NS:.metadata.namespace,NAME:.metadata.name,PRESET:.spec.resourcesPreset
```
The same command before the upgrade tells you nothing: the cozyrd
default is still `t1.nano` then, so the read path fills it in for both
groups. Afterwards, anything reading `t1.nano` carries a stored value;
setting `resourcesPreset: s1.nano` explicitly on the ones that should
move is the fix.
PVCs are untouched, so there is no data loss, but node headroom should
be checked before upgrading.
Also worth knowing when reading the parameter table: the preset does not
only apply to a fully omitted `resources`.
`cozy-lib.resources.defaultingSanitize` merges it key by key, so a
broker pinned to `resources: {cpu: 700m}` keeps its CPU and moves from
128Mi to 512Mi with everyone else. The field descriptions now say so,
and a test pins it.
The values, generated schema, ApplicationDefinition, typed API, and
README all carry the same default. Tests cover the new default, an
explicit legacy override, explicit resources, and a partially set
`resources` map inheriting the preset for what it leaves out.
Validation:
- `helm template` with the chart's `cozy-lib` dependency renders `limits
250m / 512Mi` and `requests 0.025 / 536870912` for the default; an
explicit `t1.nano` renders `128Mi / 134217728`; explicit `700m / 2Gi`
renders `0.07 / 2147483648`. The unit test asserts exactly these values.
- Provider counterpart: cozystack/terraform-provider-cozystack#34.
### Screenshots
Not a UI change.
### Downstream repositories
The default is restated by the Terraform provider, so the linked
provider PR updates it and documents the state-plan implication. No
other trigger-map entry matches this diff.
- [ ] No downstream repository is affected by this change
- [ ] [cozystack/website](https://github.com/cozystack/website) -
follow-up:
- [x]
[cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack)
- follow-up:
https://github.com/cozystack/terraform-provider-cozystack/pull/34
- [ ]
[cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack)
- follow-up:
- [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up:
- [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up:
- [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) -
follow-up:
- [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) -
follow-up:
- [ ]
[cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server)
- follow-up:
- [ ]
[cozystack/external-apps-example](https://github.com/cozystack/external-apps-example)
- follow-up:
- [ ] [cozystack/examples](https://github.com/cozystack/examples) -
follow-up:
### Release note
```release-note
fix(rabbitmq): raise the default resource preset from t1.nano to s1.nano so default-sized brokers are no longer OOMKilled. Brokers with no stored `resourcesPreset` are restarted on upgrade and their guaranteed memory reservation grows from 128Mi to 512Mi per replica; check node headroom before upgrading. Brokers whose values already pin `resourcesPreset`, including ones where a read-modify-write through the API froze the old default into them, keep their old size: list them after the upgrade with `kubectl get rabbitmq -A -o custom-columns=NAME:.metadata.name,PRESET:.spec.resourcesPreset` and set `resourcesPreset: s1.nano` explicitly on the ones that should move. The preset also fills any resource a partially set `resources` leaves out, so a broker pinned to cpu alone moves too. A tenant that opted into `resourceQuotas` and sits near its memory ceiling has the extra reservation rejected by quota admission, which shows up as a StatefulSet that never scales rather than as pods left Pending.
```
|
||
|
|
05b121809c |
feat(dashboard): brand the token-proxy login page from the console config
The dashboard branding (title, logo) lives in the cozy-dashboard-console-config ConfigMap, which the SPA reaches only through the authenticated kube-api. The token-proxy login page — the first screen an unauthenticated user sees on a non-OIDC cluster — had no access to it and rendered the hardcoded default title and heading, defeating branding for customer-facing deployments. Mount that ConfigMap read-only into the token-proxy container and render its titleText, logoText and logoSvg on the login page, falling back to the historical unbranded page when the file is absent or unreadable so a cluster without branding is unaffected. logoSvg is already base64 in the config — the SPA's Logo.tsx consumes it that way — so it is served verbatim through an <img> data URI, never re-encoded, which keeps any embedded script inert. The OIDC branch is untouched: its login is served by Keycloak, already branded through the realm theme. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
|
7d07bbe3ce |
[kafka] Migrate from ZooKeeper to KRaft mode (#2352)
## Summary - Replace ZooKeeper-based Kafka deployments with KRaft (Kafka Raft) metadata mode - Existing ZooKeeper instances migrate automatically and in place via a Helm `pre-install,pre-upgrade` hook Job that drives Strimzi's ZK-to-KRaft migration state machine - New instances deploy directly in KRaft mode with broker and controller `KafkaNodePool`s - The node pools are owned by the migration hook, not by regular chart manifests (see "Why the pools are hook-managed") - Kafka version is user-configurable (v3.9 default, v3.8 available) - Strimzi operator is unchanged in this PR (stays at 0.45.1-rc1); 0.45.x is the last line that supports ZooKeeper→KRaft migration - ZooKeeper removed from the dashboard UI (ApplicationDefinition) ## Migration strategy Both fresh installs and ZooKeeper→KRaft migrations are driven by a single Helm hook Job (`templates/migration-hook.yaml`, `pre-install,pre-upgrade`) that owns the `KafkaNodePool`s. On every install and upgrade the Job: 1. Ensures both node pools exist (idempotent): a broker pool named exactly `kafka` for a migrating cluster — so Strimzi adopts the existing `<cluster>-kafka-N` brokers and their PVCs in place — or `b-<hash>` for a fresh cluster, plus a controller pool `c-<hash>`. The controller pool pins `strimzi.io/next-node-ids` above the broker range so the broker pool keeps node IDs `[0..N-1]` and Strimzi cannot hand the existing broker IDs to the fresh controllers. The shared `kafka` name is claimed atomically (via `kubectl create`) so only one migration per namespace can win it. 2. Inspects the Kafka CR: no CR → fresh install (pools ensured; the main apply then creates the KRaft Kafka CR, nothing to migrate); already `strimzi.io/kraft=enabled` or `status.kafkaMetadataState: KRaft` → done; any other read error → fail closed. Otherwise (a ZooKeeper cluster) it migrates. 3. Annotates `strimzi.io/node-pools=enabled` then `strimzi.io/kraft=migration`, polls `status.kafkaMetadataState` through `ZooKeeper → KRaftMigration → KRaftDualWriting → KRaftPostMigration → PreKRaft → KRaft`, and only once a safe state is reached flips `strimzi.io/kraft=enabled`. If it times out in an intermediate state it aborts without finalising, so Helm fails the upgrade and the next reconcile retries from where it left off. Data is migrated in place: brokers keep their node IDs and reuse their existing PVCs, nothing is copied. Migration is one-way — Strimzi has no supported KRaft→ZooKeeper rollback once complete, so lowering the `version` field or rolling the app back to a pre-KRaft chart is unsupported (take a backup first). ### Why the pools are hook-managed The hook must create the pools and walk the migration state machine *before* the main release apply. A resource a hook creates cannot also be a regular chart manifest across the ZK→KRaft boundary: Helm's main apply finds the pool live in the cluster but absent from the previous (ZooKeeper) release revision and aborts with `original object KafkaNodePool ... not found`, leaving the release `failed` even though the cluster migrated fine (reproduced under server-side apply, the helm-controller default). Managing the pools only from the hook avoids that, so `templates/kafkanodepools.yaml` and the deployed-version gate ConfigMap (`templates/version.yaml`) are removed and the pools are applied idempotently by the Job on every install and upgrade. ## Bug fixes included - ZooKeeper `metricsConfig` referenced wrong ConfigMap key (`kafka-metrics-config.yml` instead of `zookeeper-metrics-config.yml`) - ZooKeeper `storageClass` used `kafka.storageClass` instead of `zookeeper.storageClass` - WorkloadMonitor used `.Values.replicas` instead of `.Values.kafka.replicas` - `validateNameLength` now caps a Kafka app name at the KRaft controller pod-hostname budget (`<release>-c-<hash>-<id>` must fit 63 chars), instead of admitting names that later fail the chart render forever ## What's next A follow-up PR will upgrade Strimzi to 0.51.0 and Kafka to 4.2 once all instances are confirmed migrated to KRaft. That PR is already prepared on branch `KRaft-upgrade-strimzi-051`. ## Test plan - [x] `helm template` renders correctly for new KRaft instances (no ZooKeeper refs) - [x] `helm template` with custom values (1 replica, external, topics, v3.8) - [x] Version validation rejects unsupported versions via JSON schema - [x] helm-unittest: 86/86 across 9 suites - [x] `hack/kafka-migration-hook.bats`: 12/12 — the real hook script executed against a stub kubectl (resolution branches, fail-closed reads, atomic collision guard, finalize guard) - [x] Operator template renders with the unchanged Strimzi 0.45.1-rc1 - [x] Live migration on a disposable cluster under server-side apply: fresh install → healthy KRaft, release `deployed`; in-place migration of a 20000-message ZooKeeper cluster → release `deployed`, broker PVCs adopted in place (same UIDs), and the KRaft data byte-for-byte identical to the pre-migration ZooKeeper data (matching sha256 over every `partition:offset:key:value`) ### Release note ```release-note [kafka] Enable KRaft metadata mode with automatic, in-place ZooKeeper-to-KRaft migration. Kafka version is now configurable (v3.9, v3.8). The Strimzi operator is unchanged (0.45.1-rc1). ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added chart-level Kafka version selector (default v3.9) and KRaft-aware node pool rendering with controller storage sizing. * **Updates** * Default Kafka appVersion updated to 3.9.0; operator and image tag defaults aligned to 0.45.0. * Templates now omit ZooKeeper resources and metrics when KRaft is in use. * **Tests** * New Helm unit tests for Kafka CR, node pools, metrics, topics, dashboard mappings, and workload monitors. * **Documentation** * Values, schema, and README updated to document new version and controller storage options. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
ad4ea5c937 |
feat(keycloak): publish only the named realms on the login host (#4363)
## What this PR does `ingress.adminHost` moves the admin console and Administration REST API onto their own hostname and narrows the public login route to `/realms`, `/resources` and `/.well-known`. That `/realms` prefix publishes every realm the deployment has, `master` among them, so the super-admin login page and token endpoint stay reachable from the internet on the login hostname — a brute-force target the admin split was meant to remove. The Keycloak reverse proxy guide marks `/realms/master/` as internal-only. The login route now enumerates the realms that are meant to be public: the platform realm (`authentication.oidc.realmName`, default `cozy`), which every component's issuer URL points at and which is therefore always published, plus whatever a deployment adds in the new `ingress.exposedRealms`. Each realm is published as an exact path plus a prefix carrying the trailing slash. ingress-nginx renders `pathType: Prefix` as a plain nginx prefix location rather than the element-wise match the Ingress API specifies, so a lone `/realms/cozy` would also serve `/realms/cozy-admin` there; the pair bounds the match on the segment and is equivalent to element-wise matching on a conformant controller and on Gateway API. `master` is refused outright — both in `ingress.exposedRealms` and as `authentication.oidc.realmName`, where the guard sits next to the existing realm-name checks so it applies whether or not a separate admin hostname is configured. Naming that realm puts the platform clients, the cluster-admin roles and every end user inside the realm that holds the Keycloak super-admin. This is a path boundary, not a network one. `KC_HOSTNAME_ADMIN` never was a security boundary, `expose-ingress-admin` defaults to the public Gateway/ingressClass, and with `adminHost` unset the login route still serves `/`. Which hostnames the edge accepts and where the admin route attaches decide the rest. **Behavior change**, confined to deployments that already set `ingress.adminHost`: a realm published on the login hostname beyond the platform one now answers 404 until it is listed in `ingress.exposedRealms`. The `master` guard on `authentication.oidc.realmName` breaks nobody, since that parameter has not shipped in a release yet. ### Screenshots Not applicable — no UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: Walked the trigger map against the diff: it touches `packages/system/keycloak` and the realm-name guard in `packages/core/platform/templates/apps.yaml`. No app package, no `packages/core/platform/values.yaml` key the Ansible role sets, no platform variant or component, no `ApplicationDefinition`, no `hack/` layout, no telemetry metric, no vendored chart contract. ### Release note ```release-note feat(keycloak): with `ingress.adminHost` set, the login hostname publishes only the platform realm and any realm listed in the new `ingress.exposedRealms`, keeping the `master` realm login page and token endpoint off the public route. A deployment that serves additional realms on that hostname must list them. `authentication.oidc.realmName` no longer accepts `master`. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **New Features** - Added `ingress.exposedRealms` to control which additional identity realms are reachable through the login hostname. - Login routes now target the platform realm and configured exposed realms with precise realm-specific paths. - Duplicate realm names are handled automatically. - **Bug Fixes** - Prevented publishing the privileged `master` realm. - Added validation for invalid realm names and configurations. - Enforced the gateway route limit, supporting up to 31 published realms. - **Documentation** - Updated configuration guidance for realm exposure and security restrictions. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
176dd78c1a |
feat(dashboard): serve console branding without kube-api access (#4256)
## What this PR does Part of #4217. The SPA fetched its branding (title, logo) only by reading the `cozy-dashboard-console-config` ConfigMap through the kube-api. That read already works for any signed-in user — `console-rbac.yaml` binds `get` on it to `system:authenticated` — but it still depends on the kube-api being reachable and on the apiserver authenticating the session's token. A dashboard login whose token the apiserver rejects (an OIDC session the kube-api does not accept) gets no branding at all. (The unauthenticated login page is a separate surface, branded in #4255.) This mounts that ConfigMap read-only under the nginx web root and serves it at `/branding/config.json`, and reads that static asset first in `loadConfig`, falling back to the kube-api ConfigMap for charts that predate the mount (their static path serves the SPA `index.html`, whose non-JSON body trips the fallback). Branding then resolves with no kube-api call at all, so it renders regardless of whether the apiserver authenticates the session and without the `console-config-reader` RBAC. Because `config.json` is now a static asset reachable by anyone past the proxy, it is restricted to the documented white-labeling keys: the branding map also carries Keycloak-only keys, including `loginThemeImage`, which can point at a private registry. Keycloak reads those from `_cluster.branding` directly. The mount uses an `items` selector so only `config.json` is exposed under the web root. Verified with `pnpm typecheck`, `pnpm test` (7 `loadConfig` cases), `eslint`, and `helm unittest` (mount + `items`, the `config.json` key the mount serves, white-label keys kept incl. `tenantText`, Keycloak-only keys absent). Also validated live on a dev cluster: `console-rbac.yaml` binds the ConfigMap read to `system:authenticated` (`kubectl auth can-i get` this CM as an unbound user → yes; another CM → no), and a throwaway pod on the real console image serving the mounted ConfigMap returns `200 application/json` at `/branding/config.json` while an `items`-excluded key falls through to `index.html`. ### Screenshots No visual regression to show in a static render: this changes where the branding config is fetched from, not how it is displayed. ### Downstream repositories The diff touches only `packages/system/dashboard` (the in-repo console image and its chart). No app is added, renamed or removed, no `values.schema.json` / enum / default changes, no CRD or namespace changes, and the branding keys the SPA reads are unchanged — only the transport (static asset vs kube-api) and a narrowing of which keys are served. Nothing in the trigger map applies. - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: ### Release note ```release-note feat(dashboard): the console serves its branding as a static asset (`/branding/config.json`) read with no kube-api call, so branding renders even when the apiserver does not authenticate the session and without the console-config-reader RBAC; the served file is narrowed to the documented white-labeling keys. ``` |
||
|
|
f4e923aa82 |
docs(kubernetes): restate the apiServer extraArgs contract for OIDC
The extraArgs field documentation told operators to add --requestheader-uid-headers themselves, which the chart now renders whenever OIDC is on. Describe what it renders per version, when it defers to an operator entry, when it merges into one, and that it still refuses to render shapes the apiserver would not start on. The version field says it too: choosing v1.32 is what makes the chart render the feature gate next to extraArgs, and a reader of that field alone would otherwise not learn that the two interact. The package's hack/update-versions.sh writes that description itself on every make update, so it carries the same text, or the next version bump would drop the sentence again. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
d870b392fa |
fix(kubernetes): render the aggregation-layer UID header for tenant OIDC
A tenant kube-apiserver publishes requestheader-uid-headers into the extension-apiserver-authentication ConfigMap only when the flag is set, and the chart never set it. Without that key the request-header authenticator on an aggregated apiserver does not know which header carries the UID and ignores it, so a caller who has a UID is served without one. Operators had to add the flag by hand through the controlPlane.apiServer.extraArgs escape hatch. This forwards a UID the caller already has and does not create one. ServiceAccount tokens carry a UID and gain from it. OIDC users authenticated through spec.oidc.mode: System do not: the AuthenticationConfiguration the chart generates maps username and groups only, and with no claimMappings.uid upstream returns an empty UID (plugin/pkg/authenticator/token/oidc/oidc.go, getUID, read at v0.35.0), so there is nothing to carry. Mapping a claim would give those users a UID and change the identity of users who have none today, which is a separate decision and is tracked separately. The half read rather than run: that an existing UID is lost without the published key comes from the controller writing the ConfigMap and the request-header authenticator consuming it, not from a live cluster. That OIDC users have no UID is unambiguous in the source named above. Render --requestheader-uid-headers=X-Remote-Uid whenever OIDC is on, plus --feature-gates=RemoteRequestHeaderUID=true on v1.32, where the gate is still alpha and the apiserver rejects the flag without it. v1.31 gets nothing: the flag does not exist there and an unknown flag is fatal to the apiserver. The deciding version is the effective one, not the image tag. --emulated-version in the same passthrough moves it down, and the gate resolves at the emulated version through featureSpecAtEmulationVersion (featureSpecAtEmulationAndMinCompatVersion by v1.35), so an emulated 1.32 needs the gate line even on a v1.35 cluster, and below 1.32 the gate is PreAlpha and cannot be enabled at all, which leaves nothing safe to render. Both flags are new, so every extraArgs shape reaching this code was rendering before it existed, and turning one of those into a render error would strand a running tenant on a HelmRelease that stops converging while its control plane carries on. The chart therefore yields to an operator entry that already satisfies the requirement, renders nothing at all when the operator turned RemoteRequestHeaderUID off, and otherwise merges its gate term into a copy of the operator's --feature-gates value. Carrying that value into the merged entry decides the gate whether the tenant control plane collapses duplicate flags into the last one or hands both to the apiserver, which merges them in the order it reads them. Operator entries are read the way the apiserver reads them: header list elements matched whole and untrimmed, folded as EqualFold folds them, and refused when one is empty after trimming, as checkForWhiteSpaceOnly refuses it; gate names compared exactly; gate values resolved as strconv.ParseBool resolves them; blanket AllAlpha and AllBeta honoured; an empty value treated as no entry at all. Each flag is judged by its last entry carrying a value. The apiserver's CSV reader strips quotes the chart does not parse, so quotes on that entry make the chart render nothing, while quotes on an earlier entry the collapse drops do not. The render fails only where a uid-headers list of the operator's describes a control plane that already refuses to start: one that omits X-Remote-Uid, one with an element that is empty after trimming, and any such list while the gate is off. Withholding the chart's own flag rescues none of them, because the flag the apiserver rejects is the operator's. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
34acabae49 |
test(console): add coverage for enrichSchemaWithEnums
backup-utils.ts had no test file despite sibling lib files establishing that convention. Covers the non-object passthrough, no-match case, a top-level enum attach, a nested one, and that the caller's path array is not mutated. Signed-off-by: Akanksha Trehun <akankshatrehun@gmail.com> |
||
|
|
422b6f65ea |
test(vpn): add default render helm unit tests
vpn was one of the remaining user-facing apps with no helm-unittest coverage. Signed-off-by: Akanksha Trehun <akankshatrehun@gmail.com> |
||
|
|
a4547a6fe0 |
test(kube-ovn): compare image copies against upstream's Dockerfile
packages/system/kubeovn/images/kubeovn/Dockerfile is a hand-kept copy of upstream's dist/images/Dockerfile, and `make update` rewrites only its ARG VERSION and ARG TAG. A binary upstream starts shipping therefore does not reach our image on its own, and nothing read the two files together: kube-ovn-bfdd-supervisor went missing that way with the whole suite green. hack/check-kubeovn-image-copies.sh normalizes the COPY instructions of both files and reports either side's surplus. It compares only the stages built FROM kubeovn/kube-ovn-base, because our builder stage clones and patches kube-ovn and its COPY lines have no upstream counterpart, and it treats an empty result as a broken check rather than agreement. `make update` now runs it against the tag it pulls, so the next bump stops on a mismatch, and hack/check-kubeovn-image-copies.bats runs it on every CI run against a verbatim copy of upstream's Dockerfile at the vendored appVersion. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
b59510abe6 |
fix(kube-ovn): ship kube-ovn-bfdd-supervisor in the image
v1.15.26 adds cmd/bfdd_supervisor and builds it as dist/images/kube-ovn-bfdd-supervisor (makefiles/build.mk:33), and upstream's dist/images/Dockerfile:12 copies it into /kube-ovn. Ours, which the comment above its COPY block names as a copy of that file, stopped at kube-ovn-controller. pkg/controller/vpc_egress_gateway.go:47 hardcodes /kube-ovn/kube-ovn-bfdd-supervisor. A VpcEgressGateway with spec.bfd gets a bfdd container that takes the binary as its command (:1014) and probes it for liveness (:1107), from the kube-ovn image itself, so without the COPY that container cannot exec. The vpc-egress-gateways.kubeovn.io CRD ships from this chart, so the path is reachable. v1.15.10 has neither the binary nor the container, so this arrives with the bump rather than predating it. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
78f01d5542 |
docs(rabbitmq): point the preset section at the shared size matrix
The preset table in this README listed the seven legacy aliases only, and its CPU column disagreed with cozy-lib on every row, so a reader looking up what the new s1.nano default buys them found neither the name nor a correct number. Nine app READMEs already replaced that table with the two paragraphs that describe the <series>.<size> convention and link the full matrix in docs/operations/resource-presets.md; this README now carries the same text. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
|
6d5666f7e6 |
fix(rabbitmq): describe the preset as filling what resources leaves unset
cozy-lib merges the preset under resources key by key, so a partially set resources map still takes the preset for everything it omits: with resources.cpu=700m alone the broker renders 700m of CPU against the preset's 512Mi of memory, and this upgrade moves that broker from 128Mi to 512Mi as well. The description said the preset applies when resources is omitted, and cozyvalues-gen copies it verbatim into values.schema.json, the README parameter table and the cozyrd openAPISchema the dashboard renders, so one sentence made the claim on three surfaces. The suite covered a fully omitted resources map and one that sets both cpu and memory, which is the one shape that does not exercise the merge. The new case pins it: reverting defaultingSanitize to replace the preset instead of merging over it turns that case red and leaves the other three green. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
|
03394bd5fe |
chore(rabbitmq): drop the test target the rebase duplicated
main already carries a test target at the bottom of the Makefile; the rebase kept the earlier copy at the top and GNU make warns about the override. The Makefile matches main again. Assisted-by: LLM Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> |
||
|
|
cf749988a4 |
fix(rabbitmq): right-size the default resources preset to s1.nano
Signed-off-by: Yan Bondarenko <202671653+yankawai@users.noreply.github.com> Assisted-by: LLM |
||
|
|
6a34c9f037 |
fix(opensearch-operator): name the component reconciler a stall sits in
The cluster controller runs nine component reconcilers in sequence and none of them logs unconditionally when it is entered: the TLS one's only line above its work sits on the no-security early return, which the chart in this repository never renders, and the rolling restart one opens at V(1), off at the verbosity the operator ships with. So a call that stops returning leaves nothing behind at all. The operator log ends on whatever ran before it, the object is silently no longer reconciled, and from the outside that is indistinguishable from an operator with nothing to do. Two e2e runs ended exactly that way, the operator going quiet at the moment the chart rewrote the CR and never coming back: https://github.com/cozystack/cozystack/issues/4332. Each component is now wrapped so a call still in flight after a minute reports its own name and how long it has been running, and keeps reporting on that interval while it is stuck. A single line dated at the start of a stall does not answer the question a reader has five minutes in, which is whether the call is still there. Nothing is written while a component behaves, so a healthy cluster costs no extra lines. The finalizer path is left alone: every DeleteResources at this version returns immediately, so a watchdog there could only spawn goroutines for calls that cannot block. A diagnostic rather than a fix: drop it once the stall itself is understood. Assisted-by: LLM Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
bad152443e |
fix(kafka): correct the stale co-namespaced migration render error
The brokerPoolName render guard still told operators to "migrate one at a time or use separate namespaces" when a sibling cluster owned the shared "kafka" pool. That predates automatic name freeing: the migration hook now drains the first cluster off the shared pool with a Cruise Control rebalance and releases the name, and the waiting cluster's HelmRelease retries into it — every co-namespaced Kafka reaches KRaft, no manual action required. Reword the fail message and the helper comment to describe the transient wait-and-retry, and update the unit test's error pattern to match. Signed-off-by: Alexey Artamonov <aleksei.artamonov@aenix.io> |
||
|
|
1c88014661 |
fix(installer): keep node_modules out of the packages artifact (#4290)
## What this PR does `flux push artifact` walks the whole `packages/` tree and reads neither `.gitignore` nor `.sourceignore`, so a working copy where somebody ran `pnpm install` under the vendored console ships the console's dependency tree inside the bundle. Helm then refuses the dashboard chart on every cluster that pulls it, because one dependency file sits above the 5MB per-file limit, and the build itself reports nothing: ```text Could not load chart: decompressed chart file "dashboard/images/console/node_modules/.pnpm/@rolldown+binding-darwin-arm64@1.0.0-rc.15/node_modules/@rolldown/binding-darwin-arm64/rolldown-binding.darwin-arm64.node" is larger than the maximum file size 5242880 ``` Passing `--ignore-paths` replaces flux's built-in list rather than extending it, so the defaults are restated alongside `node_modules/`. `hack/check-packages-artifact-ignores.bats` holds both halves: dropping `node_modules/`, dropping one of the defaults, or declaring the variable without passing it to the recipe each turn the test red. Its second case re-reads the defaults out of the installed flux, so an upstream addition surfaces as a failure rather than as a pattern quietly missing from the artifact. Measured on a tree with the console's dependencies installed: the artifact goes from 80MB carrying 32397 `node_modules` entries to 6.7MB carrying none, with the dashboard chart still in it. ### Screenshots Not a UI change. ### Downstream repositories - [x] No downstream repository is affected by this change The two workflows that push the same artifact themselves (`e2e-fork.yaml`, `nightly.yaml`) run from a clean CI checkout, where the tree has no `node_modules` to pick up. ### Release note ```release-note fix(installer): the packages OCI artifact no longer picks up node_modules from a developer's working copy, which made the dashboard chart unloadable on every cluster that pulled the bundle. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **Bug Fixes** * Package artifacts now exclude unnecessary files, including version-control metadata, common media and archive formats, and dependency directories. * This helps prevent oversized files from exceeding Helm’s per-file size limit. * **Tests** * Added validation to ensure package artifact ignore patterns remain complete and aligned with the packaging tool’s defaults. * Optional checks report when the packaging tool is unavailable without failing the test suite. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
a8c4119050 |
fix(multus): move kube-ovn CNI plugins marker to v1.15.26
The cni-plugins-staging-contract test pins the kube-ovn release whose CNI_PLUGINS_VERSION was last checked against multus's, and bumping kube-ovn to v1.15.26 trips it while the marker still reads v1.15.10. kube-ovn v1.15.26's base image (dist/images/Dockerfile.base) still uses CNI_PLUGINS_VERSION=v1.9.1, identical to multus, so portmap and macvlan stay in lockstep across the two daemonsets. Only the marker moves; the plugins pin and per-arch checksums are unchanged. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
75eebb5f3c |
feat(kube-ovn): bump kube-ovn to v1.15.26
Update kube-ovn from v1.15.10 to v1.15.26. v1.15.26 removes the checkDBClusterIntegrity check from the OVN leader checker (pkg/ovn_leader_checker/ovn.go). In v1.15.10 that check called os.Remove on a healthy local raft DB whenever a leader observed fewer members than expected (ovn.go:367). That count drops below the target transiently during cluster growth, a rolling restart, or recovery after a node address change, so the check could delete a valid DB and leave ovn-central unable to elect a leader. The function is gone in v1.15.26, so the DB is no longer deleted. The chart is re-vendored with `make update`, which re-pulls charts/kube-ovn from the v1.15.26 tag, re-applies patches/mtu.diff, and regenerates the image build args. This brings the full v1.15.26 chart: the reworked master-node affinity helpers, the widened kube-ovn CRD schema (bandwidth ingress/egress become int-or-string, u2oFeatures added), and the new OVN_CENTRAL_MODE (cluster/single) support with its central-svc, central-pvc and central-hcp-rbac templates. OVN_CENTRAL_MODE defaults to cluster (raft on hostPath), so an in-place upgrade keeps the existing topology. Two vendored patches are dropped as now upstream in v1.15.26: fix-keepvmip-portgroup.diff (hasAliveSiblingVMPod, pod.go:2437) and fix-vmim-scheduling-retry.diff (scheduling requeue, kubevirt.go:195). fix-vmim-target-pod-retry.diff is kept: v1.15.26 still returns nil at kubevirt.go:215. The image ref stays digest-pinned (repository + tag@sha256), which the promote-retag release contract requires for a cozystack-built image. The digest is carried over from v1.15.10 as a placeholder and is refreshed to the real v1.15.26 image by the release-candidate digest-vendoring step; no PR or main job rebuilds it. Signed-off-by: IvanHunters <xorokhotnikov@gmail.com> |
||
|
|
b18281ef0c |
feat(dashboard): serial console for virtual machines, and paste into the VNC console (#4356)
## What this PR does Adds a serial console tab to the VM detail page, and makes the VNC console accept a paste. Moving text into a VM was the starting point, and the two consoles answer it very differently. The VNC console carries pixels and key events and nothing else, so a paste there has to be typed, one emulated key press per character. The serial console carries text, so a paste is a single write and the guest's output is real text the user can select and copy. Measured on a running VM, 1000 characters, checked by piping the pasted string through `md5sum` in the guest and comparing with the digest computed locally: | | time | integrity | | --- | --- | --- | | serial console | **0.87 s** | digest matched | | VNC, 25 ms per key event | 56.6 s | digest matched | | VNC, no pacing | 10.3 s | **characters dropped and reordered** | The VNC rows were taken by driving the typing loop directly rather than through a real keypress, so they measure the typing and not the shortcut. The pacing is the measured floor either way: with none, the guest loses and reorders characters. ### Serial console New tab backed by KubeVirt's `virtualmachineinstances/console` subresource and xterm.js. A VM's tabs now lead with its two consoles — serial first, labelled Console, with VNC beside it — because reaching a console is why people open a VM. VNC keeps its place: the serial port does not reach a desktop session, a bootloader, or a Windows guest, and Windows guests are supported here, down to their own scheduling in the VM charts. Copy stays on the terminal's own chord, Ctrl+Shift+C or Cmd+C, so a plain Ctrl+C still interrupts the foreground process. Paste needed one thing handled, and only off a Mac: xterm turns Ctrl with a letter into a control byte and cancels the keydown, so Ctrl+V never reached the browser's paste and the guest received SYN (0x16) instead. Reproduced on a real terminal, where the shortcut put a single `0x16` on the wire and nothing else. The key handler now returns that chord to the browser, at the cost of the terminal's quoted-insert. On a Mac the browser pastes on Cmd+V, so there the terminal keeps the key. One detail worth knowing before touching this code: virt-api negotiates the `plain.kubevirt.io` subprotocol and reads **binary frames only**. A text frame is accepted by the socket and then silently dropped, which is indistinguishable from a dead console. That is why the stream is a small module of its own with its own tests, rather than xterm's stock attach addon, which sends text. ### Paste in the VNC console The graphical console still matters where the serial port cannot reach — a desktop session, a bootloader, Windows — so a paste works there too, typed key by key. **The shortcut is the platform's own: Cmd+V on macOS, Ctrl+V everywhere else.** That means Ctrl+V no longer reaches the guest on Linux and Windows, where it is visual block in vim or the guest's own clipboard. Taking both chords bought nothing, because no browser pastes on Ctrl+V on a Mac, and cost the guest a key it has its own use for. Nothing is added to the interface: the toolbar's existing status line reports `Pasting 12/270` while the text goes in, then returns to the connection state. Four constraints shaped the rest, each found by running it rather than by reading: - `navigator.clipboard.readText()` puts a permission prompt in front of **every** paste. Instead the shortcut moves the focus to a hidden field and lets the browser paste into it, which costs nothing and asks nothing. - noVNC calls `preventDefault()` on keydown. Letting the shortcut reach it would cancel the browser's paste outright, so the shortcut is taken on the capture phase and only its propagation is stopped. If no paste follows, the focus returns to the console instead of being parked in an invisible box. - The paste starts while the user is still holding the chord, and noVNC told the guest that modifier is down the moment it was pressed. Typing into that state sends chords rather than characters — under Ctrl an `m` is Return — so the host's modifiers are released before the first character. On Windows noVNC sits on the first Ctrl for 100 ms and delivers it on a timer, after that release has already happened, so the release is sent once more when the pacing has covered that window. - A character the keymap cannot produce changes what the rest means, and the newline after it still submits: `rm -rf /srv/данные` would become `rm -rf /srv`. Nothing is sent unless the whole paste can be typed, and the toolbar says how many characters were in the way. The keymap covers US only. A guest in another layout is the case the serial console answers, where text travels as bytes and no layout is involved. ### Screenshots The serial console on a running VM: the tabs lead with it, the terminal is live, and the middle line was pasted from the browser clipboard. <img width="2252" height="1606" alt="cozystack-serial-console" src="https://github.com/user-attachments/assets/6fac5f95-c142-405b-9b54-8ed040d65167" /> ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: <!-- The diff touches only packages/system/dashboard/images/console. Walked the trigger map in docs/agents/contributing.md file by file: no entry matches a console-only change, and the map states outright that UI changes belong in this repository, in the same PR. --> ### Notes for the reviewer - New dependencies: `@xterm/xterm` and `@xterm/addon-fit`. The tab is split at the route with `React.lazy`, the way the YAML editor already is, so both land in a 347 KB chunk fetched when a console is opened. Built both revisions with the same `node_modules`: the entry chunk every dashboard page loads goes 935.91 KB → 896.39 KB, so it ends up smaller than before this branch. - The serial console needs a getty on `ttyS0` in the guest. Cloud images enable it by default; a Windows guest or a graphical desktop is the VNC console's job. - The serial console opens with the user's own identity — nginx forwards the session's `Authorization` untouched — and `virtualmachineinstances/console` is already granted next to `/vnc` in `cozy:tenant:use:base`, so no RBAC change is owed. - Verified against a live VM on a dev cluster: connection, typing, a 1000-character paste round-tripped through `md5sum` on the serial console, text typed before the serial socket opens (held and flushed), a real Ctrl+V on the VNC console arriving intact, and two pastes in quick succession (the second is refused rather than interleaved). - The Windows modifier path is read from the pinned noVNC in `node_modules`, not run: there is no Windows host here. The test fake models that delivery, so the behaviour is at least held by a test. - There is no cancel affordance for a paste in progress. It stops on its own when the session drops or the tab is left, and the toolbar then says how far it got; Reconnect is the manual way out. A length cap is worth adding separately — at 25 ms per character a large clipboard types for a long time. - 418 tests pass; build and typecheck are clean. `eslint .` reports 54 pre-existing problems across twenty files, none of them in the files this PR touches. ### Release note ```release-note feat(dashboard): virtual machines gain a serial console tab, where pasting is instant and the output can be selected and copied. The VNC console now pastes the host clipboard on the platform's own shortcut — Cmd+V on macOS, Ctrl+V elsewhere — typing it into the guest on a US keyboard layout; Ctrl+V no longer reaches the guest on Linux and Windows. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit - **New Features** - Added a serial console for running virtual machines, including terminal input, output, resizing, reconnection, and connection status. - Added clipboard paste support to the VNC console with keyboard-layout handling, progress feedback, and unsupported-character reporting. - Added platform-aware paste shortcuts for macOS and Windows/Linux. - **Improvements** - Console content now loads on demand with a loading indicator. - Added handling for stopped and unsupported virtual machine states. - **Documentation** - Documented keyboard, clipboard, and console testing behavior. <!-- end of auto-generated comment: release notes by coderabbit.ai --> |
||
|
|
938595afe3 |
fix(keycloak): validate the realm list wherever it is set
The list was read only inside the adminHost branch, so a value the chart would refuse — master, a scalar, a name that splits the path — sat in the values unnoticed until someone turned the admin hostname on, and the refusal then landed on the change of authentication topology rather than on the edit that caused it. Build the list on every render and let the branches use the result. Assisted-By: LLM Signed-off-by: Kirill Ilin <stitch14@yandex.ru> |