mirror of
https://github.com/cozystack/cozystack.git
synced 2026-11-21 20:23:39 +09:00
a78bf46efdd1e48bf2d92bb4e50680450d77975b
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
10727c0391 |
test(tests): preserve Bats failure reports during fixture cleanup
Test-level EXIT handlers replace the handler Bats uses for TAP output, so a failed assertion can disappear from the reported test results. Cleanup must preserve those failures before the unit runner changes. Assisted-by: LLM Signed-off-by: Myasnikov Daniil <myasnikovdaniil2001@gmail.com> |
||
|
|
575b41e1cd |
test(hack): let each bats file declare the EXIT traps it still holds
The ban on EXIT-trap cleanup in hack/*.bats was enforced by two lists inside hack/cozyreport.bats: one naming the files known to be clean, one freezing an exact trap count for each file that was not. Both had to be edited from whatever change moved them, and that is where the guard kept failing. A change adding a trap to its own file had to edit a string in a suite it otherwise never touches, so two changes sharing no line still invalidated each other: each stayed green against its own base, git merged both cleanly, and the guard went red only once the second landed. A file arriving with traps hit the same wall from the other side -- the inventory did notice it, since the string it compared was built by scanning the directory, but absorbing it meant an edit in a file nothing in the author's diff pointed at. Replace both lists with a declaration each file makes about itself: one "# EXIT-TRAP DEBT: N" comment, exact rather than a ceiling. A file carrying none must install no EXIT trap, which covers the converted files, the files that never had one, and every file added later. Growing or shedding a trap now fails in the file the change already edits, so two changes that disagree about a count collide textually instead of silently. The declaration is read from the leading comment block, not from anywhere in the file. A .bats file is shell that writes shell, so the same line turns up inside a heredoc, a fixture writer or an expected-output string, where it is data belonging to one test. Reading it there as a statement about the whole file would let an unrelated fixture excuse a real trap, and would do it silently, since nothing in that test's own diff looks like a declaration. A comment block is the region with no interior: stopping instead at the first @test would still read a line out of a helper's heredoc. Not every counted handler is debt. A trap inside an explicit subshell does not replace the bats binary's own, so a test failing inside `( ... )` still prints its `not ok`. hack/e2e-test-openapi.bats kills a backgrounded kubectl proxy that way, and moving the kill to the end of the body would leak a process holding a fixed port. Its declaration records that rather than scheduling a conversion, and because the ratchet is exact, removing the trap fails too -- the count protects the construct. What the count cannot do is tell the two apart: substituting a test-level trap for the subshell one keeps the total at 1 and stays green, which the header states rather than leaves to be found. Counting bounds the keyword and the signal the same way, at any character that cannot be part of an identifier, and matches the signal in either case. Whitespace on the right missed `trap ... EXIT; cd "$tmp"`; whitespace on the left missed `tmp=$(mktemp -d);trap ... EXIT` and `(trap ... EXIT; true)`; upper case missed `trap ... exit`, which bash and dash both install. All are real handlers that scored zero, and the left boundary matters most, since the inventory being replaced had none and caught the semicolon form. A bare word boundary is not enough either way: `bootstrap ` ends in `trap `, and it must keep scoring nothing. A quoted signal counts for the same reason as the rest. Two handlers sharing one line are reported rather than counted, since the count is a count of lines and the second would otherwise arrive without moving the total; splitting the line properly needs a shell parser, a semicolon inside a handler's own action not being a separator, and guessing wrong undercounts -- the one direction a ratchet cannot afford. The scan recurses, so hack/e2e-apps/*.bats is covered rather than sitting one directory below the guard that claims the tree. It reads .bats and nothing else, so a handler arriving through a sourced .sh stays outside it -- hack/e2e-chainsaw/_lib/run-kubernetes.sh installs two, each benign for its own reason rather than by design: one sits in a function declared with `(` and so runs in a subshell, the other in a brace function no @test calls. That boundary is stated in the header rather than papered over. The guard moves to hack/bats-no-exit-trap.bats: its subject is every unit suite under hack/, not the report collector it grew up in. Its fixture helpers assemble the trap keyword and the signal from separate arguments, because the guard scans its own source and a fixture written as a literal would be counted as a real trap in it. Assisted-By: Claude <noreply@anthropic.com> Signed-off-by: Aleksei Sviridkin <f@lex.la> |
||
|
|
7739d1e294 |
feat(multus)!: stage reference CNI plugins from the multus image
Multus-backed NetworkAttachmentDefinitions delegate to the upstream containernetworking reference plugins (bridge, macvlan, ipvlan, ...), and nothing guarantees a node has them in the directory Multus searches. On k3s they live under /var/lib/rancher/k3s/data/cni while Multus and Cilium install into /opt/cni/bin, so a bridge-type NAD fails there with `failed to find plugin "bridge" in path [/opt/cni/bin]`. Bundle 14 of the release's plugins into the multus image and add an install-cni-plugins init container that installs them into the host /opt/cni/bin, mirroring the existing install-multus-binary container. loopback, dhcp, tap and dummy are left out; the Dockerfile records why. Gate it on a new chart value, stageCniPlugins, resolved per bundle and on for both. Talos bundles only bridge, firewall, flannel, host-local, loopback and portmap, so the other ten are missing there exactly as on generic Linux; the four that overlap are rewritten with the same upstream version, v1.9.1 on both sides, rather than an older one. A marker in the image Dockerfile records the Talos release that pin was compared against, and a test holds it to the release the platform ships. multus therefore moves out of system.common-packages into the two variant branches, the way linstor already does for talos.enabled. networking.stageCniPlugins overrides the variant default in either direction. Where staging is on the install is unconditional: a plugin is replaced on every pod recreation, not only when the destination is missing. A destination that is already a directory is reported and left alone, since replacing it is not something this can do safely. Turning the value off afterwards does not undo it; nothing here removes or restores a plugin. The container is not privileged and takes no mount propagation. It runs in the spc_t SELinux domain, without which an enforcing node refuses the write. Each plugin is installed under a temporary name and swapped in with a rename: /opt/cni/bin is shared with cilium and kube-ovn. The plugin tarball is checksummed before extraction. A plugin that cannot be installed is reported on stderr and to /dev/termination-log, and the container still exits 0: Multus stays the node's primary CNI and nothing removes its config, so an init container that never completes would leave the shim with no daemon behind it. The manifest change lives in customize-deployment.patch so it survives make update. BREAKING CHANGE: enabling stageCniPlugins replaces reference CNI plugins in /opt/cni/bin on existing nodes, Talos included -- four of the names it writes are ones the Talos node image also carries. Opt out before upgrading: declining afterwards does not restore what was replaced. Assisted-By: Claude <noreply@anthropic.com> Signed-off-by: Aleksei Sviridkin <f@lex.la> |