# Talos nodes as containers, the L2 half of the e2e substrate experiment.
#
# Sits beside hack/e2e-prepare-cluster.bats' QEMU guests rather than replacing
# them. Addressing, CPU and memory deliberately mirror that file so everything
# downstream -- the MetalLB 192.168.123.200-250 pool, hack/e2e-post-install-prep.sh,
# the chainsaw suites -- is unchanged between the two lanes.
#
# NOT `talosctl cluster create docker`: that wrapper forces a single control
# plane (it has --workers but no --controlplanes), has no --disks, and hides the
# container spec. Compose keeps three control planes, as today.
#
# The contract below comes from siderolabs/talos
# pkg/provision/providers/docker/node.go: PLATFORM/TALOSSKU/USERDATA, privileged,
# seccomp:unconfined, read_only, and the tmpfs + volume layout. Two mounts are
# NOT part of that contract and are mandatory anyway -- see the per-mount notes.

name: cozy-e2e

networks:
  talos:
    driver: bridge
    ipam:
      config:
        - subnet: 192.168.123.0/24
          gateway: 192.168.123.1

x-node: &node
  image: ghcr.io/siderolabs/talos:v1.13.5@sha256:0535cf71b65c8c9fdb0b745e697be174bfe7394ecac7ccb2621caf4a606fc5a6
  privileged: true
  security_opt:
    - seccomp:unconfined
  read_only: true
  stop_grace_period: 30s
  # Matches the QEMU lane's `-smp 8 -m 24576` so neither lane is given more of
  # the runner than the other. Talos reports host capacity in container mode;
  # e2e-container-up.sh counterbalances that with dynamic kubelet reservations,
  # and e2e-prepare-cluster-container.bats asserts the resulting allocatable.
  cpus: ${COZY_E2E_NODE_CPUS:-8}
  mem_limit: ${COZY_E2E_NODE_MEMORY_MIB:-24576}m
  tmpfs:
    - /run
    - /system
    - /tmp
  environment: &node-env
    PLATFORM: container
    TALOSSKU: ${COZY_E2E_NODE_CPUS:-8}CPU-${COZY_E2E_NODE_MEMORY_MIB:-24576}RAM
    USERDATA: ${USERDATA:?USERDATA must be set; hack/e2e-container-up.sh generates it}

# The two host binds every node repeats below, and why each is mandatory:
#
#   /dev:/dev       Docker gives a privileged container its own 64 MB tmpfs /dev,
#                   seeded ONCE at creation. /dev/kvm works because it exists at
#                   start, but ZFS zvols created later never appear, and
#                   linstor-csi then fails ControllerPublishVolume with "could
#                   not determine device path". Binding the host devtmpfs fixes
#                   it, and is why `talosctl cluster create docker` can never
#                   support LINSTOR.
#
#   /run/udev       The LINSTOR satellite hostPath-mounts it. In a container /run
#                   is tmpfs with no udev, so the pod hangs Init:0/1 on
#                   "hostPath type check failed: /run/udev is not a directory".
#
# Written out per service rather than shared through a YAML anchor: compose
# merges mappings but not sequences, so an anchored list nests instead of
# flattening and is rejected as "volumes.0 must be a string".

services:
  srv1:
    <<: *node
    hostname: srv1
    container_name: srv1
    environment:
      <<: *node-env
    networks:
      talos:
        ipv4_address: 192.168.123.11
    volumes:
      - /dev:/dev
      - /run/udev:/run/udev
      - srv1-var:/var
      - srv1-state:/system/state
      - srv1-cni:/etc/cni
      - srv1-k8s:/etc/kubernetes
      - srv1-kubelet:/usr/libexec/kubernetes
      - srv1-opt:/opt

  srv2:
    <<: *node
    hostname: srv2
    container_name: srv2
    environment:
      <<: *node-env
    networks:
      talos:
        ipv4_address: 192.168.123.12
    volumes:
      - /dev:/dev
      - /run/udev:/run/udev
      - srv2-var:/var
      - srv2-state:/system/state
      - srv2-cni:/etc/cni
      - srv2-k8s:/etc/kubernetes
      - srv2-kubelet:/usr/libexec/kubernetes
      - srv2-opt:/opt

  srv3:
    <<: *node
    hostname: srv3
    container_name: srv3
    environment:
      <<: *node-env
    networks:
      talos:
        ipv4_address: 192.168.123.13
    volumes:
      - /dev:/dev
      - /run/udev:/run/udev
      - srv3-var:/var
      - srv3-state:/system/state
      - srv3-cni:/etc/cni
      - srv3-k8s:/etc/kubernetes
      - srv3-kubelet:/usr/libexec/kubernetes
      - srv3-opt:/opt

volumes:
  srv1-var: {}
  srv1-state: {}
  srv1-cni: {}
  srv1-k8s: {}
  srv1-kubelet: {}
  srv1-opt: {}
  srv2-var: {}
  srv2-state: {}
  srv2-cni: {}
  srv2-k8s: {}
  srv2-kubelet: {}
  srv2-opt: {}
  srv3-var: {}
  srv3-state: {}
  srv3-cni: {}
  srv3-k8s: {}
  srv3-kubelet: {}
  srv3-opt: {}