mirror of
https://github.com/cozystack/cozystack.git
synced 2026-11-21 20:23:39 +09:00
A quantity such as 512m is 0.512 bytes; the integer cast truncated it, or -512m, to 0, which Redis reads as no limit, so the bound a tenant set could vanish without an error. The operator also sends the directives in list order, and lowering maxmemory below the dataset evicts at once, so the policy has to be set before the bound. Turning snapshots off does not remove an RDB already on the volume, which Redis still loads on restart; the parameter no longer says the data is lost. Assisted-by: LLM Signed-off-by: Mattia Eleuteri <mattia@hidora.io>
301 lines
11 KiB
JSON
301 lines
11 KiB
JSON
{
|
|
"title": "Chart Values",
|
|
"type": "object",
|
|
"properties": {
|
|
"replicas": {
|
|
"description": "Number of Redis replicas. Three Sentinels watch them, or a single one when `replicas` is 1, since a lone pod has no replica to fail over to.",
|
|
"type": "integer",
|
|
"default": 2
|
|
},
|
|
"resources": {
|
|
"description": "Explicit CPU and memory configuration for each Redis replica. When omitted, the preset defined in `resourcesPreset` is applied.",
|
|
"type": "object",
|
|
"default": {},
|
|
"properties": {
|
|
"cpu": {
|
|
"description": "CPU available to each replica.",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
},
|
|
"memory": {
|
|
"description": "Memory (RAM) available to each replica.",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
}
|
|
}
|
|
},
|
|
"resourcesPreset": {
|
|
"description": "Default sizing preset used when `resources` is omitted.",
|
|
"type": "string",
|
|
"default": "t1.nano",
|
|
"enum": [
|
|
"t1.nano",
|
|
"t1.micro",
|
|
"t1.small",
|
|
"t1.medium",
|
|
"t1.large",
|
|
"t1.xlarge",
|
|
"t1.2xlarge",
|
|
"t1.4xlarge",
|
|
"c1.nano",
|
|
"c1.micro",
|
|
"c1.small",
|
|
"c1.medium",
|
|
"c1.large",
|
|
"c1.xlarge",
|
|
"c1.2xlarge",
|
|
"c1.4xlarge",
|
|
"s1.nano",
|
|
"s1.micro",
|
|
"s1.small",
|
|
"s1.medium",
|
|
"s1.large",
|
|
"s1.xlarge",
|
|
"s1.2xlarge",
|
|
"s1.4xlarge",
|
|
"u1.nano",
|
|
"u1.micro",
|
|
"u1.small",
|
|
"u1.medium",
|
|
"u1.large",
|
|
"u1.xlarge",
|
|
"u1.2xlarge",
|
|
"u1.4xlarge",
|
|
"m1.nano",
|
|
"m1.micro",
|
|
"m1.small",
|
|
"m1.medium",
|
|
"m1.large",
|
|
"m1.xlarge",
|
|
"m1.2xlarge",
|
|
"m1.4xlarge",
|
|
"nano",
|
|
"micro",
|
|
"small",
|
|
"medium",
|
|
"large",
|
|
"xlarge",
|
|
"2xlarge"
|
|
]
|
|
},
|
|
"size": {
|
|
"description": "Persistent Volume Claim size available for application data.",
|
|
"default": "1Gi",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
},
|
|
"storageClass": {
|
|
"description": "StorageClass used to store the data.",
|
|
"type": "string",
|
|
"default": "",
|
|
"x-kubernetes-validations": [
|
|
{
|
|
"rule": "self == oldSelf",
|
|
"message": "storageClass is immutable"
|
|
}
|
|
],
|
|
"x-cozystack-options": {
|
|
"source": "storageclass"
|
|
}
|
|
},
|
|
"external": {
|
|
"description": "Enable external access from outside the cluster. Can be enabled only when the instance is created, together with `tls.enabled: true`; turning it on for an existing instance, or changing `tls.enabled` while it is on, is refused at admission.",
|
|
"type": "boolean",
|
|
"default": false
|
|
},
|
|
"version": {
|
|
"description": "Redis major version to deploy. The Redis and Sentinel pods run the same image.",
|
|
"type": "string",
|
|
"default": "v8",
|
|
"enum": [
|
|
"v8",
|
|
"v7"
|
|
]
|
|
},
|
|
"tls": {
|
|
"description": "TLS configuration. TLS is opt-in and is not inferred from `external`.",
|
|
"type": "object",
|
|
"default": {},
|
|
"properties": {
|
|
"authClients": {
|
|
"description": "Maps to the Redis `tls-auth-clients` directive. Defaults to `no` — the server certificate is presented but client certificates are not validated. `yes` requires a client certificate signed by this release's CA, which the platform does not issue. Changing it restarts the Redis and Sentinel pods, because the directive is read from the config file once at startup.",
|
|
"type": "string",
|
|
"enum": [
|
|
"no",
|
|
"optional",
|
|
"yes"
|
|
]
|
|
},
|
|
"enabled": {
|
|
"description": "Enable TLS for Redis and Sentinel connections. Disabled unless set. Enabling it moves Redis and Sentinel to a TLS-only listener, so existing plaintext clients must be migrated at the same time. Encryption is provided by the redis-operator fork that mounts the certificate Secret into both Redis and Sentinel pods at `/tls`.",
|
|
"type": "boolean"
|
|
}
|
|
}
|
|
},
|
|
"authEnabled": {
|
|
"description": "Enable password generation.",
|
|
"type": "boolean",
|
|
"default": true
|
|
},
|
|
"minReplicasToWrite": {
|
|
"description": "Redis `min-replicas-to-write`: the master refuses writes unless at least this many replicas are connected and within `minReplicasMaxLag`. Unset by default, which leaves the Redis default (disabled). With `replicas: 2` and a value of 1 the master rejects writes while its only replica is down, trading availability for a bound on the writes lost if an isolated master is failed over. Replication stays asynchronous, so this bounds the loss, it does not remove it. Must be 0 or more and below `replicas` (a master with `replicas` pods has `replicas - 1` replicas), otherwise every write is refused; the chart refuses such a value.",
|
|
"type": "integer",
|
|
"minimum": 0
|
|
},
|
|
"minReplicasMaxLag": {
|
|
"description": "Redis `min-replicas-max-lag`, in seconds: a replica whose last acknowledgement is older than this does not count towards `minReplicasToWrite`. Unset by default, which leaves the Redis default (10). Has no effect unless `minReplicasToWrite` is set. Must be at least 1 when `minReplicasToWrite` is set: Redis treats 0 as disabling the check, so the chart refuses it.",
|
|
"type": "integer",
|
|
"minimum": 0
|
|
},
|
|
"maxmemory": {
|
|
"description": "Redis `maxmemory`: the dataset size at which Redis applies `maxmemoryPolicy`. Unset by default, which renders `maxmemory 0` (no limit, the Redis default), so a value set by hand with `CONFIG SET` is reset on the next reconcile. Must be at most 90% of the memory request of each Redis pod (from `resources` or `resourcesPreset`): the operator silently drops a larger value, so the chart refuses it. Leave headroom below that for replication and snapshot buffers.",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
},
|
|
"maxmemoryPolicy": {
|
|
"description": "Redis `maxmemory-policy`: what Redis does once `maxmemory` is reached. `noeviction` refuses writes; `allkeys-lru` evicts the least recently used keys, which suits an instance used purely as a cache. Has no effect while `maxmemory` is unset.",
|
|
"type": "string",
|
|
"default": "noeviction",
|
|
"enum": [
|
|
"noeviction",
|
|
"allkeys-lru",
|
|
"allkeys-lfu",
|
|
"allkeys-random",
|
|
"volatile-lru",
|
|
"volatile-lfu",
|
|
"volatile-random",
|
|
"volatile-ttl"
|
|
]
|
|
},
|
|
"snapshots": {
|
|
"description": "Write RDB snapshots to the persistent volume (the Redis `save` directive, with the Redis default schedule). Set to `false` for an instance used purely as a cache: `save \"\"` is rendered and the volume is kept, so no further scheduled snapshot is written while replicas still have room for the full-sync RDB they write to disk. An RDB file already on the volume is not removed, and Redis loads it on restart, so turning snapshots off does not by itself empty the dataset. Always off when `size` is empty.",
|
|
"type": "boolean",
|
|
"default": true
|
|
},
|
|
"sentinel": {
|
|
"description": "Sentinel configuration. When `sentinel.resources` is empty and `sentinel.resourcesPreset` is unset, the Sentinel pods are sized like the Redis pods (`resources` and `resourcesPreset`). An empty `sentinel.resources` map counts as unset, as an empty top-level `resources` does.",
|
|
"type": "object",
|
|
"default": {},
|
|
"properties": {
|
|
"resources": {
|
|
"description": "Explicit CPU and memory configuration for each Sentinel pod. Keys left out are filled from the preset in `sentinel.resourcesPreset`.",
|
|
"type": "object",
|
|
"properties": {
|
|
"cpu": {
|
|
"description": "CPU available to each replica.",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
},
|
|
"memory": {
|
|
"description": "Memory (RAM) available to each replica.",
|
|
"pattern": "^(\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\\+|-)?(([0-9]+(\\.[0-9]*)?)|(\\.[0-9]+))))?$",
|
|
"anyOf": [
|
|
{
|
|
"type": "integer"
|
|
},
|
|
{
|
|
"type": "string"
|
|
}
|
|
],
|
|
"x-kubernetes-int-or-string": true
|
|
}
|
|
}
|
|
},
|
|
"resourcesPreset": {
|
|
"description": "Sizing preset for the Sentinel pods. Defaults to `resourcesPreset`.",
|
|
"type": "string",
|
|
"enum": [
|
|
"t1.nano",
|
|
"t1.micro",
|
|
"t1.small",
|
|
"t1.medium",
|
|
"t1.large",
|
|
"t1.xlarge",
|
|
"t1.2xlarge",
|
|
"t1.4xlarge",
|
|
"c1.nano",
|
|
"c1.micro",
|
|
"c1.small",
|
|
"c1.medium",
|
|
"c1.large",
|
|
"c1.xlarge",
|
|
"c1.2xlarge",
|
|
"c1.4xlarge",
|
|
"s1.nano",
|
|
"s1.micro",
|
|
"s1.small",
|
|
"s1.medium",
|
|
"s1.large",
|
|
"s1.xlarge",
|
|
"s1.2xlarge",
|
|
"s1.4xlarge",
|
|
"u1.nano",
|
|
"u1.micro",
|
|
"u1.small",
|
|
"u1.medium",
|
|
"u1.large",
|
|
"u1.xlarge",
|
|
"u1.2xlarge",
|
|
"u1.4xlarge",
|
|
"m1.nano",
|
|
"m1.micro",
|
|
"m1.small",
|
|
"m1.medium",
|
|
"m1.large",
|
|
"m1.xlarge",
|
|
"m1.2xlarge",
|
|
"m1.4xlarge",
|
|
"nano",
|
|
"micro",
|
|
"small",
|
|
"medium",
|
|
"large",
|
|
"xlarge",
|
|
"2xlarge"
|
|
]
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|