cozystack/packages/apps/postgres/templates/db.yaml

{{- $tlsEnabled := (include "postgres.tls.enabled" .) | eq "true" -}}
{{- $tlsRequired := (include "postgres.tls.required" .) | eq "true" -}}
{{- $autoscaling := (include "postgres.autoscaling.active" .) | eq "true" -}}
---
apiVersion: postgresql.cnpg.io/v1
kind: Cluster
metadata:
  name: {{ .Release.Name }}
  {{- with .Values.bootstrap.newServerName }}
  {{- /* Rendered whether or not the barman plugin is: the CNPG restore driver
         reads it to tell the Cluster its own restore produced from one rendered
         for an earlier restore. */}}
  annotations:
    postgres.cozystack.io/restored-server-name: {{ . | quote }}
  {{- end }}
spec:
  {{- if $autoscaling }}
  {{- /* Under active autoscaling KEDA owns the runtime count via the /scale
         subresource. The chart SEEDS spec.instances at a constant = max(replicas,
         effectiveMin) (postgres.autoscaling.activeSeed) rather than omitting it, for
         three reasons: (1) with synchronous quorum an omitted field defaults to 1 and
         CNPG's webhook rejects "maxSyncReplicas must be lower than the number of
         instances"; (2) omitting it on an EXISTING cluster's enable/upgrade makes
         three-way merge delete the field, CNPG re-defaults to 1, and every replica +
         its PVC is decommissioned before KEDA re-clones (hours with no read replicas);
         (3) seeding effectiveMin ALONE differs from the else-branch (instances:
         replicas), so a dryRun/transition flip would rebase a staged live count down to
         the bare floor. Seeding max(replicas, effectiveMin) equals the else-branch value
         whenever replicas is staged at/above the floor, so those flips render the same
         value and the live count does not dip; it still never undercuts the quorum floor.
         Because the seed is constant, each reconcile renders the value it rendered last
         time, so the client-side patch is empty and never reverts KEDA's higher live
         value. This holds ONLY under client-side apply, where helm-controller patches
         this CRD from the previous-vs-new rendered manifest and does not consult live
         state (it leaves Helm's threeWayMergeForUnstructured at the default): the
         platform's helm-controller (v1.5.0) defaults to SERVER-SIDE
         apply, which force-owns every rendered field and would revert spec.instances from
         KEDA's live /scale value on every reconcile. (Editing replicas / minReplicas /
         quorum.maxSyncReplicas moves the constant, so that one reconcile DOES patch
         spec.instances to the new seed — a documented floor-change caveat, see values.yaml.)
         The postgres ApplicationDefinition
         therefore forces client-side apply via the annotation
         release.cozystack.io/helm-server-side-apply: "false"
         (packages/system/postgres-rd/cozyrds/postgres.yaml), threaded onto the tenant
         HelmRelease's Install/Upgrade.ServerSideApply in
         pkg/registry/apps/application/rest.go (convertApplicationToHelmRelease) and
         guarded by TestConvertApplicationToHelmRelease_ServerSideApplyOverride.
         (Go-template comment, stripped at render.) */}}
  instances: {{ include "postgres.autoscaling.activeSeed" . }}
  {{- else }}
  {{- /* Static-count path (autoscaling off / dryRun / transition), which renders
         instances: <replicas>. CNPG's webhook rejects the Cluster if maxSyncReplicas
         >= instances; guard the DISABLE case in particular, where an autoscaled +
         sync-quorum cluster runs with instances seeded from effectiveMin while
         replicas may sit at its default, so a naive disable would render an invalid
         count and wedge the HelmRelease. Fail closed with an actionable message.
         (Stripped at render.) */}}
  {{- if le (int .Values.replicas) (int .Values.quorum.maxSyncReplicas) }}
  {{- fail (printf "postgres: replicas (%d) must be greater than quorum.maxSyncReplicas (%d) - CNPG rejects a Cluster whose maxSyncReplicas is not lower than its instance count. Raise replicas above maxSyncReplicas. (If you are disabling autoscaling on a synchronous-quorum cluster, first set replicas to at least the live instance count: kubectl scale cluster.postgresql.cnpg.io/%s --replicas=<live count>, with the HelmRelease suspended.)" (int .Values.replicas) (int .Values.quorum.maxSyncReplicas) .Release.Name) }}
  {{- end }}
  instances: {{ .Values.replicas }}
  {{- end }}
  {{- if and $tlsEnabled .Values.external }}
  # Operator-managed TLS. CNPG auto-generates its own self-signed CA and signs
  # server + client + replication certs from it. The operator's default SAN list
  # already covers the three built-in services (rw/r/ro) in four DNS forms each
  # (bare, .ns, .ns.svc, .ns.svc.<cluster-domain>); only the external hostnames
  # need to be appended via serverAltDNSNames.
  #
  # serverAltDNSNames is mutually exclusive with serverTLSSecret per the CNPG
  # admission webhook, which is why the chart no longer renders a cert-manager
  # chain — the operator owns the chain end-to-end.
  #
  # Trust anchor for clients: the key-free "<release>.tenant-ca" Secret the CA
  # extraction controller publishes, as declared by the sentinel in
  # templates/tenant-projection.yaml. Tenants read that Secret through the
  # core.cozystack.io tenantsecrets API. It is neither <release>-credentials,
  # which is chart-rendered and holds user passwords only, nor CNPG's
  # <release>-ca, which holds the CA private key next to ca.crt.
  #
  # The second name is the per-engine one, meant for SNI routing through a
  # TLS-passthrough listener on the tenant Gateway (*.postgres.<apex>). Both
  # are issued so that a later move between the two hostname schemes reissues
  # no certificate and changes no client's trust anchor; clients still change
  # the host they dial.
  {{- $apex := include "cozy-lib.ns-host-required" . }}
  certificates:
    serverAltDNSNames:
      - {{ printf "%s.%s" .Release.Name $apex }}
      - {{ printf "%s.postgres.%s" .Release.Name $apex }}
  {{- end }}
  {{/*
    s3Credentials points at the operator-supplied Secret when
    backup.s3CredentialsSecret.name is set; otherwise it falls back to the
    chart-managed <release>-s3-creds Secret materialised from s3AccessKey/
    s3SecretKey. The override path keeps credentials out of the Postgres
    CR .spec — the CNPG backup driver uses it on restore.
  */}}
  {{- $credCfg := default (dict) .Values.backup.s3CredentialsSecret }}
  {{- $credSecretName := $credCfg.name | default (printf "%s-s3-creds" .Release.Name) }}
  {{/*
    Platform-managed default flow (useSystemBucket=true):
      - The chart does NOT render spec.plugins or the barman-cloud
        ObjectStore. The backup-controller's CNPG driver SSA-applies a
        barmancloud.cnpg.io ObjectStore (carrying destinationPath/
        endpointURL/credentials) and SSA-patches the live Cluster's
        spec.plugins to reference it at first BackupJob time, using field
        manager "cozystack-cnpg-backup-driver" with ForceOwnership (see
        internal/backupcontroller/cnpgstrategy_controller.go
        applyClusterPluginBackup). The postgres HelmRelease is applied
        CLIENT-SIDE (release.cozystack.io/helm-server-side-apply: "false",
        for the autoscaler seed invariant), and Helm's client-side patch
        only diffs fields the chart RENDERS (previous-vs-new manifest);
        since the chart never renders spec.plugins under useSystemBucket, a
        subsequent Flux re-render leaves the driver's SSA+ForceOwnership
        patch intact — no tug-of-war on the live Cluster (the two apply on
        disjoint field sets).
        Coordinates come from a single backupStorage values block in
        the backupstrategy-controller chart. This eliminates the
        endpoint-duplication failure mode (an operator switching the
        platform endpoint would otherwise have to update both the
        backupstrategy-controller and this chart).
      - Consequence: WAL archiving via the plugin is not active until the
        first BackupJob has run. WAL accumulates on the local PVC in the
        meantime — fine for small / fresh clusters, but admins of large
        Postgres releases switching mid-flight should run an ad-hoc
        BackupJob immediately after enabling the flag.
      - The chart-emitted <release>-s3-creds Secret is also skipped, so a
        default install no longer leaks placeholder credentials into the
        tenant namespace.
  */}}
  {{- $destinationPath := .Values.backup.destinationPath }}
  {{- $endpointURL := .Values.backup.endpointURL }}
  {{/*
    accessKeyIDKey/secretAccessKeyKey only apply when an external Secret was
    supplied via backup.s3CredentialsSecret.name. The chart-managed
    <release>-s3-creds Secret materialised by backup-secret.yaml hard-codes
    AWS_ACCESS_KEY_ID / AWS_SECRET_ACCESS_KEY, so applying overrides in
    that mode would point CNPG at non-existent keys and break credential
    reads. Default both names unconditionally and let the override take
    effect only in external-Secret mode.
  */}}
  {{- $credAccessKey := "AWS_ACCESS_KEY_ID" }}
  {{- $credSecretKey := "AWS_SECRET_ACCESS_KEY" }}
  {{- if $credCfg.name }}
  {{- $credAccessKey = $credCfg.accessKeyIDKey | default "AWS_ACCESS_KEY_ID" }}
  {{- $credSecretKey = $credCfg.secretAccessKeyKey | default "AWS_SECRET_ACCESS_KEY" }}
  {{- end }}
  {{/*
    endpointCA references a Secret carrying the CA bundle the barman-cloud
    plugin should trust. Required when the S3 endpoint serves a self-signed
    certificate (the cozystack default seaweedfs-s3 ingress qualifies). The
    same reference flows into both the backup ObjectStore's
    spec.configuration.endpointCA and the recovery ObjectStore's
    spec.configuration.endpointCA (referenced from externalClusters[].plugin)
    so backup *and* recovery can verify TLS - missing it on the recovery
    side made bootstrap.recovery panic in CNPG's instance-manager.
  */}}
  {{- $caCfg := default (dict) .Values.backup.endpointCA }}
  {{- $caKey := $caCfg.key | default "ca.crt" }}
  {{/*
    The barman-cloud plugin is chart-wired only when the legacy path has
    real coordinates:
      - backup.enabled=true AND
      - useSystemBucket=false (platform flow lets the CNPG driver SSA-
        patch spec.plugins + the ObjectStore instead) AND
      - destinationPath is non-empty AND either an inline access/secret
        pair is supplied OR an external Secret reference (s3Credentials-
        Secret.name) is set.
    Anything short of that means the user has enabled backup but not yet
    supplied S3 coordinates — wiring the plugin against a half-empty
    ObjectStore would just feed CNPG a broken archive_command. Tenants
    opting into `useSystemBucket: true` keep spec.plugins unset until the
    backup-controller's CNPG driver SSA-patches it on the first BackupJob.

    The S3/barman settings live in the barmancloud.cnpg.io/ObjectStore CR
    rendered at the bottom of this file (named after the release); the
    Cluster only references it by name. Native spec.backup.barmanObjectStore
    is deprecated in CNPG 1.27 and removed in 1.29. The bare (system-flavor)
    image tags this chart pins still ship the barman-cloud-* binaries the
    native path needs (unlike the `standard` variant keycloak-db pins), but
    the system flavor is deprecated upstream, so this chart moves to the
    plugin as well.
  */}}
  {{- $hasInlineCreds := and (ne (default "" .Values.backup.s3AccessKey) "") (ne (default "" .Values.backup.s3SecretKey) "") }}
  {{- $hasLegacyCreds := or $hasInlineCreds (ne (default "" $credCfg.name) "") }}
  {{- $renderBarman := and .Values.backup.enabled (not .Values.backup.useSystemBucket) (ne $destinationPath "") $hasLegacyCreds }}
  {{- if $renderBarman }}
  plugins:
    - name: barman-cloud.cloudnative-pg.io
      isWALArchiver: true
      parameters:
        barmanObjectName: {{ .Release.Name }}
        # Pin the WAL-archive S3 prefix explicitly (the plugin would default it
        # to the Cluster name anyway); the driver preserves it on a live cluster.
        # On restore bootstrap.newServerName overrides it with a fresh prefix, so
        # the re-bootstrapped cluster does not archive onto the recovery source.
        serverName: {{ .Values.bootstrap.newServerName | default .Release.Name }}
  {{- end }}

  {{/*
    bootstrap.enabled + backup.useSystemBucket is unsupported in this
    chart: bootstrap.recovery requires an explicit externalClusters entry
    with destinationPath / endpointURL / s3Credentials, but useSystemBucket
    deliberately leaves the platform coordinates out of values.yaml (they
    live in the backupstrategy-controller chart). Rendering the bootstrap
    block here with empty coordinates would produce a broken cnpg.io
    Cluster CR and a confusing CNPG bootstrap failure.

    The supported way to restore against the platform bucket is a
    backups.cozystack.io/RestoreJob targeting a fresh Postgres app — the
    backup-controller's CNPG driver SSA-patches the Cluster's
    spec.bootstrap before CNPG sees it. See the BackupClass and Restore
    flow in https://cozystack.io/docs/v1/operations/services/backup-classes/.

    Fail fast at chart-render time so tenants see the misconfiguration
    immediately rather than during a Postgres bootstrap pod crash loop.
  */}}
  {{- if and .Values.bootstrap.enabled .Values.backup.useSystemBucket }}
  {{- fail "postgres: bootstrap.enabled=true is incompatible with backup.useSystemBucket=true. Use a backups.cozystack.io/RestoreJob against the cozy-default BackupClass to restore from the system bucket; see https://cozystack.io/docs/v1/operations/services/backup-classes/." }}
  {{- end }}
  {{/*
    The externalClusters bootstrap block below references $credSecretName
    (default <release>-s3-creds) for recovery. That Secret is only
    materialised by backup-secret.yaml when inline creds are present, so a
    legacy-flow bootstrap with no usable credentials would render a cnpg.io
    Cluster whose recovery s3Credentials points at a Secret that never
    exists — CNPG then crash-loops with an opaque "secret not found".
    Fail closed at render time (mirroring the useSystemBucket guard above)
    so the misconfiguration is obvious immediately. useSystemBucket-mode
    restore is the RestoreJob flow, already rejected by the guard above.
  */}}
  {{- if and .Values.bootstrap.enabled (not .Values.backup.useSystemBucket) (not $credCfg.name) (not $hasInlineCreds) }}
  {{- fail "postgres: bootstrap.enabled=true requires S3 credentials: set backup.s3AccessKey+backup.s3SecretKey, backup.s3CredentialsSecret.name, or backup.useSystemBucket=true (with a backups.cozystack.io/RestoreJob)." }}
  {{- end }}
  {{- if .Values.bootstrap.enabled }}
  bootstrap:
    recovery:
      source: {{ .Values.bootstrap.oldName }}
      {{- if or .Values.bootstrap.recoveryTime .Values.bootstrap.backupID }}
      recoveryTarget:
        {{- with .Values.bootstrap.backupID }}
        backupID: {{ . | quote }}
        {{- end }}
        {{- with .Values.bootstrap.recoveryTime }}
        targetTime: {{ . }}
        {{- end }}
      {{- end }}
  externalClusters:
    - name: {{ .Values.bootstrap.oldName }}
      plugin:
        name: barman-cloud.cloudnative-pg.io
        parameters:
          # References the recovery ObjectStore rendered at the bottom of this
          # file, which carries the source cluster's S3 coordinates. serverName
          # (the source's S3 path prefix) rides on the plugin parameter, not the
          # ObjectStore (the plugin forbids serverName there). It must always be
          # set: the native path defaulted an absent serverName to the external
          # cluster's NAME (= oldName), but the plugin defaults it to the NEW
          # cluster's name — which would read the wrong S3 prefix on restore.
          barmanObjectName: {{ .Release.Name }}-recovery
          serverName: {{ .Values.bootstrap.serverName | default .Values.bootstrap.oldName }}
  {{- end }}

  resources: {{- include "cozy-lib.resources.defaultingSanitize" (list .Values.resourcesPreset .Values.resources $) | nindent 4 }}

  {{- include "postgres.flavorGuard" $ }}
  imageName: {{ include "postgres.imageName" $ }}
  enableSuperuserAccess: true
  {{- if .Values._cluster.scheduling }}
  {{- $rawConstraints := get .Values._cluster.scheduling "globalAppTopologySpreadConstraints" }}
  {{- if $rawConstraints }}
  {{- $rawConstraints | fromYaml | toYaml | nindent 2 }}
    labelSelector:
      matchLabels:
        cnpg.io/cluster: {{ .Release.Name }}
  {{- end }}
  {{- end }}
  postgresql:
    {{- if $tlsRequired }}
    {{- /*
      CloudNativePG offers TLS (ssl=on) but its built-in last rule, host all all
      all, also accepts plaintext, so a client choosing sslmode=disable gets an
      unencrypted session. User rules go after the operator's fixed rules
      (local peer, streaming_replica cert) and before that default rule, and the
      first match wins, so these two lines make remote sessions TLS-only.
      https://cloudnative-pg.io/documentation/current/postgresql_conf/#the-pg_hba-section
    */}}
    {{- /*
      Same password method as CloudNativePG's own default rule: md5 before
      PostgreSQL 14 (where password_encryption defaults to md5, and md5 also
      accepts SCRAM verifiers), scram-sha-256 from 14 on.
      pkg/management/postgres/configuration.go in cloudnative-pg.
    */}}
    {{- $pgMajor := trimPrefix "v" .Values.version | atoi }}
    {{- $authMethod := ternary "md5" "scram-sha-256" (lt $pgMajor 14) }}
    {{- /*
      With ssl turned off, hostssl never matches and the reject rule would refuse
      every remote session; stop with an actionable error instead.
    */}}
    {{- $sslParam := "" }}
    {{- if and .Values.postgresql .Values.postgresql.parameters }}
    {{- $sslParam = toString (dig "ssl" "" .Values.postgresql.parameters) | lower }}
    {{- end }}
    {{- if has $sslParam (list "off" "false" "0" "no") }}
    {{- fail "postgresql.parameters.ssl is off while tls.required is in effect (external: true or tls.required: true): enable ssl or set tls.required: false" }}
    {{- end }}
    pg_hba:
      - hostssl all all all {{ $authMethod }}
      - host all all all reject
    {{- end }}
    {{- /*
      Preloading is exposed as a closed allowlist rather than through the blocked
      shared_preload_libraries parameter. The parameter is free text and accepts a
      path, so it can point at a writable location; a bare name from this list can
      only resolve inside $libdir, which lives on the read-only image filesystem.
      The names below all ship with the CloudNativePG PostgreSQL image. The enum in
      values.schema.json is the primary guard; this check backs it up for renders
      that bypass schema validation. helm-unittest cannot reach it, since the schema
      rejects first, so hack/check-postgres-preload-allowlist.bats pins it instead.
    */ -}}
    {{- with .Values.postgresql.sharedPreloadLibraries }}
    {{- $allowedPreload := list "pg_stat_statements" "auto_explain" "pgaudit" "pg_prewarm" }}
    shared_preload_libraries:
      {{- range . }}
      {{- if not (has . $allowedPreload) }}
      {{- fail (printf "SECURITY: shared preload library %q is not allowed. Allowed: %s. Loading a library from an arbitrary path enables code execution inside the instance." . (join ", " $allowedPreload)) }}
      {{- end }}
      - {{ quote . }}
      {{- end }}
    {{- end }}
    parameters:
      {{- $defaults := dict "max_wal_senders" "30" }}
      {{- /*
        PostgreSQL sizes shared_buffers at 128MB whatever the container gets.
        The pool is shared memory, which the kernel cannot reclaim without
        swap, so every page that fills stays charged against the memory limit.
        A full pool is the whole limit on t1.nano and half of it on t1.micro,
        the default preset. A small or idle database never fills it, but a
        dump, index scans over a large table or a replica catching up after a
        failover can, and then the OOM killer takes the instance. Below 512Mi
        the default is therefore a quarter of the memory limit with a 16MB
        floor, capped at the memory request: CloudNativePG rejects a Cluster
        whose shared_buffers exceeds that request. From 512Mi up a quarter
        is at least 128MB, so nothing is
        rendered and PostgreSQL keeps its own default as before. An explicit
        shared_buffers in postgresql.parameters still wins. The limit is read
        through the same cozy-lib helper that fills spec.resources, so presets
        and resources overrides resolve exactly as they do there.
      */}}
      {{- $resources := include "cozy-lib.resources.defaultingSanitize" (list .Values.resourcesPreset .Values.resources $) | fromYaml }}
      {{- with $resources.limits.memory }}
      {{- /* 4194304 is 4Mi, so bytes divided by it is a quarter of the limit in MiB. PostgreSQL reads MB as MiB. */}}
      {{- $quarterMi := div (include "cozy-lib.resources.toFloat" . | float64 | int64) 4194304 }}
      {{- if lt $quarterMi 128 }}
      {{- $requestMi := div (include "cozy-lib.resources.toFloat" $resources.requests.memory | float64 | int64) 1048576 }}
      {{- $_ := set $defaults "shared_buffers" (printf "%dMB" (min $requestMi (max 16 $quarterMi))) }}
      {{- end }}
      {{- end }}
      {{- $params := merge (dict) .Values.postgresql.parameters $defaults }}
      {{- /* Security: Block parameters that enable arbitrary code execution (shell commands or .so loading) */ -}}
      {{- $dangerousParams := list "archive_command" "restore_command" "ssl_passphrase_command" "archive_cleanup_command" "recovery_end_command" "dynamic_library_path" "local_preload_libraries" "session_preload_libraries" "shared_preload_libraries" }}
      {{- range $key, $value := $params }}
      {{- $normalizedKey := lower $key }}
      {{- if has $normalizedKey $dangerousParams }}
      {{- fail (printf "SECURITY: Parameter '%s' is blocked. This parameter can enable arbitrary code execution and must not be set by tenants." $key) }}
      {{- end }}
      {{ $key }}: {{ $value | toString | quote }}
      {{- end }}

  minSyncReplicas: {{ .Values.quorum.minSyncReplicas }}
  maxSyncReplicas: {{ .Values.quorum.maxSyncReplicas }}

  monitoring:
    enablePodMonitor: true

  storage:
    size: {{ required ".Values.size is required" .Values.size }}
    {{- with .Values.storageClass }}
    storageClass: {{ . }}
    {{- end }}

  inheritedMetadata:
    labels:
      policy.cozystack.io/allow-to-apiserver: "true"
      app.kubernetes.io/name: postgres.apps.cozystack.io
      app.kubernetes.io/instance: {{ $.Release.Name }}
---
apiVersion: cozystack.io/v1alpha1
kind: WorkloadMonitor
metadata:
  name: {{ $.Release.Name }}
  labels:
    workloads.cozystack.io/resource-preset: {{ .Values.resourcesPreset | quote }}
spec:
  {{- /* Under active autoscaling the desired-replica count is set to the quorum FLOOR
         (effectiveMin), NOT the seeded spec.instances (activeSeed = max(replicas,
         effectiveMin)) and not KEDA's live autoscaled target: the seed is only the
         starting count, KEDA owns the runtime count via /scale and legitimately idles the
         cluster DOWN to effectiveMin under low load. NOTE the health decision does not
         actually read this field today — WorkloadMonitorReconciler gates Status.Operational
         solely on availableReplicas < minReplicas (below), so with minReplicas: 1 an idle
         autoscaled cluster never false-alarms regardless of what replicas says. replicas is
         the declared desired target (see the field doc: "desired number of replicas");
         pinning it to effectiveMin keeps that target honest — the floor KEDA never goes
         below, so should a future reconciler compare desired vs observed it still holds
         actual >= desired, rather than false-flagging every idle-to-floor as the live
         count (or the >floor seed) would. */}}
  replicas: {{ if $autoscaling }}{{ include "postgres.autoscaling.effectiveMin" . }}{{ else }}{{ .Values.replicas }}{{ end }}
  minReplicas: 1
  kind: postgres
  type: postgres
  selector:
    app.kubernetes.io/name: postgres.apps.cozystack.io
    app.kubernetes.io/instance: {{ $.Release.Name }}
  version: {{ $.Chart.Version }}
{{- if $renderBarman }}
---
# Backup ObjectStore for the barman-cloud plugin. Carries the S3/barman
# settings the deprecated spec.backup.barmanObjectStore used to hold; the
# Cluster references it by name via spec.plugins above. serverName is
# intentionally omitted (the plugin forbids it here and defaults it to the
# cluster name, preserving the s3://.../<cluster>/ layout).
apiVersion: barmancloud.cnpg.io/v1
kind: ObjectStore
metadata:
  name: {{ .Release.Name }}
spec:
  {{- if .Values.backup.retentionPolicy }}
  retentionPolicy: {{ .Values.backup.retentionPolicy | quote }}
  {{- end }}
  # Size the barman-cloud sidecar explicitly instead of inheriting the tenant
  # LimitRange default of 128Mi, and pin its S3 request checksum (rationale in
  # cozy-lib.barman.sidecarConfiguration).
  {{- include "cozy-lib.barman.sidecarConfiguration" . | nindent 2 }}
  configuration:
    destinationPath: {{ $destinationPath }}
    endpointURL: {{ $endpointURL }}
    {{- if $caCfg.name }}
    endpointCA:
      name: {{ $caCfg.name }}
      key: {{ $caKey }}
    {{- end }}
    s3Credentials:
      accessKeyId:
        name: {{ $credSecretName }}
        key: {{ $credAccessKey }}
      secretAccessKey:
        name: {{ $credSecretName }}
        key: {{ $credSecretKey }}
{{- end }}
{{- if .Values.bootstrap.enabled }}
---
# Recovery ObjectStore for bootstrap. Points at the source cluster's S3
# coordinates; referenced from externalClusters[].plugin above. serverName
# rides on that plugin parameter, not here.
apiVersion: barmancloud.cnpg.io/v1
kind: ObjectStore
metadata:
  name: {{ .Release.Name }}-recovery
spec:
  # Same sidecar configuration as the backup ObjectStore above.
  {{- include "cozy-lib.barman.sidecarConfiguration" . | nindent 2 }}
  configuration:
    destinationPath: {{ $destinationPath }}
    endpointURL: {{ $endpointURL }}
    {{- if $caCfg.name }}
    endpointCA:
      name: {{ $caCfg.name }}
      key: {{ $caKey }}
    {{- end }}
    s3Credentials:
      accessKeyId:
        name: {{ $credSecretName }}
        key: {{ $credAccessKey }}
      secretAccessKey:
        name: {{ $credSecretName }}
        key: {{ $credSecretKey }}
{{- end }}