Adds new oned.conf parameter to configure oned IP allocation mode.
REUSE_ADDRESS: Reuse the first available address instead of assigning
addresses in round-robin order for internal address ranges.
This PR adds Group VLAN authorization rules for Virtual Network self-provisioning
through VN Template instantiation and VNET updates derived from a VN Template.
The feature lets administrators define VLAN usage policies at group level. These policies are
evaluated when users instantiate VN Templates or update VNETs that were instantiated from a VN
Template. Direct VNET allocation is not treated as the tenant self-provisioning path; the intended
multi-tenant model is to expose network creation through reservations and VN Template
instantiation, while direct VNET allocation remains an admin-controlled operation.
Group VLAN rules are stored under `VLAN_RULES` as `RULE` vector attributes.
Rule format:
```txt
RULE = [
ID = "5,6,100-200",
SCOPE = "CVLAN",
VNTEMPLATE = "10,20-30"
]
Fields:
- ID: VLAN values allowed by the rule. Supports single values and ranges, comma-separated.
- Examples: "5", "5,6,100-200"
- SCOPE: VLAN attribute scope controlled by the rule.
- Supported scopes: VLAN_ID, OUTER_VLAN_ID, CVLAN, VLAN_TAGGED_ID, ANY
- VNTEMPLATE: optional VN Template IDs where the rule applies.
- Supports single values and ranges, comma-separated.
- -1 or missing value means the rule applies to any VN Template.
Examples:
RULE = [
ID = "100-200",
SCOPE = "VLAN_ID",
VNTEMPLATE = "10"
]
Allows VLAN_ID values from 100 to 200 when instantiating or updating VNETs derived from VN Template
10.
RULE = [
ID = "300,400-450",
SCOPE = "ANY",
VNTEMPLATE = "-1"
]
Allows the listed VLAN IDs/ranges for any supported VLAN scope and any VN Template.
Rules are parsed into an internal structured representation when group VLAN data is loaded or
updated. Each rule is normalized into:
- scope
- VLAN ID ranges
- VN Template ID ranges
This avoids reparsing raw template attributes during authorization checks.
Validation is applied to these input scopes:
- VLAN_ID
- OUTER_VLAN_ID
- CVLAN
- VLAN_TAGGED_ID
VLAN_ID and OUTER_VLAN_ID are validated as single integer values. CVLAN and VLAN_TAGGED_ID accept
range expressions such as 5,6-10.
For each requested VLAN value or range:
1. The input is parsed into one or more test ranges.
2. Rules are scanned for matching scope, including ANY.
3. Rules are filtered by VN Template ID:
- empty/-1 VNTEMPLATE matches all templates
- explicit ranges match only included template IDs
4. A requested range is accepted only if it is fully covered by a single rule range.
5. The check passes when all requested ranges are covered.
Automatic VLAN selection is rejected when the user belongs to a group with VLAN rules matching the
target VN Template, including global rules. This avoids bypassing explicit group VLAN policy
through automatic allocation.
VNETs instantiated from VN Templates now preserve the source VN Template ID as a first-class VNET
attribute:
<VNET>
...
<TEMPLATE_ID>...</TEMPLATE_ID>
...
</VNET>
TEMPLATE_ID = -1 means the VNET was created directly and was not instantiated from a VN Template.
This ID is immutable from user template updates:
- it is removed from the VNET template body on insert/update
- it is serialized as a top-level VNET attribute
- update operations use the stored value to validate VLAN authorization
A database migrator moves legacy TEMPLATE/TEMPLATE_ID values to top-level VNET/TEMPLATE_ID.
The tenant self-provisioning model for VNETs is based on controlled entry points:
- VNET reservations
- VN Template instantiation
Group VLAN authorization is enforced on VN Template instantiation and on updates to VNETs that were
instantiated from a VN Template.
Direct VNET allocation is not considered the tenant-facing self-provisioning path. It should remain
admin-controlled, as unrestricted VNET creation can expose other sensitive network attributes such
as PHYDEV, BRIDGE, and driver-specific configuration in addition to VLAN IDs.
Existing VNETs created from VN Templates may have the source template ID stored inside TEMPLATE/
TEMPLATE_ID. The migration step moves that value to top-level VNET/TEMPLATE_ID and removes it from
the template body.
This PR also updates the AR operations (add/del/update) so tenants can easily managed the VNET instantiations.
Existing directly-created VNETs will have no source VN Template and are treated as TEMPLATE_ID =
-1.
Existing group objects without VLAN rules are initialized with an empty VLAN_RULES section,
preserving current behavior until rules are explicitly configured.
Configuration compatibility:
- VLAN_ID, CVLANS, and AR/VLAN_ID are no longer expected to be handled through generic VNET
restricted attributes for the VN Template instantiation flow.
- OneCfg migration/update handling for configuration files will be addressed separately before
release.
co-authored-by: Pavel Czerny <pczerny@opennebula.io>
co-authored-by: Miguel E. Ruiz <mruiz@opennebula.io>
co-authored-by: dcarracedo <dcarracedo@opennebula.io>
* Fix range wrapping in multi-leases ranges (i.e. not use 8,9,0)
* Skip reservations and shared AR's in fsck.
* Do not reserve MAC addresses on VNET reservations
* Release MAC ID's on virtual network drop (with existing AR's)
* NEXT_INDEX is an internal attribute (cannot be set by user)
* Check size on update
* Skip global MAC ID release for reservation ARs because the parent AR owns the bitmap entry.
* Reject global MAC address ranges whose SIZE crosses the reserved 20-bit host block.
* Release reserved global MAC IDs when AR initialization fails after MAC assignment.
* Treat shared ARs as having no global MAC ID so bitmap release paths ignore them.
* Wrap multi-lease range scans correctly so allocation can find ranges starting at index 0.
* Keep IP6 in expanded security-group rules by removing allocator-only NEXT_INDEX from copied AR fields.
* Remove the leftover VNC bitmap debug dump from onedb fsck.
New configuration attribue MAC_GLOBAL_SPACE in oned.conf to enable the global
MAC address space generation mode.
MAC addresses are generated from a global pool preventing collisions across
VNETs. This does not apply to IP networks and limits the number of VNETs to
2^20, with a max of 2^20 leases per VNET.
This commit also implementes:
* A round-robin assignment of addresses. (jukka.jokiniva@qt.io)
* Optimizes the storing of the BitMap - do not store leading zeros
co-authored-by: Pavel Czerny <pczerny@opennebula.io>
co-authored-by: Jukka Jokiniva <jukka.jokiniva@qt.io>
co-authored-by: Pavel Czerný <pczerny@opennebula.systems>
co-authored-by: Frederick Borges <fborges@opennebula.io>
co-authored-by: Christian González <cgonzalez@opennebula.io>
* VNET updates trigger a driver action on running VMs with NICs in the
network.
* VNET includes a sets with VM status: updated, outdated, error and
updating. With VMs in each state.
* VNET flags error situations with a new state UPDATE_FAILURE.
* The same procedure is applied when an AR is updated (only VMs in that
AR are updated).
* A new options in the one.vn.recover API call enable to recover or
retry this VM update operations.
* The following attributes can be live-updated per VNET driver:
- PHYDEV (novlan, vlan, ovs driver)
- MTU (vlan, ovs driver)
- VLAN_ID (vlan, ovs driver)
- QINQ_TYPE (ovs driver)
- CVLANS (ovs driver)
- VLAN_TAGGED_ID (ovs driver)
- OUTER_VLAN_ID (ovs driver)
- INBOUND_AVG_BW (SG, ovs driver + KVM)
- INBOUND_PEAK_BW (SG, ovs driver + KVM)
- INBOUND_PEAK_KB (SG, ovs driver + KVM)
- OUTBOUND_AVG_BW (SG, ovs driver + KVM)
- OUTBOUND_PEAK_BW (SG, ovs driver + KVM)
- OUTBOUND_PEAK_KB (SG, ovs driver + KVM)
* New API call one.vm.updatenic, allows to update individual NICs
without the need of detach/attach (only QoS supported).
* Update operations for: 802.1Q, bridge, fw, ovswitch, ovswitch_vxlan
and vxlan network drivers.
* VNET attributes (old values) stored in VNET_UPDATE to allow
implementation of update operations. The attribute is removed after a
successful update.
* Updates to CLI onevnet (--retry option) / onevm (nicupdate command)
* XSD files updated to reflect the new data model
* Ruby and JAVA bindings updated: new VNET state and recover option, new
VM API call.
* Suntone and Fireedge implementation (lease status, recover option, new
states)
TODO: Virtual Functions does not support this functionality
iii
* VNETs include state to flag their configuration status
(READY/ERROR/LOCK)
* Hooks can be program based on VNET state transitions
* Include Java/Go/Ruby bindings
* New vCenter network drivers
* Place-holder to customize actions (create/delete) for other netowrk drivers
* Sunstone integration
* OneFlow syncs flow creation on VNET status
* Remove deprecated vcenter hooks and autoregistration
co-authored-by: Frederick Ernesto Borges Noronha <fborges@opennebula.io>
co-authored-by: Alejandro Huertas <ahuertas@opennebula.io>
co-authored-by: Pavel Czerny <pczerny@opennebula.systems>
* There are encrypted attributes for VMs, Hosts and VNets
* For VMs the user template is also encrypted
* For VNets its address ranges attributes are also encrypted
Co-authored-by: Alejandro Huertas <ahuertas@opennebula.systems>
Ruben S. Montero