The test resumed a live session, so notifications already
on the wire (notably, spurious health change notifications)
could arrive ahead of the initial status.
In this PR, we add LocalBackend.SuspendWatchNotifications,
which suspends a session as if it had fallen behind,
and update the test to suspend the session and drain
pending notifications before resuming it.
Updates tailscale/corp#51067
Updates tailscale/corp#50256
Updates tailscale/corp#50907
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Since edcc2c94, tailscaled closes the watch when a subscriber falls
behind. That doesn't work well for GUIs where closing the watch has side
effects. On Windows, the last client disconnecting can reset the backend
state unless unattended or always-on mode is enabled. On Android and
Apple platforms, nothing restarts a watch that ended this way, so the
UI silently stops updating.
Add ipn.NotifySuspendWhenBehind. A watcher that sets it stays connected
when it falls behind, but gets a Notify with Suspended set and nothing
else until the client resumes the session via the new resume-ipn-bus
LocalAPI endpoint or LocalBackend.ResumeWatchNotifications. Resuming
replays the initial Notify and new notifications follow from there.
Updates tailscale/corp#51067
Updates tailscale/corp#50256
Updates tailscale/corp#50907
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Since aa5da2e5f, a peer that control adds to a running client arrives as a
netmap delta rather than a full netmap. The delta path never re-resolved
the exit node prefs. An exit node selected by IP before it was in the
netmap stayed unresolved, and an auto exit node stayed on the blackhole
route, until tailscaled restarted or a full netmap arrived.
Re-resolve the exit node in UpdateNetmapDelta when the delta can change
the result. Any upserted peer qualifies while an ExitNodeIP is set. An
exit node being upserted or coming online qualifies while an auto exit
node is unresolved. The selected auto exit node going offline, losing its
exit routes, or being removed qualifies once one is selected. The last
case replaces the separate offline check, so the exit node is resolved
once per delta. The auto exit node check walks every peer, so it only
runs in those cases.
On the delta path, the resolved prefs ride in the same Notify as the peer
changes, sent while b.mu is held. resolveExitNodeLocked no longer sends a
Notify; its callers do. The full-netmap path still sends the prefs in a
separate Notify after the netmap.
Fixes#22012
Updates #22206
Signed-off-by: Brendan Creane <bcreane@gmail.com>
ipn/ipnlocal: resolve serve file redirects against the request path
http.FileServer sends a Location relative to the request URL, such as
"nested/" or "../file". fixLocationHeaderResponseWriter prefixed that
value with the mount point, which dropped every directory between the
mount point and the target. A request for /doc/subdir/nested was
redirected to /doc/nested/.
Resolve the relative Location against the original request path
instead. Collapse leading slashes in the result so a request path like
//host/dir cannot produce a protocol-relative Location.
Fixes#22049
Signed-off-by: Alex Castillo González <alex.castillog33@gmail.com>
Serve looked up its config with the name exactly as the client sent
it. Config keys are lowercase with no trailing dot, so a plain HTTP
request for "svelte.example.ts.net." or "Svelte.Example.TS.net" got a
404. HTTPS had the same gap for case. TLS rejects a trailing dot in
SNI but does not lowercase it, so a client that sent mixed-case SNI
failed the handshake with "no webserver configured". Browsers and curl
lowercase the hostname before connecting, which hid that path.
Lowercase the name and trim the trailing dot in both branches of
getServeHandler, and lowercase the SNI in the cert callback.
Fixes#21538Fixes#21986
Signed-off-by: Brendan Creane <bcreane@gmail.com>
The operator user could serve a path or Unix socket if tailscaled
found a sudo rule for them, but the check used the GECOS display name
and so failed for most users with a 401. The check cannot be repaired
safely: listing another user's sudo rules never prompts, so it proves
a rule exists, not that the user has authenticated. An operator who
had not entered their sudo password could serve any root-readable file
or root-only socket. Require root instead and say so in the error.
Fixes#21204Fixes#21985Fixes#21988
Signed-off-by: Brendan Creane <bcreane@gmail.com>
Serve deletes client-supplied `Tailscale-User-Login` (and similar) headers
before setting its own. However, `http.Header.Del` only matches the exact
canonical name. A client could send Tailscale_User_Login instead, which
was passed through to the backend.
For Go (and some other) backends, that's not an issue, but backends that
map headers to CGI-style variables (HTTP_TAILSCALE_USER_LOGIN) treat
both names the same. Thus, for Funnel requests (or tagged nodes), where
serve sets no identity headers, the backend could trust the spoofed
value. The same applies to Tailscale-App-Capabilities.
This fixes the issue by also deleting any header whose name matches
case-insensitively after replacing '_' with '-'.
This is similar to how other projects do this:
- Django drops them: https://www.djangoproject.com/weblog/2015/jan/13/security/
- nginx does not allow them by default: https://nginx.org/en/docs/http/ngx_http_core_module.html#underscores_in_headers
- Puma had a CVE and now drops them: https://nvd.nist.gov/vuln/detail/cve-2024-45614Fixestailscale/corp#50821
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Go's HTTP/1 server closes the request body once the handler starts
writing the response. The proxy's Transport may still be reading that
body, and when its final read fails it closes the backend connection
under the response it is copying. The client gets a truncated response.
Fixes#21894
Signed-off-by: Brendan Creane <bcreane@gmail.com>
Co-authored-by: Sam Jean <samj@tailscale.com>
Add an ipn.Prefs.Tailnet field, passed through controlclient.Options
into tailcfg.RegisterRequest.Tailnet, so a client can recommend or
require a tailnet at registration (e.g. to skip the tailnet picker when
the intent is already known) without impersonating MDM.
Previously this value could only come from the "Tailnet" syspolicy
setting. That setting still takes precedence as an administrative
override; the prefs value is used only when no policy is set.
Updates #22093
Signed-off-by: Adriano Sela Aviles <adriano@tailscale.com>
A retained legacy cert may have been issued by a different account even when no pre-adoption local key is available. Require a matching fingerprint before claiming a shared-account renewal replaces it.
Fixes#22041
Signed-off-by: Jaron Kramer <info@jkramertech.com>
Logging is quite aggressive and most of the logs can be hidden behind
component logging. A few logs are instead gated on if they changed or if
the original state was zero.
Updates #cleanup
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Similar to #20866 for 4via6, conn25 needs to block host-scoped
destinations. Due to the similarity between the two situations, the
matching is no longer in a 4via6-specific location. Since there is no
backwards compatibility to satisfy, there is no exception list for
conn25.
ipn/ipnlocal (for 4via6) and feature/conn25 now both use the new
package.
Updates tailscale/corp#50118
Updates tailscale/corp#46169
Change-Id: Ic3f9cccd2f5823a2ca48bd78607792b0fd6d7db9
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Allocate a fresh 16-bit ID for each QueryDNS request instead of using the
constant ID 1.
Updates tailscale/corp#48187
Change-Id: I9b47a3fbbef70f0462f1da4f3b29eb77cf31f9f0
Signed-off-by: James Tucker <james@tailscale.com>
Accept a caller context in LocalBackend.QueryDNS and pass it to the
internal resolver. Use the HTTP request context for localapi DNS queries
so cancellation and deadlines bound the lookup.
Updates #8338
Change-Id: I1bb8ec0b779c883ec40d52063adf25ff36cf43e3
Signed-off-by: James Tucker <james@tailscale.com>
The unix-socket reverse proxy checked its backend against the tailscaled
socket only when the handler was built, but each backend connection
re-resolved the path from scratch. A backend that was benign at config
time could later be replaced with a symlink to the tailscaled socket by
anyone able to write to its directory, and the next dial followed it.
The proxy dials as root, so the same swap could redirect a serve or
funnel backend at any root-only unix socket on the host.
Move the check to the dial itself, in a dialServeUnixSocket method
shared by the HTTP transport, the h2c transport and the TCP-forward
handler, all of which previously dialed unix on their own. It refuses
tailscaled's socket with ErrProxyToTailscaledSocket immediately before
connecting.
On Linux 5.6 and newer, the dial pins the resolved socket inode with
openat2(2): an O_PATH descriptor opened with RESOLVE_NO_MAGICLINKS,
and RESOLVE_BENEATH under the socket's parent directory where the path
allows it, or by whole path otherwise. The pinned file is checked
against the tailscaled socket, and the connection is made to the pinned
file through /proc/self/fd, so replacing the path cannot retarget the
connect. On kernels without openat2(2), and on other platforms, the
path is dialed directly.
The connected peer is re-checked after the dial on every platform. The
peer address of a path-bound listener is the path the socket was bound
to, not the path that was dialed, so a symlink swapped in before the
dial is identified after the connect. This check is best-effort:
connections that have no determinable peer name are allowed.
Fixestailscale/corp#50481
Change-Id: Iae5db207519db9c139a512c0427dce3dfa3ca672
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: Sam Jean <samj@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
tailscale serve --tcp=<port> unix:<path> dialed the target socket with
no check, so pointing it at tailscaled's own LocalAPI socket proxied a
tailnet peer straight into the LocalAPI. The LocalAPI authorizes a
unix-socket caller by the peer credentials of the dialing process --
tailscaled itself, as root -- so the peer got a write-capable LocalAPI
and could change the node's settings.
The HTTP proxy path already refused this via isTailscaledSocket; the
TCP-forward path, added later, did not. Reject it at config-set time in
setServeConfigLocked so "tailscale serve" fails up front, and keep a
dial-site guard returning ErrProxyToTailscaledSocket as a backstop for
configs set by other means.
RELNOTE: tailscale serve no longer proxies to tailscaled's own socket
Fixestailscale/corp#50425
Change-Id: I5ed02e83d32bdfb09c8164907bf38cabcc406169
Signed-off-by: Sam Jean <samj@tailscale.com>
ListenSSH now documents its session trust model and takes an
authorization callback. A session is accepted from any peer that the
tailnet ACL's TCP rules allow and that resolves with WhoIs. The server
performs no SSH client authentication, does not map the peer to a local
user, and does not record the session. The application is responsible
for what each session does. Set Server.SSHAuthCallback to reject
unwanted sessions before they reach Accept. A rejected session is
refused at open with exit status 1 and is never yielded to Accept. The
callback is plumbed through LocalBackend.ListenSSH and HookListenSSH.
With no callback, behavior is unchanged.
The listener's SSH server runs session channels only, with no port
forwarding. Closing the listener closes the accepted connections.
- DisablePTYEmulation runs on every session, so a PTY session passes
data through unchanged instead of translating "\n" to "\r\n". The
translation corrupted binary data read through the net.Conn
interface. Window changes are drained for every session, even when
the application never calls Pty, because gliderssh writes window
changes from the session request loop and an undrained channel
blocks the session's requests. Pty drops window changes when the
application is not reading them.
- The handshake is bounded by TS_SSH_LOGIN_GRACE_TIME, default 120
seconds, the same as sshd's LoginGraceTime.
- TS_SSH_IDLE_TIMEOUT bounds connections with no SSH traffic. It is 0
by default, and zero applies no bound, so quiet but live sessions
are not closed by default. Both timeout knobs accept a Go duration
such as "90s" or a bare number of seconds.
- Accepted sessions wait for Accept in a bounded queue. When the queue
is full, further sessions are refused, so an application that stops
calling Accept parks only a bounded number of sessions.
Updates tailscale/corp#50380
Signed-off-by: James Tucker <james@tailscale.com>
`serveWebHandler` wrote each mount's accepted app capabilities into the connection-scoped serveHTTPContext. Concurrent h2 streams of one TLS serve connection share that struct, so a request to a mount accepting no capabilities could be proxied carrying another mount's `Tailscale-App-Capabilities` header, letting backends that trust the header authorize the wrong mount.
This change fixes that issue by storing accepted capabilities per-request via a context value instead of a field on the shared struct.
Updates tailscale/corp#50380
Change-Id: I5d0a4a02266018f342ba75a1b3291176738ce05b
Signed-off-by: Mike Jensen <mikej@tailscale.com>
This interprets HiddenNetworkDevices per watch session and sends GUI visibility metadata for peers (without filtering them). We refresh the visibility snapshot when policy or peer membership changes.
Updates tailscale/corp#44104
Signed-off-by: kari-ts <kari@tailscale.com>
The immediate use case is feature/conn25 identifying the connector peer
node that responds to a DoH request.
Updates tailscale/corp#46169
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
Adds tests that only a 404 map response wraps ErrNodeRemoved, that the
node-removed warning and NeedsLogin state are cleared by a new netmap or
a profile switch, and that a node restarted after it was deleted shows
the warning and reaches NeedsLogin.
Updates #18700
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
When a node is deleted, control answers its map requests with a 404 and
the client keeps retrying in its current state, so watchers like
containerboot can't tell a deleted node from a lost connection. This
wraps that error in ErrNodeRemoved, and LocalBackend then moves to
NeedsLogin and sets a node-removed health warning, both cleared on the
next netmap or profile switch. It repurposes #18701 as a stopgap until a
broader fix, such as structured errors from control, exists.
Updates #18700
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Updates tailscale/corp#49775
Track authoritative NXDOMAINs for at least 60 seconds on macOS and iOS (where our short SOA ttls are not properly respected), and flush when a cached name becomes resolvable. Compile a no-op tracker elsewhere and avoid duplicate VPN reconfiguration on link changes.
On a fresh install the first netmap arrives before the first netcheck
report, so auto exit node resolution installed the blackhole
ipn.UnresolvedExitNodeID and nothing re-resolved it once the report
arrived. Refresh in setNetInfo while the exit node is still unresolved.
Fixes#18199
Signed-off-by: Brendan Creane <bcreane@gmail.com>
Since 7e609b258 (v1.102), quad-100 looks up MagicDNS names in
nodeBackend.nodeByName, which also holds short-name keys for in-process
dials. So a query for "foo." matched peer "foo.tail-scale.ts.net" and
was answered with its Tailscale IP. 1ec348784 fixed that for MagicDNS
off; this fixes it for MagicDNS on, too, matching pre-1.102 behavior.
The OS applies the search domain to short names before they reach
quad-100, so a single-label query is a root zone name, not a tailnet
name, and must be forwarded (e.g. to LAN mDNS/LLMNR or a global
nameserver). Short names still work for in-process dials via
NodeByName.
Updates #20789
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ic8199a96cf79178210c9a85e0cebfb46567a894a
Injected packets now arrive on a queue of their own rather than being
multiplexed onto queue 0. Wrapper.Read is deprecated. It still reads the
first kernel-backed queue, but from now on no single queue of a Wrapper
sees every packet.
Deletes the poll goroutine, the bufferConsumed token, the vectorOutbound
channel, tunVectorReadResult, a full-size slab, and the copy of every
accepted packet between the two slabs.
wireguard-go now runs an extra TUN reader goroutine, a net wash compared
to running our poll routine.
Measured on c8gn.2xlarge, Ubuntu 24.04, Kernel v6.14, tailscaled under
load from two peers, each running iperf3 -P8.
tx mean rx mean cores
main 7.00 8.84 3.49
branch 8.94 8.86 3.95
Bumps wireguard-go pin to tailscale/wireguard-go@e61b6b7811.
Updates tailscale/corp#37878
Change-Id: Ide0e8a9f345371b2747fad59dd2bf963c8af5b63
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
This resolves unscoped policy requests to the connected user's effective
policy instead of the default scope.
Tested by changing the device-scoped AlwaysOn policy at runtime and
running tailscale syspolicy reload. Cofnirmed tailscaled immediately
enforced the updated policy with tailscale down
Updates tailscale/corp#41463
Signed-off-by: kari <kari@tailscale.com>
This fetches the effective policy snapshot for the user scope instead of
using the default policy scope, ensuring that policy change
notifications reflect the correct user-scoped effective policy.
Updates tailscale/corp#41463t
Signed-off-by: kari <kari@tailscale.com>
LocalBackend named appc.AppConnector in its appConnector field, in the
field's constructor call, and in the AppConnector accessor, so even
builds with ts_omit_appconnectors linked the appc package and its
dependencies. The buildfeatures.HasAppConnectors checks let the linker
drop the code but could not remove the import.
Add a build-tag-gated type for the field: appcAppConnector is an alias
for appc.AppConnector by default, and in ts_omit_appconnectors builds it
is an empty struct with no-op versions of the methods local.go calls, so
the shared code still type checks. The constructor call moves behind a
newAppConnector helper in the same gated file, and the AppConnector
accessor keeps its *appc.AppConnector signature there, with a nil-
returning version in the omitted build.
This takes tailscale.com/appc out of depaware-min.txt and
depaware-minbox.txt. Add a DepChecker test to keep it out; it also sets
ts_omit_conn25, since conn25 uses appc as well.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia7e2d9c4f1b8e6a3d5c0f2b7e9a1c4d6f8b0e2a5
A JSON null for a service or for an endpoint target unmarshals as a nil
pointer, and loadConfigV0 dereferenced it without a check. This made
"tailscale serve set-config" panic. Return an error that names the
service or endpoint instead.
Fixes#21534
Signed-off-by: Brendan Creane <bcreane@gmail.com>
dnsConfigForNetmap called appc.AppDNSRoutes directly to synthesize the
conn25 split DNS routes from the self node's capability map, which was
the one place node_backend.go depended on the appc package and was
marked with a TODO to make it a hook.
Add ipnext.Hooks.ExtraDNSRoutes, which returns extension-supplied split
DNS routes. authReconfigLocked calls it and passes the result into
dnsConfigForNetmap, which adds the routes alongside the netmap's own
routes with the same UseWithExitNode handling as before.
The hook takes no arguments: the conn25 extension computes the routes
in its OnSelfChange handler and clears them on a switch to a different
node, and it already tracks the AppConnector.Advertise pref from
ProfileStateChange. Both of those hooks fire before the reconfig that
consults ExtraDNSRoutes, so the state is current. The conditions are
unchanged: no routes when this node itself advertises as an app
connector, and none without the experimental capability.
Updates tailscale/corp#37125
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I6c2e9f4b8a1d3e7f5c0b2a9d8e6f4c3b1a7d5e9f
The NL prefix is one of the last references to the "Network Lock" name
which we're cleaning up.
Updates tailscale/corp#37904
Change-Id: I751194e0b49447e97a65ed6975e3da680226ce85
Signed-off-by: Alex Chan <alexc@tailscale.com>
updates tailscale/corp#33007
When a selected exit node can't carry internet traffic due to a misconfiguration (wrong ID, node
deleted, routes removed, etc), blackhole default routes are installed and all internet traffic is dropped.
That is the correct behavior -- better to drop than leak to the local network -- but it was entirely silent:
the stable-ID lookup in nodeBackend.updateRouteManagerPrefs misses without a log line, and Status
leaves ExitNodeStatus nil. The user sees a healthy Tailscale with no internet. If an admin fat-fingers the
exit node name in an IT policy, for example, it's easy to break every node with zero feedback.
This adds an exit-node-unavailable health warning covering every way the selection can fail to carry
traffic (short of reachability which is a separate concern), reported via exitnodehealth.ArgExitNodeReason.
The warning names the exit node, caching its display name while it is still a peer so the name survives
its departure, and falls back to the stable ID or IP. When the selection is mandated by the ExitNodeID
or ExitNodeIP policy settings, the message tells the user to contact their network administrator instead
of suggesting they pick another exit node.
To test this, set a forced exit node policy with some random ip or node id. The warning has a 5 second
threshold. It should clear as soon as you change to a proper exit node.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Several features with ts_omit build tags were still linked into
minimal builds because LocalBackend called into them unconditionally,
so the linker couldn't prove them unreachable. Guard those call sites
with their buildfeatures constants:
* app connectors: only subscribe to route update and store events
when app connectors are included; appc is their only publisher.
This also drops AdvertiseRoute and UnadvertiseRoute.
* client update: only subscribe to the tailnet default auto-update
event when auto-updates are supported, as that's all it affects.
* syspolicy: only register the policy change watch when system
policy support is included.
* advertise routes and exit nodes: only validate AdvertiseRoutes
when one of the two features is included.
* netstack: only netstack consults the intercepted TCP ports, so
don't build the port matching func without it.
* ssh: don't check SSH prefs, report the "SSH on but unusable"
health message, or intercept port 22 without SSH support. The
RunSSH pref is still accepted without effect, as before; port 22
was previously intercepted by netstack builds without SSH.
* web client: don't track whether the web client should run when
it's not included.
* tailnet lock: peers marked UnsignedPeerAPIOnly are only special
in that tailnet lock skips their signature checks, and the packet
filter check guards that exemption. Without tailnet lock, all
peers from control are trusted anyway, so skip the check.
This reduces the size of a build_dist.sh --min tailscaled binary on
linux/amd64 by 65,536 bytes (0.5%), about 28 KB of it in ipnlocal and
most of the rest in eventbus and slices generic instantiations for the
events no longer subscribed to.
Updates #12614
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I8f4d4c0779e84f46f3b076d0fb35514c69a52d8f
Peer-change watchers upsert PeersChanged, so peers missing from a full
netmap were never removed from their view.
Updates #15660
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
A peer removal sent with any MapResponse field that forces a full netmap
rebuild never reaches IPN bus watchers; these tests fail.
Updates #15660
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
FreeBSD is a weak-host stack like Linux, so a LAN-adjacent machine can
send a SYN for a node's Tailscale IP to the node's NIC and get the
kernel's SYN-ACK from the peerapi port, confirming which tailnet
identity that MAC address belongs to. Linux closes this with
SO_BINDTODEVICE and macOS/iOS with IP_BOUND_IF, but FreeBSD has no
per-socket interface bind (only IP_RECVIF and SO_SETFIB).
Instead, treat FreeBSD like Android: when netstack is present, don't
create a kernel-level peerapi listener at all and use the fake listener,
since netstack already intercepts peerapi connections from peers in
userspace and the kernel socket only ever served the local host. When
netstack is compiled out (ts_omit_netstack), the kernel listener is the
only way to serve peers, so keep it and log that it must be restricted
with pf.
Along the way, tailscaled's own pf source NAT rule on FreeBSD turned out
to rewrite the source of such a SYN-ACK to the LAN IP and a random port,
so a plain connect() from the LAN never completes. The SYN-ACK still
leaks, though, so the natlab test now watches for SYN-ACKs on the
attacker's NIC with tcpdump instead of checking for a completed
handshake, and gains a FreeBSD variant. With the fix disabled, that
variant fails on the leaked SYN-ACK from the peerapi port.
Fixes#21419
Updates tailscale/corp#48248
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I0d2de4ebc9bae28450d500bd7b6ddbfa70f9052f
The debug-log endpoint was gated on PermitRead, which any local user connecting to the world-writable tailscaled socket passes. Although forged log entries are always possible, we should limit the ability for local users to influence that flow with respects to a given node.
This change requires PermitWrite for debug-log, matching the trust level of every other mutating debug endpoint. Also add a buildfeatures.HasDebug guard to debug-dial-types for parity with serveDebug.
Fixestailscale/corp#48143
Change-Id: I0c0044b6b44fe7cbfb6734ac18bca3dc36eaffbf
Signed-off-by: Mike Jensen <mikej@tailscale.com>
On Linux, serve's kernel listeners are now bound to the tunnel interface, which
stops LAN-adjacent hosts completing a handshake with the listener (see #21420).
That bind drops packets that arrive on another interface addressed to the node's
Tailscale IP, which breaks the Kubernetes operator's
`tailscale.com/experimental-forward-cluster-traffic-via-ingress` ingress feature.
Add `TS_SERVE_ALLOW_ALL_INTERFACES`, which makes serve's listener skip the
interface bind so those packets are answered again. It applies only to serve
listeners, not the web client listener, which shares the same code but stays
bound. It only affects serve; the peerapi listener stays bound too. This is a
targeted opt-out for the operator to set on the affected proxies. Enabling it
re-exposes the serve listener to the local network.
Updates tailscale/corp#48248
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
The store path was hardcoded to %ProgramData%\Tailscale\audit-log.json on
Windows, so a tailscaled run by a regular user with its own --statedir
logged "[unexpected] failed to create audit log store ... Access is denied"
on every profile switch. Use the backend's TailscaleVarRoot when it is
known, falling back to the platform default otherwise. For the Windows
service the state directory is %ProgramData%\Tailscale, so its path is
unchanged; an explicit SetStoreFilePath still wins.
Updates #2791
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I5d7f9b1c3e5a7c9e1b3d5f7a9c1e3b5d7f9a1c3e
Registering the session state callback enumerates the existing desktop
sessions, which fails for a tailscaled run by an unprivileged user
(WTSEnumerateSessions returns "No more data is available"). That was
reported as "init failed", which reads like a bug. Such a tailscaled has
no other users' sessions to track, so report it as skipping the extension,
the same way an unavailable session manager already is.
Updates #2791
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I7f9b1d3e5a7c9e1b3d5f7a9c1e3b5d7f9a1c3e5b
The portlist extension publishes a PortlistServices event, but the
LocalBackend subscriber accepted the underlying slice type instead. The
event bus matches event types exactly, so endpoint updates were dropped
before reaching Hostinfo.Services.
Add a regression test covering the event-to-Hostinfo path.
Fixes#20192
Signed-off-by: YewFence <hello@yewfence.dev>
Linux is a weak-host stack, so a LAN-adjacent machine can complete a
TCP handshake with a node's peerapi listener by sending a packet to
the node's Tailscale IP, with no credentials and no tailnet
membership.
macOS and iOS already bind the listener to the tunnel interface, and
Windows is protected by its strong host model, so Linux tun mode was
the only platform that leaked.
Bind the Linux listener to the tunnel interface as well, so the
kernel only answers connections that arrive from the tunnel or from
the local host. A natlab VM test verifies that a same-LAN machine can
no longer complete the handshake, while local and peer peerapi keep
working.
FreeBSD has the same weak-host exposure but no per-socket equivalent,
so handling it there with pf is a TODO (#21419).
Updates tailscale/corp#48248
Reported-By: Samuel Keeley (@keeleysam)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I5f8501b0938c9f7aa39c4c12ebddd988c72e89bf
If the network comes up during the few milliseconds NewLocalBackend
takes, tailscaled starts with its control client paused and never
unpauses: the interface state snapshot was taken before the netmon
subscription (kept late since #17252), so a change published in between
reached nobody. #21261 hit it on fast-booting NixOS microVMs, and it was
behind the natlab TestEasyEasy CI flake, where a gokrazy node's DHCP
lease landed in that window and "tailscale up" hung at "awaiting
unpause".
Re-read netmon's state after subscribing rather than subscribing before
the snapshot (as #21281 proposed), which would bring back the #17252
data race and let a fresh delta be overwritten by the stale snapshot.
netmon.New and the userspace engine had the same shape of gap between
their snapshot and their subscription; close those too.
Under CPU pressure the hang reproduced in 1 of 22 TestEasyEasy runs
before and 0 of 120 after.
Thanks to @c-vigo for the detailed diagnosis in #21261 and to @zzz-yu
for pointing out this problem and proposing a fix in #21281!
Fixes#21261
Updates #14902
Updates #19126
Updates #deflake
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ifa21f8055a85321a5afda7800140fc5045c6ce08
This method has been deprecated for four months; replace all uses with
the Peers or NoPeers equivalents.
Updates #12542
Change-Id: I7b5800d0d92775839dbfb6021751a5dfacc53d2f
Signed-off-by: Alex Chan <alexc@tailscale.com>
Add Node.StableTailnetID for control to send the current tailnet's
stable ID on the self node. Expose it as CurrentTailnet.StableID in
LocalAPI status and `tailscale status --json`, and display it in
`tailscale whoami`.
Bump CurrentCapabilityVersion to 148.
Updates #14375
RELNOTE: Show the current tailnet's stable ID in status JSON and whoami.
Change-Id: I0525ff735de8113c8d124045a94e00c19a5a02e2
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
The profile switch log lines passed cp.UserProfile().LoginName without
calling it, so they printed "%!q(func() string=0x7ff7141cd060)" in place
of the login name.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4e6a8c0b2d5f7a9c1e3b5d7f9a1c3e5b7d9f1a3c