Aleksei Sviridkin
9c025fa2b1
## What this PR does A local build with `PUSH=0` no longer publishes the packages artifact. Before this change, `make image-packages` in `packages/core/installer` ran `flux push artifact` no matter what `PUSH` was set to, and then wrote the pushed digest into `values.yaml`. The `chart` target in the same Makefile already respects `PUSH`. With `PUSH` set to anything other than 1, the target now skips both the push and the digest stamp. It prints one line saying so and leaves the committed `platformSourceUrl` and `platformSourceRef` as they are. It still writes `packages/core/platform/.build-revision`, which is gitignored. I chose to skip the stamp instead of computing a local digest, because every reader of that value needs a digest that exists in the registry. The chart passes `platformSourceRef` to the operator as `--platform-source-ref`, and Flux then pulls `cozystack-packages@<digest>` from the registry. The release scripts `verify-promoted-packages.sh`, `promote-packages-artifact.sh`, `stitch-multiarch.sh` and `nightly-mirror.sh` also treat it as a registry digest. A digest of an artifact that was never pushed points at nothing. On main an unpushed run would not even get that far, since the recipe dies at `test -n "$DIGEST"`. The gate is a make-level `ifeq ($(PUSH),1)`, so it reads whatever `PUSH` ends up as after `hack/common-envs.mk`. On main that means `PUSH=0` on the command line. I also applied the `common-envs.mk` change from #4654 locally, which takes `PUSH` from the environment and makes `LOAD=1` default it to 0. With that applied, a dry run shows no push and no stamp for `PUSH=0` in the environment, for `LOAD=1`, and for `PUSH=0` on the command line, while `LOAD=1 PUSH=1` and an empty `PUSH` still push. CI is not affected, because no workflow sets `PUSH` or `LOAD` and `PUSH` stays at 1. I dry-ran the three CI invocations of this Makefile before and after the change, on main and again with #4654 applied: - `tags.yaml`, release stitch step: `make -C packages/core/installer image-packages chart` with `REGISTRY`, a release tag as `IMAGE_TAG`, and `PUSHED_TAGS_LOG` - `pull-requests.yaml`, installer step of a same-repo PR: `make -C packages/core/installer image` with a `pr-N-sha` tag, `PLATFORM=linux/amd64`, `BUILDER`, and an empty `OCI_EXPORT_DIR` - `build-main.yaml` and `build-release.yaml`: `make build`, which runs the installer `image` target with defaults ```text $ diff --recursive before/ after/ # tags.txt pr.txt build.txt $ echo $? 0 ``` There is one side effect. `OCI_EXPORT_DIR` forces `PUSH := 0`, so running `image-packages` with it set no longer pushes, where before it would have tried an anonymous push. No CI path does that. The fork PR build already runs only `pre-checks image-operator` for the installer, and the `make -n ... image OCI_EXPORT_DIR=/oci` scan in `e2e-fork.yaml` greps only the `.oci.tar` names, which this change does not touch. The new test dry-runs the target in both modes. With `PUSH=0` there must be no `flux push artifact` and no `platformSourceRef` stamp; with `PUSH` at its default, both must be present. The first test fails on main. I mutated the guard three ways, and each time only the matching test went red: - condition forced true: the `PUSH=0` test fails - compared against 2: the default-path test fails - `endif` moved up so only the push is gated: the `PUSH=0` test fails on the stamp check One limitation is left as a follow-up. The test's `env -u PUSH -u LOAD` only isolates it once #4654 lands, because on main a file assignment wins over the environment anyway. It does not cover `PUSH=0` coming in through `MAKEFLAGS`, so `make bats-unit-tests PUSH=0` would fail the default-path test here and the ordering check in `hack/stitch-multiarch_test.bats`. Nothing runs the suite that way today. If that changes, passing an explicit `PUSH=1` on the default-path `make` lines, or unsetting `MAKEFLAGS` the way `hack/bats-unit-keep-going.bats` does, would fix it. ### Screenshots Not a UI change. ### Downstream repositories - [x] No downstream repository is affected by this change - [ ] [cozystack/website](https://github.com/cozystack/website) - follow-up: - [ ] [cozystack/terraform-provider-cozystack](https://github.com/cozystack/terraform-provider-cozystack) - follow-up: - [ ] [cozystack/ansible-cozystack](https://github.com/cozystack/ansible-cozystack) - follow-up: - [ ] [cozystack/ccp](https://github.com/cozystack/ccp) - follow-up: - [ ] [cozystack/talm](https://github.com/cozystack/talm) - follow-up: - [ ] [cozystack/cozyhr](https://github.com/cozystack/cozyhr) - follow-up: - [ ] [cozystack/cozy-proxy](https://github.com/cozystack/cozy-proxy) - follow-up: - [ ] [cozystack/cozystack-telemetry-server](https://github.com/cozystack/cozystack-telemetry-server) - follow-up: - [ ] [cozystack/external-apps-example](https://github.com/cozystack/external-apps-example) - follow-up: - [ ] [cozystack/examples](https://github.com/cozystack/examples) - follow-up: - [ ] [cozystack/community](https://github.com/cozystack/community) - follow-up: The website's `development.md` tells developers to run `make image-packages` with `REGISTRY` set to their own registry. That is the default `PUSH=1` path, and it works as before. Neither the website nor ccp mentions `PUSH=0` for this target. Closes #4656 ### Release note ```release-note fix(installer): `make image-packages` no longer pushes the cozystack-packages artifact or stamps its digest into values.yaml when PUSH=0. ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * You can run `image-packages` with `PUSH=0` to skip publishing the artifact and keep the committed platform source reference unchanged. * When pushing is enabled, the command publishes the artifact and updates the platform source URL and digest-based reference. <!-- end of auto-generated comment: release notes by coderabbit.ai -->
Cozystack
Cozystack is a free and open-source platform and framework for building clouds.
Cozystack is a CNCF Sandbox project that was originally built and sponsored by Ænix.
With Cozystack, you can transform a bunch of servers into an intelligent system with a simple REST API for spawning Kubernetes clusters, Database-as-a-Service, virtual machines, load balancers, HTTP caching services, and other services with ease.
Use Cozystack to build your own cloud or provide a cost-effective development environment.
Use-Cases
-
Using Cozystack to build a public cloud
You can use Cozystack as a backend for a public cloud -
Using Cozystack to build a private cloud
You can use Cozystack as a platform to build a private cloud powered by Infrastructure-as-Code approach -
Using Cozystack as a Kubernetes distribution
You can use Cozystack as a Kubernetes distribution for Bare Metal
Documentation
The documentation is located on the cozystack.io website.
Read the Getting Started section for a quick start.
If you encounter any difficulties, start with the troubleshooting guide and work your way through the process that we've outlined.
Versioning
Versioning adheres to the Semantic Versioning principles.
A full list of the available releases is available in the GitHub repository's Release section.
Contributions
Contributions are highly appreciated and very welcomed!
In case of bugs, please check if the issue has already been opened by checking the GitHub Issues section. If it isn't, you can open a new one. A detailed report will help us replicate it, assess it, and work on a fix.
You are welcome to take on the fix yourself. Commits are used to generate the changelog, and their author will be referenced in it.
If you have a concrete feature request, open an issue. For a cross-cutting or architectural change, open a design proposal in the community repo. For questions or early ideas, use GitHub Discussions. See CONTRIBUTING.md for the full routing.
Community
You are welcome to join us in #cozystack, on either CNCF Slack (get an invite) or Kubernetes Slack (get an invite), in our Telegram group, and at our community meetings. Add them to your Google Calendar or iCal for convenience.
Project documents
| Document | What it covers |
|---|---|
| Governance | How decisions are made and who makes them |
| Contributor Ladder | How to grow from contributor to maintainer |
| Maintainers | Who maintains the project |
| Code of Conduct | What we expect of each other |
| Security Policy | Reporting a vulnerability, and which releases get fixes |
| Adopters | Who runs Cozystack in production |
| Roadmap | Where the project is going |
License
Cozystack is licensed under Apache 2.0.
The code is provided as-is with no warranties.
Commercial Support
A list of companies providing commercial support for this project can be found on official site.